DIGITUS DK-1612-005 Patch cable Cat6 U/UTP 2xRJ45 0.5 m grey latch protection poly bag content_copy

The DIGITUS patch cable type DK-1612-005 is a network cable of category 6, designed for use in local area networks (LAN) and for connecting end devices such as computers, switches, routers, or network printers. It has a length of 0.5 metres and is constructed as U/UTP (unshielded, unshielded twisted-pair structure), making it suitable for standard applications in office environments or private households. The cable construction consists of four pairs of twisted-pairs with an AWG 26/7 structure, ensuring stable data transmission. The cable is grey in colour, with the connectors tinted transparent red to visually identify the category 6.

Applications
This cable is designed for use in IT and telecommunications installations, particularly in environments requiring data transmission up to a frequency of 250 MHz. It complies with the standards ISO/IEC 11801 and DIN EN 50173 CAT 6, which apply to category 6 class E. These standards ensure high performance and compatibility with modern network devices. The cables are intended for use in small information and telecommunications devices, which can also be used in private households.

Functions and Features in Detail
RJ45 connectors (8P8C) are mounted at both ends of the cable, each equipped with a moulded strain relief boot. This boot provides tension relief to reduce mechanical stress on the connector and includes a latch protection feature to prevent cable snagging and the latch from breaking off the connector. The red tinting of the connectors allows for quick visual identification of the category 6 cable.

Technology Explained Simply
The designation U/UTP means that the cable is unshielded, with individual pairs constructed as twisted-pairs. This twisting reduces electromagnetic interference and near-end crosstalk (NEXT), which is important for reliable data transmission. The AWG 26/7 structure describes the wire cross-section (26 AWG) and the number of wires per conductor (7), ensuring sufficient conductivity and mechanical stability. The maximum bandwidth of 250 MHz enables data transmission rates up to 1000 Mbit/s (Gigabit Ethernet) and is suitable for future requirements such as PoE (Power over Ethernet), provided the devices support it.

Compatibility and Accessories
The cable is compatible with all devices featuring RJ45 connectors (8P8C) and supporting category 6 or lower categories. It can be used in existing network infrastructures that comply with ISO/IEC 11801 and DIN EN 50173 standards. Using it in combination with other DIGITUS cabling components of category 6 ensures consistent performance.

Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots facilitate cable routing and prevent damage from bending or pulling. The cables are intended for indoor use, and no special mounting aids or tools are required.

Operational Advantages
The cables offer reliable and stable data transmission, suitable for daily operation in offices or private networks. The integrated protective features on the connectors increase service life and prevent mechanical damage. The clear visual marking of category 6 simplifies the management and maintenance of network infrastructure.

General
Cable standard	Cat 6
Shielding	U/UTP
Cable length	0,5 m
Connector type	RJ45 (8P8C)
Cable structure	4x 2 AWG 26/7, Twisted Pair
Colour	Grey
Plug colour	transparent red
Maximum bandwidth	250 MHz
Manufacturing standard	ISO/IEC 11801, DIN EN 50173 CAT 6
Tension relief
Bend protection
Locking lever

---