DIGITUS DK-1617-050 Patch cable Cat6 U/UTP 2xRJ45 5.0 m grey LSZH content_copy

The DIGITUS patch cable DK-1617-050 is a network cable of category 6, designed for use in modern IT and telecommunications installations. It has a length of 5 m and is constructed as a U/UTP cable (unshielded twisted pair), making it suitable for standard network applications. The cable construction consists of four pairs of twisted conductors (4x2), with the inner conductors made of copper (Cu). The AWG cross-section is 26, ensuring sufficient current and signal transmission for the intended applications. The pin assignment follows the 1:1 standard, enabling a direct connection between the connection points.

Applications
This cable is designed for use in local area networks (LAN), particularly in office environments, server rooms, or for connecting end devices such as computers, switches, routers, and network printers. Category 6 enables data transmission rates up to 1 Gbit/s over the full length of 5 m. Support for PoE, PoE+, and PoE++ (IEEE 802.3af, 3at, bt) makes the cable suitable for powering IP cameras, access points, or VoIP phones, with power supplied via the network cable.

Functions and features in detail
A central feature is the molded strain relief boot, which provides tension relief and reduces mechanical stress on the connector. The boot is gray and includes a latch protection mechanism that prevents cable snagging and prevents the latch from breaking off the RJ45 connector. The connectors themselves are transparent red, enabling quick visual identification of category 6. The outer jacket is made of LSZH material (Low Smoke Zero Halogen), ensuring low smoke emission and no release of halogens in case of fire.

Technology explained simply
The cable construction with four twisted pairs reduces electromagnetic interference (near-end crosstalk, NEXT) and improves signal quality. The frequency bandwidth has been tested up to 250 MHz, meeting the requirements of ISO/IEC 11801 and DIN EN 50173 CAT 6 standards. The NVP value (Velocity of Propagation) is 69 %, describing the signal propagation speed in the cable and relevant for calculating signal delays. The flame-retardant design and halogen-free material increase safety in enclosed spaces.

Compatibility and accessories
The cable is equipped with RJ45 connectors (8(8)) at both ends, enabling universal connection to standard network ports. It is compatible with devices supporting PoE technologies and can be used in existing CAT 6 infrastructures. Use in combination with other CAT 6 components ensures consistent network performance.

Installation and mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets. The strain relief boot facilitates handling and protects the connectors during bending and tension loads. The gray color of the outer jacket allows for discreet integration into existing cable routes. The cables are intended for indoor use.

Operational advantages
The combination of copper conductors, LSZH jacket, and strain relief ensures a reliable, safe, and long-lasting connection. Support for PoE technologies reduces the need for additional power supplies. The red connector coloring simplifies maintenance and identification in the network. Compliance with international standards (ISO/IEC 11801, DIN EN 50173) ensures consistent quality and performance.

Scope of delivery
DIGITUS cat.6 U/UTP patch cable, Cu, LSZH, 5m

General
Cable type	U/UTP
Category	6
Type of connector connection 1	RJ45 8(8)
Type of connector connection 2	RJ45 8(8)
Colour outer sheath	Grey
Anti-kink sleeve	Moulded-on
Colour anti-kink sleeve	Grey
Cable construction	4x2
AWG-size	26
Pin assignment	1:1
NVP value	69 %
Conductor	Copper
Frequency bandwidth	250 MHz
Standard	ISO/IEC 11801, DIN EN 50173 CAT 6
Outer sheath	LSZH
Locking lever
Fire retardant version
Halogen free
Oil resistant (acc. EN 60811-404)
PoE support
PoE+ support
PoE++ support

---