Cable gland SKINTOP® GRIP M16X1.5, cable gland, M 16, clamping range (min./max.): 4.5 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: The 'XL' variant is particularly suitable for thick-walled housings thanks to its particularly long connection thread. Can be used in dry, damp and especially in harsh environments. Especially for use on mobile equipment where a high level of strain relief of the clamped cable is required. Withstands high mechanical loads. , Benefits: Large, variable clamping range for different cable outer diameters. Clamping the cable using the double bracket above the cap nut enables much higher strain relief than with conventional cable glands, even under mechanical load. The double bracket ensures reliable bending and kinking protection for the cable, as the cable is enclosed all around. is gently clamped, Gentle clamping of the cable due to high elasticity of the sealing insert material, Best possible sealing by O-ring and sealing ring enables protection class IP 68 (10 bar) and IP 69
Sales unit: 25 pieces
Lieske Part No.: 1139088

Cable gland SKINTOP® GRIP M25X1.5, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, , Areas of application: The 'XL' variant is particularly suitable for thick-walled housings thanks to its particularly long connection thread. Can be used in dry, damp and especially in harsh environments. Especially for use on mobile equipment where a high level of strain relief of the clamped cable is required. Withstands high mechanical loads. , Benefits: Large, variable clamping range for different cable outer diameters. Clamping the cable using the double bracket above the cap nut enables a much higher level of strain relief than with conventional cable glands, even under mechanical load. The double bracket ensures reliable bending and kinking protection for the cable, as the cable is gently clamped all around. is clamped, Gentle clamping of the cable due to high elasticity of the sealing insert material, Best possible sealing by O-ring and sealing ring enables protection class IP 68 (10 bar) and IP 69
Sales unit: 25 pieces
Lieske Part No.: 1597128

Cable gland SKINTOP® SOLAR M12X1.5, cable gland, M 12, clamping range (min./max.): 3.5 - 7 mm, wrench size 1: 15, black, UV-resistant, , Areas of application: photovoltaic systems, Benefits: UV and ozone resistant, Extremely flame retardant according to UL 94V-0 / 94-5VA, Permanent vibration protection, High strain relief, UL 746 C - UL F1 outdoor use
Sales unit: 100 pieces
Lieske Part No.: 905610

Cable gland SKINTOP® SOLAR PLUS M12 W. O-RING, cable gland, M 12, clamping range (min./max.): 3.5 - 7 mm, wrench size 1: 15, black, UV-resistant, , Areas of application: photovoltaic systems, Benefits: UV and ozone resistant, Extremely flame retardant according to UL 94V-0 / 94-5VA, Permanent vibration protection, High strain relief, UL 746 C - UL F1 outdoor use
Sales unit: 100 pieces
Lieske Part No.: 1332428

Cable gland SKINTOP® COLD M 12X1.5, cable gland, M 12, clamping range (min./max.): 3.5 - 7 mm, wrench size 1: 16, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Frozen goods systems, cold stores, In areas with high demands on special mechanical stability and cold resistance, Plant engineering, Off-shore area, Air conditioning technology, Benefits: High mechanical load capacity, Optimum strain relief, Cold impact resistance, Increased cold resistance, Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 461850

Locknut SKINTOP® GMP-HF-M 16X1.5 RAL7035 LGY, locknut, M 16, wrench size: 22mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 443017

Locknut SKINTOP® GMP-HF-M 20X1.5 RAL7035 LGY, locknut, M 20, wrench size: 27mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 443020

Locknut SKINTOP® GMP-HF-M 25X1.5 RAL7035 LGY, locknut, M 25, wrench size: 34mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 443021

Locknut SKINTOP® GMP-HF-M 32X1.5 RAL7035 LGY, locknut, M 32, wrench size: 41mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no drop formation
Sales unit: 100 pieces
Lieske Part No.: 443027

Locknut SKINTOP® GMP-HF-M 40X1.5 RAL7035 LGY, locknut, M 40, wrench size: 50mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 25 pieces
Lieske Part No.: 443043

Locknut SKINTOP® GMP-HF-M 50X1.5 RAL7035 LGY, locknut, M 50, wrench size: 60mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 25 pieces
Lieske Part No.: 443046

Multiple sealing insert SKINTOP® DIX-M 16220, Multiple sealing insert, M 16, Number of cable entries: 2 pieces, Bore diameter: 2 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 440611

Multiple sealing insert SKINTOP® DIX-M 16420, Multiple sealing insert, M 16, Number of cable entries: 4, Bore diameter: 2mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 467782

Multiple sealing insert SKINTOP® DIX-M 20353, Multiple sealing insert, M 20, Number of cable entries: 3, Bore diameter: 5.3mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Lieske Part No.: 749569

Multiple sealing insert SKINTOP® DIX-M 20430, Multiple sealing insert, M 20, Number of cable entries: 4, Bore diameter: 3mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 740163

Multiple sealing insert SKINTOP® DIX-M 20920, Multiple sealing insert, M 20, Number of cable entries: 9, Bore diameter: 2mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 440613

Multiple sealing insert SKINTOP® DIX-M 25640, Multiple sealing insert, M 25, Number of cable entries: 6, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 880375

Multiple sealing insert SKINTOP® DIX-M 32270, Multiple sealing insert, M 32, Number of cable entries: 2 pieces, Bore diameter: 7 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 440614

Multiple sealing insert SKINTOP® DIX-M 32290, Multiple sealing insert, M 32, Number of cable entries: 2 pieces, Bore diameter: 9 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 440616

Multiple sealing insert SKINTOP® DIX-M 32560, Multiple sealing insert, M 32, Number of cable entries: 5, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 811245

Multiple sealing insert SKINTOP® DIX-M 32850, Multiple sealing insert, M 32, Number of cable entries: 8, Bore diameter: 5mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 901628

Multiple sealing insert SKINTOP® DIX-M 32940, Multiple sealing insert, M 32, Number of cable entries: 9, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 440689

Multiple sealing insert SKINTOP® DIX-M 40290, Multiple sealing insert, M 40, Number of cable entries: 2 pieces, Bore diameter: 9 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 440692

Multiple sealing insert SKINTOP® DIX-M 40310, Multiple sealing insert, M 40, Number of cable entries: 3, Bore diameter: 10mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 25 pieces
Lieske Part No.: 440697

Multiple sealing insert SKINTOP® DIX-M 40490, Multiple sealing insert, M 40, Number of cable entries: 4, Bore diameter: 9mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 304598

Multiple sealing insert SKINTOP® DIX-M 40580, Multiple sealing insert, M 40, Number of cable entries: 5, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 168994

Multiple sealing insert SKINTOP® DIX-M 40590, Multiple sealing insert, M 40, Number of cable entries: 5, Bore diameter: 9mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 440701

Multiple sealing insert SKINTOP® DIX-M 40670, Multiple sealing insert, M 40, Number of cable entries: 6, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 188853

Multiple sealing insert SKINTOP® DIX-M 40860, Multiple sealing insert, M 40, Number of cable entries: 8, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 350890

Multiple sealing insert SKINTOP® DIX-M 50147, Multiple sealing insert, M 50, Number of cable entries: 14, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 466344

Multiple sealing insert SKINTOP® DIX-M 50166, Multiple sealing insert, M 50, Number of cable entries: 16 pcs., Bore diameter: 6.0 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 440702

Multiple sealing insert SKINTOP® DIX-M 50780, Multiple sealing insert, M 50, Number of cable entries: 7, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 10 pieces
Lieske Part No.: 440703

Multiple sealing insert SKINTOP® DIX-M 50870, Multiple sealing insert, M 50, Number of cable entries: 8, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 10 pieces
Lieske Part No.: 440705

Sealing insert SKINTOP® DIX ASI PG 11, Sealing insert, PG 11, Number of cable entries: 1pc., black, Areas of application: To be used instead of the standard sealing insert in the SKINTOP® cable gland, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil-resistant material, Benefits: Special design with precisely fitting pre-drilled holes for easy insertion of an AS-I bus cable
, High functional reliability thanks to optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 440609

Multiple sealing insert SKINTOP® DIX-M 25 ASI BUS DUO, Multiple sealing insert, M 25, Number of cable entries: 2 pieces, black, Areas of application: To be used instead of the standard sealing insert in the SKINTOP® cable gland, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil-resistant material, Benefits: Protection class IP 68 can be achieved if the holes are optimally occupied, High functional reliability thanks to optimal strain relief
Sales unit: 100 pieces
Lieske Part No.: 461859

Sealing insert SKINTOP® DV PG 11, Sealing insert, PG 11, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 250 pieces
Lieske Part No.: 439720

Sealing insert SKINTOP® DV PG 13.5, Sealing insert, PG 13.5, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 250 pieces
Lieske Part No.: 439722

Sealing insert SKINTOP® DV PG 7, Sealing insert, PG 7, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 500 pieces
Lieske Part No.: 440707

Sealing insert SKINTOP® DV PG 9, Sealing insert, PG 9, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 500 pieces
Lieske Part No.: 439704

Sealing insert SKINTOP® DV PG 16, Sealing insert, PG 16, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 250 pieces
Lieske Part No.: 439723

Sealing insert SKINTOP® DV PG 21, Sealing insert, PG 21, black, Areas of application: Preparation for assembly, Protection of unused connection points, These seals are inserted into the sealing ring of the SKINTOP® cable glands, Benefit: Prevents moisture from penetrating the housing interior
Sales unit: 100 pieces
Lieske Part No.: 439724

Sealing ring SKINDICHT® JT ÖLFLON M16, sealing ring, M 16, inner diameter: 16.1mm, outer diameter: 21.1mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 100 pieces
Lieske Part No.: 440142

Sealing ring SKINDICHT® JT ÖLFLON M20, sealing ring, M 20, inner diameter: 20.1mm, outer diameter: 27.5mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 100 pieces
Lieske Part No.: 440148

Sealing ring SKINDICHT® JT ÖLFLON M32, sealing ring, M 32, inner diameter: 32.1mm, outer diameter: 40.3mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 50 pieces
Lieske Part No.: 440150

Sealing ring SKINDICHT® JT ÖLFLON M40, sealing ring, M 40, inner diameter: 40.2mm, outer diameter: 51.5mm, polytetrafluoroethylene, PTFE, white, areas of application: PTFE sealing discs for SKINTOP® and SKINDICHT® cable glands, benefits: food-safe, resistant to oil, water, alkalis, acids, solvents, etc.
Sales unit: 25 pieces
Lieske Part No.: 440154

Cable gland SKINTOP® INOX SC M 12, cable gland, M 12, clamping range (min./max.): 4 - 7 mm, wrench size 1: 16, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a variety of chemical substances is required, for use in offshore applications with seawater contact, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty seawater and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1587792

Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 123100

Cable gland SKINTOP® INOX SC M 20, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a variety of chemical substances is required, for use in offshore applications with contact with sea water, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for the EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty sea water and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1336574

Cable gland SKINTOP® INOX SC M 25, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a variety of chemical substances is required, for use in offshore applications with contact with sea water, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for the EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty sea water and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1336573

Cable gland SKINTOP® INOX SC M 32, cable gland, M 32, clamping range (min./max.): 11 - 21 mm, wrench size 1: 36, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 69, EMC shielding, areas of application: where excellent resistance to a wide range of chemical substances is required, for use in offshore applications with contact with sea water, withstands high mechanical loads, also suitable for use in the food industry where the product is to be installed in the splash zone or in the indirect production environment of food (product-free zone), for the EMC-compliant introduction of copper-shielded cables, benefits: more compact design compared to other cable glands, corrosion-resistant in salty sea water and against many chemical substances, optimal EMC protection thanks to integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between Copper shielding braid and screw connection,Sealing material in blue color for easy differentiation of the cable gland from food,Certified according to NSF/ANSI 169 for use in hygiene-critical areas in North America (Standard Special Purpose Food Equipment and Devices / for use in Food Zone Non Contact),Tested resistance to ECOLAB® disinfectants and cleaning agents,With smooth surfaces and fewer corners and edges for an easy cleaning process,Best possible sealing enables protection class IP 68 and IP 69
Sales unit: 5 pieces
Lieske Part No.: 1336572