Cable gland SKINDICHT® SHZ PG 7, cable gland, PG 7, clamping range (min./max.): 5 - 5 mm, wrench size 1: 14, nickel-plated brass, halogen-free, UV-resistant, IP 55, , Areas of application: Brass compact screw connection for stable strain relief, solid, for large cable cross-sections, Benefits: For cables and lines with a large outer diameter, Robust, High strain relief, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 439534

Cable gland SKINDICHT® SHZ PG 42, cable gland, PG 42, clamping range (min./max.): 30 - 42.5 mm, wrench size 1: 57, nickel-plated brass, halogen-free, UV-resistant, IP 55, , Areas of application: Brass compact screw connection for stable strain relief, solid, for large cable cross-sections, Benefits: For cables and lines with a large outer diameter, Robust, High strain relief, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 5 pieces
Lieske Part No.: 1231213

Flat cable gland SKINDICHT® SVFK PG 21, Flat cable gland, PG 21, Flat cable width (min./max.) 10.0 - 20.5 mm, Flat cable height (min./max.) 3.0 - 8.0 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 439908

Flat cable gland SKINDICHT® SVFK PG 29, Flat cable gland, PG 29, Flat cable width (min./max.) 15.0 - 27.0 mm, Flat cable height (min./max.) 4.0 - 11.5 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 439919

Flat cable gland SKINDICHT® SVFK PG 36, Flat cable gland, PG 36, Flat cable width (min./max.) 25.0 - 34.0 mm, Flat cable height (min./max.) 4.0 - 11.5 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 523885

Sealing ring SKINDICHT® O-RING PG 13.5 (18X1.5) NBR, sealing ring, PG 13.5, inner diameter: 18mm, outer diameter: 21mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 440254

Incision sealing ring SKINDICHT® E PG 9 INCISED SEAL, incision sealing ring, PG 9, inner diameter: 5.0mm8.0mm, chloroprene rubber, black, areas of application: incision sealing ring for SKINDICHT® cable glands, benefits: easy breaking out of the various incisions, one seal for different clamping areas
Sales unit: 250 pieces
Lieske Part No.: 438912

Blind plug SKINDICHT® BLK PG 11 RAL 7035 LGY, Blind plug, Thread size: PG 11, Polystyrene, Halogen-free, UV-resistant, , Areas of application: Distribution box, Switch cabinet construction, Junction boxes, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 788080

Locknut SKINDICHT® SM/SVRX 24X1.5, locknut, M 24, wrench size: 30mm, nickel-plated brass, areas of application: offshore, shipbuilding, high-performance engines, cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 439625

Cable gland SKINDICHT® SVRX 2414-Z, cable gland, M 24, clamping range (min./max.): 12 - 14.5 mm, halogen-free, UV-resistant, IP 56, EMC shielding, areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440543

Cable gland SKINDICHT® SVRX 2416-Z, cable gland, M 24, clamping range (min./max.): 14 - 16.5 mm, halogen-free, UV-resistant, IP 56, EMC shielding, areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440544

Cable gland SKINDICHT® SVRX 5641-W, cable gland, M 56, clamping range (min./max.): 38 - 41.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 1230626

Cable gland SKINDICHT® SVRX 7244-W, cable gland, M 72, clamping range (min./max.): 41 - 44.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440549

Locknut SKINDICHT® SM/SVRX 72X2, locknut, M 72, wrench size: 85mm, nickel-plated brass, areas of application: offshore, shipbuilding, high-performance engines, cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 892198

Cable gland SKINDICHT® SVRX 7248-W, cable gland, M 72, clamping range (min./max.): 44 - 48.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 1230625

Cable gland SKINDICHT® SVRX 7252-W, cable gland, M 72, clamping range (min./max.): 48 - 52.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440550

Cable gland SKINDICHT® SVRX 7256-W, cable gland, M 72, clamping range (min./max.): 52 - 56.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 932489

Cable gland SKINDICHT® SVRX 8066-W, cable gland, M 80, clamping range (min./max.): 62 - 66 mm, halogen-free, UV-resistant, IP 56, , Application areas: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 1230624

Cable gland SKINDICHT® SVRX 8059-W, cable gland, M 80, clamping range (min./max.): 56 - 59 mm, halogen-free, UV-resistant, IP 56, , Application areas: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440552

Reduction SKINDICHT® MR-M 72X2/63X1.5, reduction, internal thread: M 63, external thread: M 72, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 460002

Reduction SKINDICHT® MR-M 80X2 / M 75X1.5 MS BLANK, reduction, internal thread: M 75, external thread: M 80, nickel-plated brass, , Areas of application: For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Withstands high chemical and mechanical stress, Benefits: Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing, Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties 'Lead-free' articles do not contain any lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive
Lieske Part No.: 460003

Flat cable entry SKINDICHT® FL1, flat cable entry, flat cable width (min./max.) 0.0 - 70.0 mm, flat cable height (min./max.) 0.0 - 15.0 mm, uncoated aluminum, halogen-free, UV-resistant, IP 65, areas of application: conveyors, universally applicable cable flange, mainly for large flat cables, energy chain, crane and conveyor system construction, elevator construction, benefits: the sealing inserts are pressed onto the cable via the conical inner contour in the upper part of the housing, sealing profiles allow many individual problem solutions, several flat and round cables can be inserted at the same time
Lieske Part No.: 1312270

Flat cable entry SKINDICHT® FL4, flat cable entry, flat cable width (min./max.) 0.0 - 63.0 mm, flat cable height (min./max.) 0.0 - 12.0 mm, uncoated aluminum, halogen-free, UV-resistant, IP 65, areas of application: conveyors, universally applicable cable flange, mainly for large flat cables, energy chain, crane and conveyor system construction, elevator construction, benefits: the sealing inserts are pressed onto the cable via the conical inner contour in the upper part of the housing, sealing profiles allow many individual problem solutions, several flat and round cables can be inserted at the same time
Lieske Part No.: 1231200

Flat cable entry SKINDICHT® FL5, flat cable entry, flat cable width (min./max.) 0.0 - 70.0 mm, flat cable height (min./max.) 0.0 - 15.0 mm, uncoated aluminum, halogen-free, UV-resistant, IP 65, areas of application: conveyors, universally applicable cable flange, mainly for large flat cables, energy chain, crane and conveyor system construction, elevator construction, benefits: the sealing inserts are pressed onto the cable via the conical inner contour in the upper part of the housing, sealing profiles allow many individual problem solutions, several flat and round cables can be inserted at the same time
Lieske Part No.: 438914

Cable gland SKINDICHT® SHVE PG 13.5/9/11/7, cable gland, PG 13.5, clamping range (min./max.): 8.5 - 10.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 440482

Cable gland SKINDICHT® SHVE PG 16/11/11/8, cable gland, PG 16, clamping range (min./max.): 8.5 - 10.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 440488

Cable gland SKINDICHT® SHVE PG 16/11/13/9, cable gland, PG 16, clamping range (min./max.): 10.8 - 12.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439488

Cable gland SKINDICHT® SHVE PG 21/16/16/12, cable gland, PG 21, clamping range (min./max.): 14 - 15.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439491

Cable gland SKINDICHT® SHV PG 13.5/9/11, cable gland, PG 21, clamping range (min./max.): 8.5 - 10.8 mm, wrench size 1: 22.0, nickel-plated brass, UV-resistant, IP 68 - 10 bar, , Areas of application: Float switch, Pressure-water-tight cable gland with conical sealing element, Pumps, Benefits: Pressure-water-tight, Robust, Gentle clamping of the cable, High strain relief
Sales unit: 25 pieces
Lieske Part No.: 1232175

Cable gland SKINDICHT® SHV PG 21/16/20, cable gland, PG 21, clamping range (min./max.): 17.5 - 19.8 mm, wrench size 1: 30.0, nickel-plated brass, UV-resistant, IP 68 - 10 bar, , Areas of application: Float switch, Pressure-water-tight cable gland with conical sealing element, Pumps, Benefits: Pressure-water-tight, Robust, Gentle clamping of the cable, High strain relief
Sales unit: 25 pieces
Lieske Part No.: 1232173

Cable gland SKINTOP® MS PG 7, cable gland, PG 7, clamping range (min./max.): 2 - 6.5 mm, wrench size 1: 14, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 100 pieces
Lieske Part No.: 784297

Cable gland SKINTOP® MS PG 9, cable gland, PG 9, clamping range (min./max.): 4 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Lieske Part No.: 918016

Cable gland SKINTOP® MS PG 11, cable gland, PG 11, clamping range (min./max.): 4 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Lieske Part No.: 369037

Cable gland SKINTOP® MS PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 5 - 12 mm, wrench size 1: 22, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 50 pieces
Lieske Part No.: 949493

Cable gland SKINTOP® MS PG 16, cable gland, PG 16, clamping range (min./max.): 8 - 14 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 50 pieces
Lieske Part No.: 723706

Cable gland SKINTOP® MS PG 21, cable gland, PG 21, clamping range (min./max.): 11 - 18 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 25 pieces
Lieske Part No.: 305665

Cable gland SKINTOP® MS PG 29, cable gland, PG 29, clamping range (min./max.): 16 - 25 mm, wrench size 1: 40, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 25 pieces
Lieske Part No.: 345126

Cable gland SKINTOP® MS PG 36, cable gland, PG 36, clamping range (min./max.): 19 - 32 mm, wrench size 1: 50, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 10 pieces
Lieske Part No.: 861974

Cable gland SKINTOP® MS PG 42, cable gland, PG 42, clamping range (min./max.): 28 - 38 mm, wrench size 1: 57, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 5 pieces
Lieske Part No.: 337335

Cable gland SKINTOP® MS PG 48, cable gland, PG 48, clamping range (min./max.): 34 - 44 mm, wrench size 1: 64, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 5 pieces
Lieske Part No.: 172299

Cable gland SKINTOP® MSR PG 7, cable gland, PG 7, clamping range (min./max.): 2 - 5 mm, wrench size 1: 14, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 100 pieces
Lieske Part No.: 430955

Cable gland SKINTOP® MSR PG 9, cable gland, PG 9, clamping range (min./max.): 2 - 6 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 100 pieces
Lieske Part No.: 122668

Cable gland SKINTOP® MSR PG 11, cable gland, PG 11, clamping range (min./max.): 3 - 7 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 50 pieces
Lieske Part No.: 153803

Cable gland SKINTOP® MSR PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 4 - 9 mm, wrench size 1: 22, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 50 pieces
Lieske Part No.: 469375

Cable gland SKINTOP® MSR PG 16, cable gland, PG 16, clamping range (min./max.): 6 - 13 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 50 pieces
Lieske Part No.: 760955

Cable gland SKINTOP® MSR PG 21, cable gland, PG 21, clamping range (min./max.): 8 - 16 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Withstands high chemical and mechanical stress,For sealing and strain-relieving cable entry into a housing,Suitable for outdoor use, taking the temperature range into account, Benefits: Large, variable clamping range for different cable outer diameters,Optimal strain relief thanks to flexible slats,Extensive range of accessories available,Convincing product for a wide range of applications thanks to its versatile properties,Best possible sealing enables protection class IP 68 (10 bar)
Sales unit: 25 pieces
Lieske Part No.: 742672

Cable gland SKINDICHT® SVRN PG 7007, cable gland, PG 7, clamping range (min./max.): 7 - 7 mm, wrench size 1: 13, nickel-plated brass, UV-resistant, IP 54, , Areas of application: Cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, Benefits: High mechanical load capacity, optimal strain relief
Sales unit: 100 pieces
Lieske Part No.: 1583520

Cable gland SKINDICHT® SVRN PG 9008, cable gland, PG 9, clamping range (min./max.): 8 - 8 mm, wrench size 1: 15, nickel-plated brass, UV-resistant, IP 54, , Areas of application: Cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, Benefits: High mechanical load capacity, optimal strain relief
Sales unit: 100 pieces
Lieske Part No.: 1230628

Sealing insert SKINDICHT® STK PG 7, sealing insert, polyvinyl chloride, white, areas of application: The dust protection is placed under the cap nut of the cable gland, benefits: Prevents dust and dirt from entering the housing interior
Sales unit: 500 pieces
Lieske Part No.: 439866

Sealing insert SKINDICHT® STK PG 9, sealing insert, polyvinyl chloride, white, areas of application: The dust protection is placed under the cap nut of the cable gland, benefits: Prevents dust and dirt from entering the housing interior
Sales unit: 500 pieces
Lieske Part No.: 439867