Multiple sealing insert SKINTOP® DIX-M 50118, Multiple sealing insert, M 50, Number of cable entries: 11, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 1132694

Multiple sealing insert SKINTOP® DIX-M 50164, Multiple sealing insert, M 50, Number of cable entries: 16, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 1230615

Mehrfachdichteinsatz, M 50, Anzahl der Leitungseinführungen: 6St., Bohrungsdurchmesser: 8mm, schwarz
Sales unit: 10 pieces
Lieske Part No.: 256491

Multiple sealing insert SKINTOP® DIX-M 20250 FKM, Multiple sealing insert, M 20, Number of cable entries: 2 pieces, Bore diameter: 5 mm, green, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 100 pieces
Lieske Part No.: 1319895

Multiple sealing insert SKINTOP® DIX-M 20260 FKM, Multiple sealing insert, M 20, Number of cable entries: 2 pieces, Bore diameter: 6 mm, green, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 100 pieces
Lieske Part No.: 1319894

Multiple sealing insert SKINTOP® DIX-M 40969 FKM, Multiple sealing insert, M 40, Number of cable entries: 9, Bore diameter: 6.9mm, green, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and They are also oil-resistant They are extremely heat-resistant and suitable for use at extreme positive temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry Their blue color makes them easy to distinguish from food They are also extremely flexible at low temperatures and suitable for use at extreme minus temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 25 pieces
Lieske Part No.: 1320167

Sealing insert SKINTOP® DIX-M 25190 SLOTTED, sealing insert, M 25, number of cable entries: 1pc., bore diameter: 9mm, black, areas of application: to be used instead of the standard sealing insert in the SKINTOP® cable gland, for use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil resistant material, benefits: protection class IP 68 can be achieved provided the bores are optimally occupied, high functional reliability thanks to optimal strain relief, special design with round pre-drilled hole and longitudinal cut for easy insertion of one or more pre-assembled data cables
Sales unit: 50 pieces
Lieske Part No.: 1867966

Multiple sealing insert SKINTOP® DIX 7225, Multiple sealing insert, PG 7, Number of cable entries: 2pcs., Bore diameter: 2.5mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 737420

Multiple sealing insert SKINTOP® DIX 7417, Multiple sealing insert, PG 7, Number of cable entries: 4, Bore diameter: 1.7mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 819763

Multiple sealing insert SKINTOP® DIX 9230, Multiple sealing insert, PG 9, Number of cable entries: 2 pieces, Bore diameter: 3 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 699626

Sealing insert SKINTOP® DIX ASI-M 20, sealing insert, M 20, number of cable entries: 1pc., black, areas of application: to be used instead of the standard sealing insert in the SKINTOP® cable gland, for use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil resistant material, benefits: protection class IP 68 can be achieved if the holes are optimally occupied, high functional reliability thanks to optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 296022

Multiple sealing insert SKINTOP® DIX 11225, Multiple sealing insert, PG 11, Number of cable entries: 2pcs., Bore diameter: 2.5mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 616861

Multiple sealing insert SKINTOP® DIX 11240, multiple sealing insert, PG 11, number of cable entries: 2 pieces, bore diameter: 4 mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 430883

Multiple sealing insert SKINTOP® DIX 11330, Multiple sealing insert, PG 11, Number of cable entries: 3pcs., Bore diameter: 3mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 382185

Multiple sealing insert SKINTOP® DIX 13250, Multiple sealing insert, PG 13.5, Number of cable entries: 2 pieces, Bore diameter: 5 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 972626

Multiple sealing insert SKINTOP® DIX 13340, Multiple sealing insert, PG 13.5, Number of cable entries: 3pcs., Bore diameter: 4mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 229561

Multiple sealing insert SKINTOP® DIX 13440, Multiple sealing insert, PG 13.5, Number of cable entries: 4 pieces, Bore diameter: 4 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 311473

Multiple sealing insert SKINTOP® DIX 16140, multiple sealing insert, PG 16, number of cable entries: 1pc., bore diameter: 4mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 695075

Multiple sealing insert SKINTOP® DIX 16240, Multiple sealing insert, PG 16, Number of cable entries: 2 pieces, Bore diameter: 4 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 1232468

Multiple sealing insert SKINTOP® DIX 16260, multiple sealing insert, PG 16, number of cable entries: 2 pieces, bore diameter: 6 mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 346666

Multiple sealing insert SKINTOP® DIX 16340, multiple sealing insert, PG 16, number of cable entries: 3, bore diameter: 4mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 936689

Multiple sealing insert SKINTOP® DIX 16350, multiple sealing insert, PG 16, number of cable entries: 3, bore diameter: 5mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 228423

Multiple sealing insert SKINTOP® DIX 16356, Multiple sealing insert, PG 16, Number of cable entries: 3pcs., Bore diameter: 5.6mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 997198

Multiple sealing insert SKINTOP® DIX 16360, Multiple sealing insert, PG 16, Number of cable entries: 3pcs., Bore diameter: 6mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 681612

Multiple sealing insert SKINTOP® DIX 16440, Multiple sealing insert, PG 16, Number of cable entries: 4pcs., Bore diameter: 4mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 786281

Multiple sealing insert SKINTOP® DIX 16450, multiple sealing insert, PG 16, number of cable entries: 4, bore diameter: 5mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 430884

Multiple sealing insert SKINTOP® DIX 16540, multiple sealing insert, PG 16, number of cable entries: 5 pieces, bore diameter: 4 mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 574238

Multiple sealing insert SKINTOP® DIX 21270, Multiple sealing insert, PG 21, Number of cable entries: 2 pieces, Bore diameter: 7 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 438757

Multiple sealing insert SKINTOP® DIX 21280, Multiple sealing insert, PG 21, Number of cable entries: 2 pieces, Bore diameter: 8 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 311496

Multiple sealing insert SKINTOP® DIX 21370, Multiple sealing insert, PG 21, Number of cable entries: 3pcs., Bore diameter: 7mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 651929

Multiple sealing insert SKINTOP® DIX 21380, Multiple sealing insert, PG 21, Number of cable entries: 3pcs., Bore diameter: 8mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 1232711

Multiple sealing insert SKINTOP® DIX 21460, Multiple sealing insert, PG 21, Number of cable entries: 4pcs., Bore diameter: 6mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 431000

Multiple sealing insert SKINTOP® DIX 21550, Multiple sealing insert, PG 21, Number of cable entries: 5pcs., Bore diameter: 5mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 430889

Multiple sealing insert SKINTOP® DIX 21640, multiple sealing insert, PG 21, number of cable entries: 6 pieces, bore diameter: 4 mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefits: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 420513

Multiple sealing insert SKINTOP® DIX 29290, Multiple sealing insert, PG 29, Number of cable entries: 2 pieces, Bore diameter: 9 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 430890

Multiple sealing insert SKINTOP® DIX 29390, Multiple sealing insert, PG 29, Number of cable entries: 3pcs., Bore diameter: 9mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 430891

Multiple sealing insert SKINTOP® DIX 29490, Multiple sealing insert, PG 29, Number of cable entries: 4pcs., Bore diameter: 9mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 431008

Sealing ring SKINDICHT® JT ÖLFLON M12, sealing ring, M 12, inner diameter: 12.1mm, outer diameter: 16.6mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Lieske Part No.: 1231197

Sealing ring SKINDICHT® JT ÖLFLON M25, sealing ring, M 25, inner diameter: 25.1mm, outer diameter: 33.4mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 50 pieces
Lieske Part No.: 1231196

Sealing ring SKINDICHT® JT ÖLFLON PG 13.5, sealing ring, PG 13.5, inner diameter: 20.4mm, outer diameter: 25mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 100 pieces
Lieske Part No.: 440133

Sealing ring SKINDICHT® JT ÖLFLON M50, sealing ring, M 50, inner diameter: 50.2mm, outer diameter: 61.6mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 25 pieces
Lieske Part No.: 1231195

Sealing ring SKINDICHT® JT ÖLFLON M63, sealing ring, M 63, inner diameter: 63.2mm, outer diameter: 73.9mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 25 pieces
Lieske Part No.: 1231194

Cable gland SKINTOP® INOX M12X1.5, cable gland, M 12, clamping range (min./max.): 4 - 7 mm, wrench size 1: 16, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in blue Color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1128806

Quantity: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 998834

Blind plug SKINDICHT® BL PG 11 +O-RING, Blind plug, Thread size: PG 11, Nickel-plated brass, Halogen-free, UV-resistant, Areas of application: Electric motor construction, Mechanical and equipment construction, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 439412

Blind plug SKINDICHT® BL PG 9 +O-RING, Blind plug, Thread size: PG 9, Nickel-plated brass, Halogen-free, UV-resistant, Areas of application: Electric motor construction, Mechanical and equipment construction, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 391400

Blind plug SKINDICHT® BL PG 7 +O-RING, blind plug, thread size: PG 7, nickel-plated brass, halogen-free, UV-resistant, , Application areas: electric motor construction, mechanical and equipment construction, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 440156

Blind plug SKINDICHT® BL PG 29 +O-RING, Blind plug, Thread size: PG 29, Nickel-plated brass, Halogen-free, UV-resistant, Areas of application: Electric motor construction, Mechanical and equipment construction, Benefits: For closing prefabricated threaded holes
Sales unit: 50 pieces
Lieske Part No.: 439373

Blind plug SKINDICHT® BL PG 13.5 +O-RING, Blind plug, Thread size: PG 13.5, Nickel-plated brass, Halogen-free, UV-resistant, Areas of application: Electric motor construction, Mechanical and equipment construction, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 439421

Blind plug SKINDICHT® BL PG 16 +O-RING, Blind plug, Thread size: PG 16, Nickel-plated brass, Halogen-free, UV-resistant, Areas of application: Electric motor construction, Mechanical and equipment construction, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 439359