DEHN 478410 EWDMVK8.10 M10 L100 300 V4A earth/panel penetration 100–300 mm L320 mm
|
58,99 EUR |
|||||||||||
|
( 70,20 EUR incl. VAT ) ≈ £49.37 | ≈ $64.83 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 546202 | ||||||||||
| Mfg Part No: | 478410 | ||||||||||
| UPC/EAN: | 4013364136335 | ||||||||||
| Weight: | 0.58 kg | ||||||||||
| Type: | EWD MVK8.10 M10 L100 300 V4A | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for DEHN 478410:
Applications
This penetration is intended for retrofitted installation in existing walls. To do so, a hole with a diameter of 14 mm is drilled, or the pre-formed spacing of the formwork is used. The construction is designed for installation depths up to 10 m relative to standing water, which is verified by a pressure water test up to 1 bar. This makes the component suitable for applications in wet rooms, such as bathrooms, cellars, or outdoor installations, where tight sealing against water pressure is required.
Functions and equipment in detail
The product consists of a sealing flange with a diameter of 80 mm, made of NIRO (V4A). The seals are made of neoprene, an elastic material that ensures tight sealing. The MV clamp enables secure fastening of the earth or equipotential bonding conductor within the penetration body. The threaded rod has a length of 308 mm and is secured with an M10 nut made of NIRO to fix the penetration in the building component. The penetration length (l2) ranges from 100 to 300 mm, allowing adaptation to different wall thicknesses.
Technology explained clearly
The material NIRO (V4A) corresponds to material numbers 1.4571, 1.4404, and 1.4401, as well as ASTM/AISI designations 316Ti, 316L, and 316. This stainless steel material is corrosion-resistant and suitable for use in damp and aggressive environments. The pressure water test up to 1 bar ensures that the penetration remains watertight even under water pressure, which is important for use in wet rooms or deep installation positions. The short-circuit current is 2.7 kA for 1 second at a temperature of no more than 300 °C, describing the electrical load capacity of the component under extreme conditions.
Compatibility and accessories
The earth and wall penetration is designed for round conductors with a diameter of 8 to 10 mm. The MV clamp enables secure connection of the conductor. The M10 threaded rod is intended for fastening in the building component. The standard reference is DIN EN 62561-1, confirming compliance with applicable standards for earthing systems. The product is marked with a TÜV test mark, confirming conformity with technical requirements.
Installation and mounting
Installation is carried out by drilling a hole in the wall with a diameter of 14 mm or by using the pre-formed spacing of the formwork. The threaded rod is screwed into the wall and secured with the nut. The MV clamp is connected to the conductor, with the seals and sealing flange ensuring the seal. The penetration length can be adjusted between 100 and 300 mm depending on the wall thickness.
Advantages in operation
The use of NIRO (V4A) ensures high corrosion resistance and long service life of the component. The pressure-water-tight design enables use in damp and wet environments. The MV clamp ensures a secure and durable connection of earth or equipotential bonding conductors. The pressure water test up to 1 bar ensures functionality even under water pressure. Compliance with standard DIN EN 62561-1 and the TÜV test mark confirm the quality and reliability of the product.
| General | |
| Length of bushing (l2) | 100-300 mm |
| Length of threaded rod (l1) | 308 mm |
| Sealings | Neoprene |
| Sealing disk Ø | 80 mm |
| Material of disc | StSt (V4A) |
| Material No. | 1.4571 / 1.4404 / 1.4401 |
| Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C) | 2.7 kA |
| Standard | EN 62561-1 |
Questions & answers
What is the delivery time of DEHN 478410 EWDMVK8.10 M10 L100 300 V4A earth/panel penetration 100–300 mm L320 mm?
The article DEHN 478410 EWDMVK8.10 M10 L100 300 V4A earth/panel penetration 100–300 mm L320 mm is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 478410 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DEHN 478410 EWDMVK8.10 M10 L100 300 V4A earth/panel penetration 100–300 mm L320 mm always at the best possible price. We can give you a discount of 2% on DEHN 478410 EWDMVK8.10 M10 L100 300 V4A earth/panel penetration 100–300 mm L320 mm if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of DEHN 478410 EWDMVK8.10 M10 L100 300 V4A earth/panel penetration 100–300 mm L320 mm we can offer you a price of 56,34 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



