Eaton Power Quality 3P1300UD UPS 1300 VA 840 W DIN USB content_copy

The Eaton Power Quality 3P1300UD is an UPS (Uninterruptible Power Supply) in tower format, designed for use in office environments, server rooms, or IT infrastructures. The device is based on a standby topology (also called offline topology), in which the load is normally supplied directly from the mains. In the event of a power failure or voltage fluctuation, the UPS switches within milliseconds to the internal battery, ensuring uninterrupted power supply. The output capacity is 1.3 kVA, with a maximum output power of 840 W. The waveform is stepped, which is sufficient for powering standard IT devices, but not suitable for sensitive equipment with high power quality requirements.

Applications
This UPS is suitable for use in offices, workstations, network devices, printers, or small servers, where short-term power interruptions must be avoided. The operating voltage ranges are 161 V to 284 V at the input, providing high tolerance to voltage fluctuations. The output voltage is within the same range, ensuring stable operation even with unstable mains supply. The frequency ranges are 46 to 70 Hz at the input and 50/60 Hz at the output, ensuring compatibility with European and international power grids.

Functions and Equipment in Detail
The device features 8 AC outlets with C13 connectors, suitable for connecting standard IT devices. Two USB 2.0 ports allow charging of mobile devices such as smartphones or tablets. An Ethernet LAN port (RJ-45) is also integrated, enabling network control and monitoring of the UPS over a local network. Control is performed via buttons, and the status is displayed on an LED display. The UPS is equipped with overload protection to prevent damage from overloads, and includes automatic shutdown to avoid damage during prolonged power outages.

Technology Explained Simply
The standby topology means that the battery is inactive during normal operation and only activated during power failure or voltage fluctuations. This results in a high efficiency of 97 %, ensuring efficient power usage. The efficiency value in ECO mode is also 97 %, indicating optimized energy consumption. The battery has a capacity of 7 Ah at a voltage of 12 V, providing limited backup time. The output power factor is 0.6, meaning the UPS can only deliver 60 % of its rated power at a power factor of 1. The average power consumption during operation is 26 W, which is typical for a standby UPS. The noise level is 25 dB, ensuring quiet operation in office environments.

Compatibility and Accessories
The UPS comes with a C14 input cable, enabling connection to a standard power outlet. The certifications include IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3, CE, UKCA, Ukr, and Cm, confirming compliance with European and international standards. The conformity certificates include CB, CE, RoHS, and WEEE, taking environmental compatibility and disposal regulations into account. The UPS is designed for operation at temperatures from 0 to 40 °C and relative humidity from 0 to 95 %.

Mounting and Installation
The device has a tower form factor and is black in colour. Dimensions are 81 mm (width), 312 mm (depth), and 305 mm (height), with a weight of 7 kg. Installation is performed using the included USB cable and the quick installation guide, which describes connection and basic configuration. The UPS can be directly connected to a power outlet without additional mounting aids.

Operational Advantages
The high efficiency of 97 % ensures low operating costs. The integrated USB ports and LAN port enable flexible use. Automatic shutdown and overload protection increase safety. The low noise emission of 25 dB makes the UPS suitable for office environments. The certifications ensure the reliability and safety of the device.

Battery
Battery capacity	7 Ah
Battery voltage	12 V
Certificates
Compliance certificates	CB, CE, RoHS, WEEE
Certification	IEC/EN 62040-1 IEC/EN 62040-2 IEC/EN 62040-3 CE UKCA Ukr Cm
Waste Electrical and Electronic Equipment (WEEE) compliance
Design
Form factor	Tower
Product colour	Black
Control type	Buttons
Display type	LED
Features
UPS topology	Standby (Offline)
Output power capacity	1.3 kVA
Output power	840 W
Waveform	Stepwise
Input operation voltage (min)	161 V
Input operation voltage (max)	284 V
Input frequency	46/70 Hz
Output operation voltage (min)	161 V
Output operation voltage (max)	284 V
Output frequency	50/60 Hz
Power consumption (average operating)	26 W
Number of input phases	1
Number of output phases	1
Efficiency	97%
Efficiency (ECO mode)	97%
Output power factor	0.6
Noise level	25 dB
Surge protection
Auto shut-off
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Other features
Input connection type	C14
Nominal input voltage	220-240 V
Relative humidity	0 - 95%
Packaging content
Cables included	USB cable
Quick installation guide
Packaging data
Package type	Box
Ports & interfaces
AC outlet types	C13 coupler
AC outlets quantity	8 AC outlet(s)
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
USB port
Weight & dimensions
Width	81 mm
Depth	312 mm
Height	305 mm
Weight	7 kg

---