Multiple sealing insert SKINTOP® DIX-M 50870, Multiple sealing insert, M 50, Number of cable entries: 8, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 10 pieces
Lieske Part No.: 440705

Sealing insert SKINTOP® DIX ASI PG 11, Sealing insert, PG 11, Number of cable entries: 1pc., black, Areas of application: To be used instead of the standard sealing insert in the SKINTOP® cable gland, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil-resistant material, Benefits: Special design with precisely fitting pre-drilled holes for easy insertion of an AS-I bus cable
, High functional reliability thanks to optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 440609

Multiple sealing insert SKINTOP® DIX-M 25 ASI BUS DUO, Multiple sealing insert, M 25, Number of cable entries: 2 pieces, black, Areas of application: To be used instead of the standard sealing insert in the SKINTOP® cable gland, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil-resistant material, Benefits: Protection class IP 68 can be achieved if the holes are optimally occupied, High functional reliability thanks to optimal strain relief
Sales unit: 100 pieces
Lieske Part No.: 461859

Sealing insert SKINTOP® DV PG 11, Sealing insert, PG 11, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 250 pieces
Lieske Part No.: 439720

Sealing insert SKINTOP® DV PG 13.5, Sealing insert, PG 13.5, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 250 pieces
Lieske Part No.: 439722

Sealing insert SKINTOP® DV PG 7, Sealing insert, PG 7, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 500 pieces
Lieske Part No.: 440707

Sealing insert SKINTOP® DV PG 9, Sealing insert, PG 9, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 500 pieces
Lieske Part No.: 439704

Sealing insert SKINTOP® DV PG 16, Sealing insert, PG 16, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 250 pieces
Lieske Part No.: 439723

Sealing insert SKINTOP® DV PG 21, Sealing insert, PG 21, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 100 pieces
Lieske Part No.: 439724

Sealing ring SKINDICHT® JT ÖLFLON M16, sealing ring, M 16, inner diameter: 16.1mm, outer diameter: 21.1mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 100 pieces
Lieske Part No.: 440142

Sealing ring SKINDICHT® JT ÖLFLON M20, sealing ring, M 20, inner diameter: 20.1mm, outer diameter: 27.5mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 100 pieces
Lieske Part No.: 440148

Sealing ring SKINDICHT® JT ÖLFLON M32, sealing ring, M 32, inner diameter: 32.1mm, outer diameter: 40.3mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 50 pieces
Lieske Part No.: 440150

Sealing ring SKINDICHT® JT ÖLFLON M40, sealing ring, M 40, inner diameter: 40.2mm, outer diameter: 51.5mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 25 pieces
Lieske Part No.: 440154

Cable gland SKINTOP® INOX SC M 12, cable gland, M 12, clamping range (min./max.): 4 - 7 mm, wrench size 1: 16, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a variety of chemical substances is required, for use in offshore applications with seawater contact, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty seawater and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1587792

Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 123100

Cable gland SKINTOP® INOX SC M 20, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a variety of chemical substances is required, for use in offshore applications with contact with sea water, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for the EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty sea water and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1336574

Cable gland SKINTOP® INOX SC M 25, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a variety of chemical substances is required, for use in offshore applications with contact with sea water, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for the EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty sea water and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1336573

Cable gland SKINTOP® INOX SC M 32, cable gland, M 32, clamping range (min./max.): 11 - 21 mm, wrench size 1: 36, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a wide range of chemical substances is required, for use in offshore applications with contact with sea water, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for the EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty sea water and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1336572

Cable gland SKINTOP® INOX M16X1.5, cable gland, M 16, clamping range (min./max.): 6 - 10 mm, wrench size 1: 20, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 299730

Cable gland SKINTOP® INOX M20X1.5, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Lieske Part No.: 299731

Cable gland SKINTOP® INOX M25X1.5, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in blue Color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 299777

Cable gland SKINTOP® INOX M32X1.5, Cable gland, M 32, Clamping range (min./max.): 11 - 21 mm, Wrench size 1: 36, Halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 299807

Cable gland SKINTOP® INOX M40X1.5, cable gland, M 40, clamping range (min./max.): 19 - 28 mm, wrench size 1: 45, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1348054

Cable gland SKINTOP® INOX M50X1.5, cable gland, M 50, clamping range (min./max.): 27 - 35 mm, wrench size 1: 54, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1348055

Cable gland SKINTOP® INOX-R M16X1.5, Cable gland, M 16, Clamping range (min./max.): 5 - 7 mm, Wrench size 1: 20, Halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 299732

Cable gland SKINTOP® INOX-R M20X1.5, cable gland, M 20, clamping range (min./max.): 6 - 10 mm, wrench size 1: 24, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in blue color to easily distinguish the cable gland from food, certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), tested resistance to ECOLAB® disinfectants and cleaning agents, with smooth surfaces and fewer corners and edges for an easy cleaning process, best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 299737

Cable gland SKINTOP® INOX-R M25X1.5, Cable gland, M 25, Clamping range (min./max.): 7 - 13 mm, Wrench size 1: 29, Halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 361089

Cable gland SKINTOP® INOX-R M32X1.5, Cable gland, M 32, Clamping range (min./max.): 8 - 15 mm, Wrench size 1: 36, Halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in Blue color for easy differentiation of the cable gland from food, Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), Tested resistance to ECOLAB® disinfectants and cleaning agents, With smooth surfaces and fewer corners and edges for an easy cleaning process, Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 467785

Cable gland SKINTOP® INOX-R M40X1.5, cable gland, M 40, clamping range (min./max.): 15 - 23 mm, wrench size 1: 45, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, Variant 'INOX-R' with reducing sealing insert for sealing cables with a smaller diameter, For use in offshore applications with seawater contact, Withstands high mechanical loads, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in blue color to easily distinguish the cable gland from food, certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), tested resistance to ECOLAB® disinfectants and cleaning agents, with smooth surfaces and fewer corners and edges for an easy cleaning process, best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1348057

Cable gland with bend protection SKINTOP® BS-M METAL M16X1.5, Cable gland with bend protection, M 16, Clamping range (min./max.): 4.5 - 10 mm, Wrench size 1: 20, Nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, Areas of application: Typical areas of application - Steel and glass works - Cement and ceramic works - Foundries - Shipbuilding - Furnace construction, In areas with high demands on special mechanical stability, Mechanical and equipment construction, Construction sites, Portable equipment, Benefits: High mechanical load capacity, Long service life, Optimum strain relief, High functional reliability, Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 1339559

Cable gland with bend protection SKINTOP® BS-M METAL M20X1.5, Cable gland with bend protection, M 20, Clamping range (min./max.): 7 - 13 mm, Wrench size 1: 24, Nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, Areas of application: Typical areas of application - Steel and glass works - Cement and ceramic works - Foundries - Shipbuilding - Furnace construction, In areas with high demands on special mechanical stability, Mechanical and equipment engineering, Construction sites, Portable equipment, Benefits: High mechanical load capacity, Long service life, Optimum strain relief, High functional reliability, Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 1135187

Cable gland with bend protection SKINTOP® BS-M METAL M25X1.5, Cable gland with bend protection, M 25, Clamping range (min./max.): 9 - 17 mm, Wrench size 1: 29, Nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, Areas of application: Typical areas of application - Steel and glass works - Cement and ceramic works - Foundries - Shipbuilding - Furnace construction, In areas with high demands on special mechanical stability, Mechanical and equipment engineering, Construction sites, Portable equipment, Benefits: High mechanical load capacity, Long service life, Optimum strain relief, High functional reliability, Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 1135173

Cable gland with bend protection SKINTOP® BSR-M METAL M20X1.5, Cable gland with bend protection, M 20, Clamping range (min./max.): 5 - 10 mm, Wrench size 1: 24, Nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, Areas of application: Typical areas of application - Steel and glass works - Cement and ceramic works - Foundries - Shipbuilding - Furnace construction, In areas with high demands on special mechanical stability, Mechanical and equipment engineering, Construction sites, Portable equipment, Benefits: High mechanical load capacity, Long service life, Optimum strain relief, High functional reliability, Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 1001704

Cable gland SKINTOP® INOX NPT 1/2, cable gland, NPT 1/2', clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, halogen-free, UV-resistant, IP 69, IP 68 - 5 bar (30 min), , Areas of application: For sealing and strain-relieving cable entry into a housing, Where excellent resistance to a variety of chemical substances is required, For use in offshore applications with seawater contact, Withstands high mechanical loads, Variant 'INOX-R NPT' with reducing sealing insert for sealing cables with a smaller diameter, Also suitable for use in the food industry, where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), Benefits: More compact design compared to other cable glands, Corrosion-resistant in salty seawater and to many chemical substances, Sealing material in blue color to easily distinguish the cable gland from food, certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact), tested resistance to ECOLAB® disinfectants and cleaning agents, with smooth surfaces and fewer corners and edges for an easy cleaning process, best possible sealing enables protection class IP 68 (5 bar)
Sales unit: 5 pieces
Lieske Part No.: 1348056

Adapter SKINDICHT® MA-M/NPT 25X1.5/ 3/10,2 cm ( 4 inch ), adapter, internal thread: NPT 3/4', external thread: M 25, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to an NPT internal thread, available for thread sizes up to NPT1' or up to M40
Sales unit: 25 pieces
Lieske Part No.: 440226

Adapter SKINDICHT® MA-M/NPT 32X1.5/ 1/5,1 cm ( 2 inch ), adapter, internal thread: NPT 1/2', external thread: M 32, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain any lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to an NPT internal thread, available for thread sizes up to NPT1' or up to M40
Sales unit: 25 pieces
Lieske Part No.: 439323

Adapter SKINDICHT® MA-M/NPT 32X1.5/ 2,5 cm ( 1 inch ), adapter, internal thread: NPT 1', external thread: M 32, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to an NPT internal thread, available for thread sizes up to NPT1' or up to M40
Sales unit: 25 pieces
Lieske Part No.: 438917

Add-on SKINTOP® BRUSH ADD-ON M12, Add-on, M 12, Wrench size 1: 24, Nickel-plated brass, EMC shielding, Areas of application: For EMC contacting with through holes, Conveyor and transport systems, Switch cabinet construction, For EMC-compliant grounding of the copper shield braid, Automation systems, Benefits: Uncomplicated and safe, Easy disassembly¿, Optimum, low-resistance 360° shield contact, Cutting edges cut through the insulating layer of the housing or switch cabinet when tightening and thus ensure optimal contact, Visible, large-area shield contact
Sales unit: 25 pieces
Lieske Part No.: 467783

Add-on SKINTOP® BRUSH ADD-ON M63, Add-on, M 63, Wrench size 1: 63, Nickel-plated brass, EMC shielding, Areas of application: For EMC contacting with through holes, Conveyor and transport systems, Switch cabinet construction, For EMC-compliant grounding of the copper shield braid, Automation systems, Benefits: Uncomplicated and safe, Easy disassembly¿, Optimum, low-resistance 360° shield contact, Cutting edges cut through the insulating layer of the housing or switch cabinet when tightening and thus ensure optimal contact, Visible, large-area shield contact
Lieske Part No.: 1135172

Sealing insert SKINTOP® DV-M 12, sealing insert, M 12, black, areas of application: assembly preparation, protection of unused connection points, these seals are inserted into the sealing ring of the SKINTOP® cable glands, benefit: prevents moisture from penetrating the housing interior
Lieske Part No.: 712683

Sealing insert SKINTOP® DV-M 16, sealing insert, M 16, black, areas of application: assembly preparation, protection of unused connection points, these seals are inserted into the sealing ring of the SKINTOP® cable glands, benefit: prevents moisture from penetrating the housing interior
Lieske Part No.: 689688

Sealing insert SKINTOP® SDV-M 16 ATEX, sealing insert, M 16, black, areas of application: Equipment group II / category 2G+1D, SKINTOP® SDV-M for use in conjunction with SKINTOP® MS-M ATEX, MS-M ATEX BRUSH or SKINTOP® KM ATEX plus (blue), benefits: high protection class, permanent and secure sealing in potentially explosive areas, easy to assemble
Sales unit: 50 pieces
Lieske Part No.: 443056

Sealing insert SKINTOP® SDVR-M 16 ATEX, sealing insert, M 16, black, areas of application: Equipment group II / category 2G+1D, SKINTOP® SDV-M for use in conjunction with SKINTOP® MS-M ATEX, MS-M ATEX BRUSH or SKINTOP® KM ATEX plus (blue), benefits: high protection class, permanent and secure sealing in potentially explosive areas, easy to assemble
Sales unit: 50 pieces
Lieske Part No.: 443062

Sealing insert SKINTOP® DV-M 20, sealing insert, M 20, black, areas of application: assembly preparation, protection of unused connection points, these seals are inserted into the sealing ring of the SKINTOP® cable glands, benefit: prevents moisture from penetrating the housing interior
Lieske Part No.: 515205

Sealing insert SKINTOP® SDV-M 20 ATEX, sealing insert, M 20, black, areas of application: Equipment group II / category 2G+1D, SKINTOP® SDV-M for use in conjunction with SKINTOP® MS-M ATEX, MS-M ATEX BRUSH or SKINTOP® KM ATEX plus (blue), benefits: high protection class, permanent and secure sealing in potentially explosive areas, easy to assemble
Sales unit: 50 pieces
Lieske Part No.: 731722

Sealing insert SKINTOP® SDVR-M 20 ATEX, sealing insert, M 20, black, areas of application: Equipment group II / category 2G+1D, SKINTOP® SDV-M for use in conjunction with SKINTOP® MS-M ATEX, MS-M ATEX BRUSH or SKINTOP® KM ATEX plus (blue), benefits: high protection class, permanent and secure sealing in potentially explosive areas, easy to assemble
Sales unit: 50 pieces
Lieske Part No.: 443073

Sealing insert SKINTOP® DV-M 25, sealing insert, M 25, black, areas of application: assembly preparation, protection of unused connection points, these seals are inserted into the sealing ring of the SKINTOP® cable glands, benefit: prevents moisture from penetrating the housing interior
Lieske Part No.: 456562

Sealing insert SKINTOP® SDV-M 25 ATEX, sealing insert, M 25, black, areas of application: Equipment group II / category 2G+1D, SKINTOP® SDV-M for use in conjunction with SKINTOP® MS-M ATEX, MS-M ATEX BRUSH or SKINTOP® KM ATEX plus (blue), benefits: high protection class, permanent and secure sealing in potentially explosive areas, easy to assemble
Sales unit: 50 pieces
Lieske Part No.: 443074

Sealing insert SKINTOP® DV-M 32, sealing insert, M 32, black, areas of application: assembly preparation, protection of unused connection points, these seals are inserted into the sealing ring of the SKINTOP® cable glands, benefit: prevents moisture from penetrating the housing interior
Lieske Part No.: 439725

Sealing insert SKINTOP® SDVR-M 32 ATEX, sealing insert, M 32, black, areas of application: Equipment group II / category 2G+1D, SKINTOP® SDV-M for use in conjunction with SKINTOP® MS-M ATEX, MS-M ATEX BRUSH or SKINTOP® KM ATEX plus (blue), benefits: high protection class, permanent and secure sealing in potentially explosive areas, easy to assemble
Sales unit: 25 pieces
Lieske Part No.: 442711