Cable gland SKINTOP® MS-HF-M GRIP M20X1.5, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, nickel-plated brass, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Machines and systems on construction sites, plant engineering, crane and conveyor system construction, double-bracket strain relief cable gland, for harsh operating conditions, portable equipment, Benefits: Reliable bending and kink protection, halogen-free and flame-retardant, for high mechanical loads, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 1597143

Cable gland SKINTOP® MS-HF-M GRIP M32X1.5, cable gland, M 32, clamping range (min./max.): 11 - 21 mm, wrench size 1: 36, nickel-plated brass, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Machines and systems on construction sites, plant engineering, crane and conveyor system construction, double-bracket strain relief cable gland, for harsh operating conditions, portable equipment, Benefits: Reliable bending and kink protection, halogen-free and flame-retardant, for high mechanical loads, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 1052485

Cable gland SKINTOP® MS-HF-M 20X1.5, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, nickel-plated brass, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Can be used in rail vehicles in accordance with standards (testing of fire behavior according to DIN EN 45545-2:2016-02, requirement sets R22 and R23, hazard levels HL1, HL2 and HL3), Withstands high chemical and mechanical stress, For sealing and strain-relieving cable entry into a housing, Subways and trains, Wherever the protection of people and property is a priority, In areas with high demands on special mechanical, chemical stability, Benefits: Large, variable clamping range for various cable outer diameters up to 98 mm, Halogen-free and flame retardant,Halogen-free materials facilitate the use of the product in public areas,Optimal strain relief,High functional reliability,Large, variable clamping ranges,High functional reliability thanks to optimal strain relief
Sales unit: 25 pieces
Lieske Part No.: 1348058

Cable gland SKINTOP® MS-HF-M 25X1.5, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, nickel-plated brass, halogen-free, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Can be used in rail vehicles in accordance with standards (testing of fire behavior according to DIN EN 45545-2:2016-02, requirement sets R22 and R23, hazard levels HL1, HL2 and HL3), Withstands high chemical and mechanical stress, For sealing and strain-relieving cable entry into a housing, Subways and trains, Wherever the protection of people and property is a priority, In areas with high demands on special mechanical, chemical stability, Benefits: Large, variable clamping range for various cable outer diameters up to 98 mm, Halogen-free and flame retardant,Halogen-free materials facilitate the use of the product in public areas,Optimal strain relief,High functional reliability,Large, variable clamping ranges,High functional reliability thanks to optimal strain relief
Sales unit: 25 pieces
Lieske Part No.: 1348059

Cable gland SKINTOP® MS-SC-M 12X1.5, cable gland, M 12, clamping range (min./max.): 3.5 - 7 mm, wrench size 1: 16, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through Integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 330258

Cable gland SKINTOP® MS-SC-M 16X1.5, cable gland, M 16, clamping range (min./max.): 4.5 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through Integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 452746

Cable gland SKINTOP® MS-SC-M 16X1.5, cable gland, M 16, clamping range (min./max.): 4.5 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through Integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Sales unit: 50 pieces
Lieske Part No.: 1893651

Cable gland SKINTOP® MS-SC-M-XL 16X1.5, cable gland, M 16, clamping range (min./max.): 4.5 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through integrated, highly conductive and flexible contact spring, which creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Sales unit: 50 pieces
Lieske Part No.: 935600

Cable gland SKINTOP® MS-SC-M 20X1.5, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through integrated, Highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 263263

Cable gland SKINTOP® MS-SC-M-XL 20X1.5, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through Integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 137417

Cable gland SKINTOP® MS-SC-M 25X1.5, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through integrated, Highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 593954

Cable gland SKINTOP® MS-SC-M-XL 25X1.5, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through Integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 147421

Cable gland SKINTOP® MS-SC M 32X1.5, cable gland, M 32, clamping range (min./max.): 11 - 21 mm, wrench size 1: 36, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through integrated, Highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 410013

Cable gland SKINTOP® MS-SC-M-XL 32X1.5, cable gland, M 32, clamping range (min./max.): 11 - 21 mm, wrench size 1: 36, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection thanks to an integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification in accordance with the technical data enables the product to be used in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Sales unit: 25 pieces
Lieske Part No.: 290885

Cable gland SKINTOP® MS-SC M 40X1.5, cable gland, M 40, clamping range (min./max.): 19 - 28 mm, wrench size 1: 45, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through integrated, Highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 136822

Cable gland SKINTOP® MS-SC-M-XL 40X1.5, cable gland, M 40, clamping range (min./max.): 19 - 28 mm, wrench size 1: 45, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection thanks to an integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification in accordance with the technical data enables the product to be used in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Sales unit: 10 pieces
Lieske Part No.: 439829

Cable gland SKINTOP® MS-SC-M 50X1.5, cable gland, M 50, clamping range (min./max.): 27 - 35 mm, wrench size 1: 65, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection through Integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification according to technical data enables use of the product in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 850097

Cable gland SKINTOP® MS-SC-M-XL 50X1.5, cable gland, M 50, clamping range (min./max.): 27 - 35 mm, wrench size 1: 65, nickel-plated brass, UV-resistant, IP 69, IP 68 - 10 bar (30 min), IP 66, EMC shielding, areas of application: Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, The SKINTOP® MS-SC-M-XL variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Large, variable clamping range for different cable outer diameters, Optimum EMC protection thanks to an integrated, highly conductive and flexible contact spring that creates a low-resistance transition between the copper shielding braid and the screw connection,UL certification in accordance with the technical data enables the product to be used in North America,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Suitable for cables with and without inner sheath,Safe, quick and uncomplicated installation,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Sales unit: 5 pieces
Lieske Part No.: 446203

Lapp SKINTOP® MS-M BRUSH
Faster, easier screen contact; Optimal low-resistance 360 ° screen contact; Faster than any other comparable system; Uncomplicated and reliable; Highest assembly freedom in cable adjustment Application areas

• For EMC compliant earthing of the copper braiding, or for cables with copper shaft sheath
• Automation Systems
• Conveyor systems
• great performance motors
• frequency
Material:
Body: Nickel plated brass EMC brush: brass Seal: special elastomer O-ring: special elastomer
Protection:
IP 68
IP 69 K (M25x1,5 - M63x1,5) Type: MS-M BRUSH 25x1,5 SKINTOP
Sales Unit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 459914

Lapp SKINTOP® MS-M BRUSH
Faster, easier screen contact; Optimal low-resistance 360 ° screen contact; Faster than any other comparable system; Uncomplicated and reliable; Highest assembly freedom in cable adjustment Application areas

• For EMC compliant earthing of the copper braiding, or for cables with copper shaft sheath
• Automation Systems
• Conveyor systems
• great performance motors
• frequency
Material:
Body: Nickel plated brass EMC brush: brass Seal: special elastomer O-ring: special elastomer
Protection:
IP 68
IP 69 K (M25x1,5 - M63x1,5) Type: MS-M BRUSH 32x1,5 SKINTOP
Sales Unit: 1 ST.
Lieske Part No.: 459500

Lapp SKINTOP® MS-M BRUSH
Faster, easier screen contact; Optimal low-resistance 360 ° screen contact; Faster than any other comparable system; Uncomplicated and reliable; Highest assembly freedom in cable adjustment Application areas

• For EMC compliant earthing of the copper braiding, or for cables with copper shaft sheath
• Automation Systems
• Conveyor systems
• great performance motors
• frequency
Material:
Body: Nickel plated brass EMC brush: brass Seal: special elastomer O-ring: special elastomer
Protection:
IP 68
IP 69 K (M25x1,5 - M63x1,5) Type: SKINTOP MS-M Brush 40X1,5
Sales Unit: 1 ST.
Sales unit: 5 pieces
Lieske Part No.: 459501

Cable gland SKINTOP® MS-M BRUSH 50X1.5, cable gland, M 50, clamping range (min./max.): 27 - 35 mm, wrench size 1: 65, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 69, EMC shielding, Areas of application: The 'XL' variant is particularly suitable for thick-walled housings thanks to its particularly long connection thread, Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Innovative, double lamella basket in sizes M 75 x 1.5 to M 110 x 2 simplifies assembly and Prevents leverage with heavy cables,Safe, quick and uncomplicated installation,Reliable EMC protection guaranteed even after dismantling and reinstallation, as the copper shielding braid is not damaged by the brass brush,Optimal EMC protection thanks to unique 360° brass brush, which creates a low-resistance contact between the copper shielding braid and the screw connection,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Sales unit: 5 pieces
Lieske Part No.: 140241

Cable gland SKINTOP® MS-M BRUSH 63X1.5, cable gland, M 63, clamping range (min./max.): 34 - 45 mm, wrench size 1: 67, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), IP 69, EMC shielding, Areas of application: The 'XL' variant is especially suitable for thick-walled housings thanks to its particularly long connection thread, Note: For painted, anodized or powder-coated housings, use the SKINDICHT® SM-PE-M lock nut for potential equalization, Withstands high chemical and mechanical stress, Suitable for outdoor use, taking the temperature range into account, For use on control systems, motors and frequency converters, For EMC-compliant introduction of copper-shielded cables, Benefits: Innovative, double lamella basket in sizes M 75 x 1.5 to M 110 x 2 simplifies assembly and prevents Leverage effect for heavy cables,Safe, quick and uncomplicated installation,Reliable EMC protection guaranteed even after dismantling and reinstallation, as the copper shielding braid is not damaged by the brass brush,Optimal EMC protection thanks to unique 360° brass brush, which creates a low-resistance contact between the copper shielding braid and the screw connection,Best possible sealing enables protection class IP 68 (10 bar) and IP 69
Lieske Part No.: 621106

Lapp SKINTOP® MS-M BRUSH
Faster, easier screen contact; Optimal low-resistance 360 ??° screen contact; Faster than any other comparable system; Uncomplicated and reliable; Highest assembly freedom in cable adjustment Application areas

• For EMC compliant earthing of the copper braiding, or for cables with copper shaft sheath
• Automation Systems
• Materials Handling
• Engines high power
• Inverter
Material:
Body: Nickel plated brass EMC brush: brass Seal: special elastomer O-ring: special elastomer
Protection:
IP 68
IP 69 K (M25x1,5 - M63x1,5)
Type: SKINTOP MS-M BRUSH 63x1,5 PLUS
Sales Unit: 1 ST.
Lieske Part No.: 442514

Lapp SKINTOP CLICK gland
Product Description
Fewer parts, counter nut no longer necessary; Up to 70% time saving due to innovative locking system, Simple, free
Mounting in any position, vibration protection; No thread required
Applications
Automation ¿
¿solar applications
¿cabinet
¿Measuring, control and electrical
¿HVAC
Use
¿Fewer parts, counter nut no longer necessary
¿Up to 70% time saving due to innovative locking system
¿Simple, free assembly in any position
¿Vibration protection
No thread required ¿
Standard references
¿UL File No. E79903
Scope of delivery
Contain ¿removal tool supplied
Specifications
Delivery Colour
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to +100 ° C
Clamping range
1 ¿4 mm
Type: SKINTOP CLICK M16 RAL 7035 LGY item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 369990

Lapp SKINTOP CLICK gland
Product Description
Fewer parts, counter nut no longer necessary; Up to 70% time saving due to innovative locking system, Simple, free
Mounting in any position, vibration protection; No thread required
Applications
¿Automation
¿Solar applications
¿Cabinet
¿Measuring, control and electrical
¿HVAC
Use
¿Fewer parts, counter nut no longer necessary
¿Up to 70% time saving due to innovative locking system
¿Simple, free assembly in any position
¿Vibration protection
No thread required ¿
Standard references
¿UL File No. E79903
Scope of delivery
Contain ¿removal tool supplied
Specifications
Delivery Colour
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to +100 ° C
Clamping range
1 ¿4 mm Type: SKINTOP CLICK M20 RAL 7035 LGY item: 25 ST.
Lieske Part No.: 209847

Lapp SKINTOP CLICK gland
Product Description
Fewer parts, counter nut no longer necessary; Up to 70% time saving due to innovative locking system, Simple, free
Mounting in any position, vibration protection; No thread required
Applications
¿Automation
¿Solar applications
¿Cabinet
¿Measuring, control and electrical
¿HVAC
Use
¿Fewer parts, counter nut no longer necessary
¿Up to 70% time saving due to innovative locking system
¿Simple, free assembly in any position
¿Vibration protection
No thread required ¿
Standard references
¿UL File No. E79903
Scope of delivery
Contain ¿removal tool supplied
Specifications
Delivery Colour
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to +100 ° C
Clamping range
1 ¿4 mm Type: SKINTOP CLICK M25 RAL 7035 LGY item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 478145

Lapp SKINTOP CLICK cable gland
Product description
Fewer parts, counter nut no longer needed; Up to 70% time saving due to innovative CLICK system; Simple, free
Assembly in any position; Vibration protection; No thread required
Application Areas
• Automation technology
• Solar Applications
• cabinets
• Measurement, control and. Electrical
• Air conditioning
Use
• Fewer parts, counter nut no longer needed
• Up to 70% time saving due to innovative CLICK system
• Simple, free assembly in any position
• Vibration protection
• No thread required
Norm references
• UL File no. E79903
Delivery
Included • disassembly tool supplied
Technical specifications
Colour delivered
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to + 100 ° C
Clamping range
1-4 mm
Type: SKINTOP CLICK-R M16 RAL 7035 LGY
Quantity: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 442511

Lapp SKINTOP CLICK cable gland
Product description
Fewer parts, counter nut no longer needed; Up to 70% time saving due to innovative CLICK system; Simple, free
Assembly in any position; Vibration protection; No thread required
Application Areas
• Automation technology
• Solar Applications
• cabinets
• Measurement, control and. Electrical
• Air conditioning
Use
• Fewer parts, counter nut no longer needed
• Up to 70% time saving due to innovative CLICK system
• Simple, free assembly in any position
• Vibration protection
• No thread required
Norm references
• UL File no. E79903
Delivery
Included • disassembly tool supplied
Technical specifications
Colour delivered
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to + 100 ° C
Clamping range
1-4 mm
Type: SKINTOP CLICK-R M20 RAL 7035 LGY
Quantity: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 442512

Cable gland SKINTOP® CLICK-R 25 RAL 7035 LGY, cable gland, bore diameter: 25.3mm, clamping range (min./max.): 6mm - 13mm, wrench size 1: 32mm, light grey, IP 68 - 5 bar (30 min), areas of application: solar applications, measurement, control and electrical engineering, air conditioning technology, switch cabinet construction, automation technology, benefits: fewer parts, no lock nut required, no thread required, simple, free assembly in any position, up to 70% time saving thanks to innovative locking system, vibration protection
Sales unit: 25 pieces
Lieske Part No.: 1242789

Lapp SKINTOP CLICK gland
Product Description
Fewer parts, counter nut no longer necessary; Up to 70% time saving due to innovative locking system, Simple, free
Mounting in any position, vibration protection; No thread required
Applications
¿Automation
¿Solar applications
¿Cabinet
¿Measuring, control and electrical
¿HVAC
Use
¿Fewer parts, counter nut no longer necessary
¿Up to 70% time saving due to innovative locking system
¿Simple, free assembly in any position
¿Vibration protection
No thread required ¿
Standard references
¿UL File No. E79903
Scope of delivery
Contain ¿removal tool supplied
Specifications
Delivery Colour
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to +100 ° C
Clamping range
1 ¿4 mm Type: SKINTOP CLICK M12 RAL 7035 LGY item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 496810

Lapp SKINTOP CLICK gland
Product Description
Fewer parts, counter nut no longer necessary; Up to 70% time saving due to innovative locking system, Simple, free
Mounting in any position, vibration protection; No thread required
Applications

- Automation technology

- Solar Applications

- Switchboard

- Measuring, control and electrical

- Climate control
Use

- Fewer parts, counter nut no longer necessary

- Up to 70% time saving due to innovative locking system

- Simple, free assembly in any position

- Vibration

- No thread required
Standard references

- UL File No. E79903
Scope of delivery

- Removal tool included in delivery
Specifications
Delivery Colour
RAL 7035 light gray
Material
Body: special polyamide Seal: special elastomer
Temperature range
dynamic: -20 ° C to +100 ° C
Clamping range
1-4 mm Type: SKINTOP CLICK M32 RAL 7035 LGY item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 362269

Cable gland SKINTOP® MS-M 12X1.5 ATEX, cable gland, M 12, clamping range (min./max.): 3 - 7 mm, wrench size 1: 16, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 401687

Cable gland SKINTOP® MSR-M 12X1.5 ATEX, cable gland, M 12, clamping range (min./max.): 2 - 5 mm, wrench size 1: 16, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in the Ex area, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 439814

Cable gland SKINTOP® MS-M 16X1.5 ATEX, cable gland, M 16, clamping range (min./max.): 4.5 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 944939

Cable gland SKINTOP® MSR-M 16X1.5 ATEX, cable gland, M 16, clamping range (min./max.): 4 - 7 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 439819

Cable gland SKINTOP® MS-M 20X1.5 ATEX, cable gland, M 20, clamping range (min./max.): 7 - 13 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 949064

Cable gland SKINTOP® MSR-M 20X1.5 ATEX, cable gland, M 20, clamping range (min./max.): 5 - 10 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 439823

Cable gland SKINTOP® MS-M 25X1.5 ATEX, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in potentially explosive areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 591814

Cable gland SKINTOP® MSR-M 25X1.5 ATEX, cable gland, M 25, clamping range (min./max.): 6 - 13 mm, wrench size 1: 29, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in the Ex area, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 977924

Cable gland SKINTOP® MS-M 32X1.5 ATEX, cable gland, M 32, clamping range (min./max.): 11 - 21 mm, wrench size 1: 36, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 912525

Cable gland SKINTOP® MS-M 40X1.5 ATEX, cable gland, M 40, clamping range (min./max.): 19 - 28 mm, wrench size 1: 45, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 10 pieces
Lieske Part No.: 141000

Cable gland SKINTOP® MS-M 50X1.5 ATEX, cable gland, M 50, clamping range (min./max.): 26 - 35 mm, wrench size 1: 65, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in potentially explosive areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 5 pieces
Lieske Part No.: 871030

Cable gland SKINTOP® MS-M 63X1.5 ATEX, cable gland, M 63, clamping range (min./max.): 34 - 45 mm, wrench size 1: 67, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in potentially explosive areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 5 pieces
Lieske Part No.: 387620

Cable gland SKINTOP® MS-M 63X1.5 PLUS ATEX, cable gland, M 63, clamping range (min./max.): 44 - 55 mm, wrench size 1: 75, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in the Ex area, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Lieske Part No.: 439803

Cable gland SKINTOP® MS-IS-M 25X1.5, cable gland, M 25, clamping range (min./max.): 11 - 18 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Specially designed for use on industrial connectors, Benefits: Optimum strain relief, Short connection thread for more space in the connector, Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 588716

Cable gland SKINTOP® MS-IS-M 32X1.5, cable gland, M 32, clamping range (min./max.): 16 - 25 mm, wrench size 1: 40, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), , Areas of application: Specially designed for use on industrial connectors, Benefits: Optimum strain relief, Short connection thread for more space in the connector, Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 439799

Cable gland SKINTOP® MS-M 12X1.5 ATEX XL, cable gland, M 12, clamping range (min./max.): 3 - 7 mm, wrench size 1: 16, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in hazardous areas, , Areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Mobile offshore and ship applications, Benefits: High functional reliability,Cold shock resistance,High strain relief,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 459504

Cable gland SKINTOP® CLICK 16 RAL 7001 SGY, cable gland, bore diameter: 16.3mm, clamping range (min./max.): 5mm - 9mm, wrench size 1: 22mm, silver grey, IP 68 - 5 bar (30 min), areas of application: solar applications, measurement, control and electrical engineering, air conditioning technology, switch cabinet construction, automation technology, benefits: fewer parts, no lock nut required, no thread required, simple, free assembly in any position, up to 70% time saving thanks to innovative locking system, vibration protection
Sales unit: 50 pieces
Lieske Part No.: 135502

Cable gland SKINTOP® CLICK 20 RAL 7001 SGY, cable gland, bore diameter: 20.3mm, clamping range (min./max.): 7mm - 13mm, wrench size 1: 27mm, silver grey, IP 68 - 5 bar (30 min), areas of application: solar applications, measurement, control and electrical engineering, air conditioning technology, switch cabinet construction, automation technology, benefits: fewer parts, no lock nut required, no thread required, simple, free assembly in any position, up to 70% time saving thanks to innovative locking system, vibration protection
Sales unit: 25 pieces
Lieske Part No.: 670047