DEHN 953206 DRM2P30FM surge arrester Type 3 rail M 2-pole 30 V
|
150,57 EUR 152,36 EUR |
|||||||||||
|
( 179,18 EUR incl. VAT ) ≈ £125.88 | ≈ $166.38 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |||||||||||
| In Stock: 4 pieces | |||||||||||
| Lieske Part No.: | 387786 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 953206 | ||||||||||
| UPC/EAN: | 4013364109711 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | DR M 2P 30 FM | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Surge Protection from DEHNFurther products in category Surge Protection
All products of DEHN
Product information for DEHN 953206:
The DEHN surge arrester type DR M 2P 30 FM is a two-pole, modular protection device of the brand DEHN, specifically designed for use in enclosures of industrial electronics. The device protects the power supply of sensitive electronic equipment against transient overvoltages caused by lightning strikes, switching operations, or other electrical disturbances. It is a surge arrester of Type 3 category according to the standard EN 61643-11, integrated into the lightning protection zone concept, and can be used at interfaces 1 to 2 and higher. The construction consists of a base element and an inserted protection module, enabling flexible and modular mounting.
Applications
The arrester is intended for use in industrial environments, particularly in enclosures where electronic controls, frequency converters, PLC systems, or other sensitive devices are connected to the power grid. It protects these devices against short-term voltage spikes caused by external influences such as lightning discharges or internal switching operations in the network. The application is part of a multi-stage lightning protection concept, where this arrester serves as the third stage (Type 3) installed directly before the device to be protected.
Functions and Equipment in Detail
The arrester features a high surge current capacity, achieved through a combination of zinc oxide varistors and spark gaps. This technology enables a rapid response to overvoltages and efficient dissipation of energy to protect connected devices. The modular design allows for easy integration into existing enclosure systems, especially in combination with the DEHNrail system. The two-pole configuration covers the protection function for two conductors, typically phase conductors in a three-phase system or lines in a single-phase system.
Technology Explained Simply
Zinc oxide varistors react to voltage spikes by suddenly becoming conductive when a certain threshold voltage (here 30 V) is exceeded, thereby diverting excess energy. The spark gap complements this function by serving as an additional discharge path during high energy absorption. The combination of both elements ensures a robust and reliable protection function. The protection voltage of 30 V is suitable for applications in industrial electronics, where operating voltage is often below 50 V, for example in control systems or sensors.
Compatibility and Accessories
The arrester is part of the DEHNrail modular system and can be combined with other components of this system to realize a comprehensive protection concept. It is designed for use in enclosures and fits into the standard module track of the DEHNrail platform. It is used in conjunction with other surge protection devices installed in the previous protection stages (Type 1 and Type 2) to form a complete protection chain.
Mounting and Installation
Mounting is done by inserting the protection module into the base element, which is attached to the DEHNrail module track. Installation is carried out directly before the device to be protected, with electrical connections performed according to regulations and the specific installation. The modular design enables quick and secure mounting without additional tools.
Advantages in Operation
The arrester provides reliable protection for sensitive electronic devices in industrial installations. The modular construction facilitates maintenance and replaceability, while the combination of zinc oxide varistor and spark gap ensures high efficiency in diverting overvoltages. Compliance with the standard EN 61643-11 ensures conformity with applicable safety standards for surge protection devices.
Applications
The arrester is intended for use in industrial environments, particularly in enclosures where electronic controls, frequency converters, PLC systems, or other sensitive devices are connected to the power grid. It protects these devices against short-term voltage spikes caused by external influences such as lightning discharges or internal switching operations in the network. The application is part of a multi-stage lightning protection concept, where this arrester serves as the third stage (Type 3) installed directly before the device to be protected.
Functions and Equipment in Detail
The arrester features a high surge current capacity, achieved through a combination of zinc oxide varistors and spark gaps. This technology enables a rapid response to overvoltages and efficient dissipation of energy to protect connected devices. The modular design allows for easy integration into existing enclosure systems, especially in combination with the DEHNrail system. The two-pole configuration covers the protection function for two conductors, typically phase conductors in a three-phase system or lines in a single-phase system.
Technology Explained Simply
Zinc oxide varistors react to voltage spikes by suddenly becoming conductive when a certain threshold voltage (here 30 V) is exceeded, thereby diverting excess energy. The spark gap complements this function by serving as an additional discharge path during high energy absorption. The combination of both elements ensures a robust and reliable protection function. The protection voltage of 30 V is suitable for applications in industrial electronics, where operating voltage is often below 50 V, for example in control systems or sensors.
Compatibility and Accessories
The arrester is part of the DEHNrail modular system and can be combined with other components of this system to realize a comprehensive protection concept. It is designed for use in enclosures and fits into the standard module track of the DEHNrail platform. It is used in conjunction with other surge protection devices installed in the previous protection stages (Type 1 and Type 2) to form a complete protection chain.
Mounting and Installation
Mounting is done by inserting the protection module into the base element, which is attached to the DEHNrail module track. Installation is carried out directly before the device to be protected, with electrical connections performed according to regulations and the specific installation. The modular design enables quick and secure mounting without additional tools.
Advantages in Operation
The arrester provides reliable protection for sensitive electronic devices in industrial installations. The modular construction facilitates maintenance and replaceability, while the combination of zinc oxide varistor and spark gap ensures high efficiency in diverting overvoltages. Compliance with the standard EN 61643-11 ensures conformity with applicable safety standards for surge protection devices.
| General | |
| Norm | EN 61643-11 |
| Degree of protection | two-pole |
| Protection voltage | 30 V |
| Technology | Zinc oxide varistor / spark gap combination |
| System | DEHNrail modular |
| Application range | control cabinets, industrial electronics |
| Application | lightning protection zone concept, interfaces 1-2 and higher |
Questions & answers
What is the delivery time of DEHN 953206 DRM2P30FM surge arrester Type 3 rail M 2-pole 30 V?
The article DEHN 953206 DRM2P30FM surge arrester Type 3 rail M 2-pole 30 V is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 953206 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DEHN 953206 DRM2P30FM surge arrester Type 3 rail M 2-pole 30 V always at the best possible price. We can give you a discount of 2% on DEHN 953206 DRM2P30FM surge arrester Type 3 rail M 2-pole 30 V if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of DEHN 953206 DRM2P30FM surge arrester Type 3 rail M 2-pole 30 V we can offer you a price of 141,54 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.