Built-Command and signaling devices in Control devices / Pilot devices
Built-Command and signaling devices from Schneider Electric
 |
 Schneider Electric SZ1RV1202 2200 ohm potentiometer, SZ1-RV1202 with scale and knob
This potentiometer is a spare part for frequency converters. It is compatible with all Altivar series. The internal conversion resistance is 2.2 kOhm and the device has an IP20 protection rating.Lieske Part No.: 513763 Mfg Part No: SZ1RV1202 |
35,54 EUR
 plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric VCF02 emergency master switch , intent red / yellow
Emergency stop/main switch, 3P, 690V, 10A, in the housing. Size_A 12 A, fastening 4 screws, front plate 60 x 60 mm. Complete device, 3-pole, IP 65, with rotary drive. For fastening in the control ... Lieske Part No.: 324500 Mfg Part No: VCF02 |
32,52 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric VCFXGE2 housing, empty, IP65
Empty housing for EMERGENCY STOP/main switch. Housing, empty. Front plate 60 x 60 mm, switch block for V3. Housing with protection class IP 65. Red handle, lockable with 3 padlocks DM 4 mm to DM 8 mm ... Lieske Part No.: 580592 Mfg Part No: VCFXGE2 |
59,30 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric VZN05 auxiliary switch MODULE 1S, for VN12 / VN20
Load Disconnectors A range of safety control products that are easy to use and set up, with compact and ergonomic products for starter motor and stop motor requirements. Lieske Part No.: 587124 Mfg Part No: VZN05 |
10,86 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric VZN06 auxiliary contact module 1NC,
Load Disconnectors A range of safety control products that are easy to use and set up, with compact and ergonomic products for starter motor and stop motor requirements. Lieske Part No.: 587129 Mfg Part No: VZN06 |
10,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric VZN20 main contact module,
Load Disconnectors A range of safety control products that are easy to use and set up, with compact and ergonomic products for starter motor and stop motor requirements. Lieske Part No.: 586500 Mfg Part No: VZN20 |
10,86 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA009 mech. Locking XAC-A009, f 2 f opposing movements Hängetast
Mechanical locking for pendant control XAC A. Mechanical locking for 2 command points. Function NC + NC + NC with positive opening. For 2 opposing movements. With fixing screw. Lieske Part No.: 992894 Mfg Part No: XACA009 Type: XAC-A009 |
7,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA02 Cutter Pendant Control Enclosures, XAC-A02 for 2 items
XAC A empty housing. 2 vertical holes. Command points 2. Scope of delivery housing, internal circuit board, cable anti-kink sleeve. Cable strain relief, tensioning strap for anti-kink sleeve, ring ... Lieske Part No.: 274836 Mfg Part No: XACA02 Type: XAC-A02 |
74,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA02H7 empty enclosure, f.Hängetaster 2 vertical drilling
Empty pendant control station with 2 vertical holes for control circuits. This yellow control station is double insulated and the housing material is polypropylene. It belongs to the Harmony XAC range ... Lieske Part No.: 484271 Mfg Part No: XACA02H7 |
92,37 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA03 Cutter Pendant Control Enclosures, XAC-A03 3 command points
Empty housing Harmony XACA. 3 command points. Housing, internal circuit board, cable anti-kink sleeve. Cable strain relief, tensioning strap for anti-kink sleeve, ring eyelet. Lieske Part No.: 242305 Mfg Part No: XACA03 Type: XAC-A03 |
74,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA03H7 Schneider empty housing for pendant switch 3 vertical holes
Empty pendant control station with 3 vertical holes for control circuits. This yellow control station is double insulated and the housing material is polypropylene. It belongs to the Harmony XAC range ... Lieske Part No.: 848126 Mfg Part No: XACA03H7 |
90,59 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA04 Cutter Pendant Control Enclosures, XAC-A04 for 4 items
XAC A empty housing. 4 vertical holes. Command points 4. Scope of delivery housing, internal circuit board, cable anti-kink sleeve. Cable strain relief, tensioning strap for anti-kink sleeve, ring ... Lieske Part No.: 952631 Mfg Part No: XACA04 Type: XAC-A04 |
80,29 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA04H7 Schneider empty housing for pendant switch 4 vertical holes
Empty pendant control station with 4 vertical holes for control circuits. This yellow control station is double insulated and the housing material is polypropylene. It belongs to the Harmony XAC range ... Lieske Part No.: 624694 Mfg Part No: XACA04H7 |
100,49 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA05 Schneider empty housing for pendant switch 5 vertical holes
XAC A pendant control for control circuits The XAC A crane pendants for control circuits are designed for the toughest applications. Both complete devices and individual components are available. Lieske Part No.: 362706 Mfg Part No: XACA05 |
83,06 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA05H7 Schneider empty housing for pendant switch 5 vertical holes
Empty pendant control station with 5 vertical holes for control circuits. This yellow control station is double insulated and the housing material is polypropylene. It belongs to the Harmony XAC range ... Lieske Part No.: 848101 Mfg Part No: XACA05H7 |
103,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA06 Schneider empty housing for pendant switch 6 vertical holes
XAC A empty housing. 6 vertical holes. 6 command points. Scope of delivery: housing, internal circuit board, cable anti-kink sleeve. Cable strain relief, tensioning strap for anti-kink sleeve, ring ... Lieske Part No.: 420957 Mfg Part No: XACA06 Type: XAC-A06 |
91,77 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA06H7 Schneider empty housing for pendant switch 6 vertical holes
Lieske Part No.: 904885 Mfg Part No: XACA06H7 |
107,42 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA08 Cutter Pendant Control Enclosures, XAC-A08 for 8 elements
XAC A empty housing. 8 vertical holes. 8 command points. Scope of delivery: housing, internal circuit board, cable anti-kink sleeve. Cable strain relief, tensioning strap for anti-kink sleeve, ring ... Lieske Part No.: 720479 Mfg Part No: XACA08 Type: XAC-A08 |
90,39 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA08H7 Schneider empty housing for pendant switch 8 vertical holes
Empty pendant control station with 8 vertical holes for control circuits. This yellow control station is double insulated and the housing material is polypropylene. It belongs to the Harmony XAC range ... Lieske Part No.: 1580135 Mfg Part No: XACA08H7 |
112,86 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA12 Schneider empty housing for pendant switch 12 holes in 1 row
XAC A empty housing. 12 holes in 1 column. 12 command points. Scope of delivery: housing, internal circuit board, cable anti-kink sleeve. Cable strain relief, tensioning strap for anti-kink sleeve, ... Lieske Part No.: 657023 Mfg Part No: XACA12 Type: XAC-A12 |
114,35 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA12H7 Schneider empty housing for pendant switch 12 holes in 1 column
Empty pendant station with 12 holes in 1 column for the control circuit. This yellow control station is double insulated and the housing material is polypropylene. It belongs to the Harmony XAC range ... Lieske Part No.: 624676 Mfg Part No: XACA12H7 |
142,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA201 Schneider-A201 XAC pendant control, 2 command points
XAC A pendant control. 1 S button. Complete device, protectively insulated, for control circuits. For switching motors with 1 speed. 2 command points, 2 directions of rotation, mechanically ... Lieske Part No.: 141031 Mfg Part No: XACA201 Type: XAC-A201 |
93,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA2013 XAC-A2013 pendant control with emergency stop
Pendant control to control movements XAC Note: Other versions and accessories available on request. XAC-A pendant control device complete, insulated for control circuits for switching motors Speed ... Lieske Part No.: 978718 Mfg Part No: XACA2013 Type: XAC-A2013 |
74,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Schneider Electric XACA2033 pendant station 2, pushbutton 1NO + 1NC 1 emergency stop pushbutton, 1 NC
Pendant control station with 2 push buttons and emergency stop push button for control circuits. This yellow control station is double insulated and the housing material is polypropylene. It belongs ... Lieske Part No.: 414317 Mfg Part No: XACA2033 |
82,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|