Accessories from Cyberdata

The Conduit Speaker Mount is the latest option for installing the CyberData SIP, Singlewire and Syn-Apps speakers. Constructed from galvanized steel, the easy-to-assemble cylindrical design gives the finished look of the mount and speaker a clean and modern look.
Easy to Install
Galvanized Steel construction
RoHS compliant
Lieske Part No.: 941475

The CyberData Auxiliary Analog Speaker is an option for the CyberData SIP Speaker to expand the coverage area.
Low cost 2nd speaker option that attaches to the SIP or SingleWire speakers
Mounting hardware supplied
Choice of colors
Lieske Part No.: 731572

The new PoE Power Injector 802.3at is used with CyberData's SIP Paging Amplifier (Part # 011061) and SIP Speaker Amplifier (AC - Part # 011095 and Wireless - Part # 011096) to deliver up to 25 watts of drive power.
Fanless design Over-current protection Short-circuit protection Green mode
Lieske Part No.: 941440

The CyberData wall mount adapter enables the various CyberData SIP, Singlewire and Syn-Apps speakers to be wall mounted.
Mounting kit included
Electro-galvanized steel construction
RoHS compliant
Top and bottom cable channels
Lieske Part No.: 941441

The CyberData SIP Paging Zone Controller with Audio-Out enables access to existing paging speakers via a VoIP telephone system. The interface is designed to use a standard paging amplifier with audio inputs and supports up to 15 zone groups from a VoIP phone.
Now Supports Up To 9 Stored Messages Delayed paging Night ringer Compatibility with more IP/PBX servers SIP RFC 3261 compatible Dual speed 10/100 Mbps Page up to 15 paging zone groups Web-based configuration Web-based firmware upgradeable PoE 802.3af enabled (Power -over Ethernet) Connector for external power supply Small footprint
Lieske Part No.: 751477

The remote call button is included in the scope of delivery of the SIP Talk Back Speaker (011180/011181). However, it is an add-on option for the Singlewire InformaCast® Talk Back Speaker and is sold separately. The remote call button enables a call to the SIP or Singlewire InformaCast® Talkback speaker, which can be initiated or answered from a remote controlled switch. When enabled via the web interface, pressing the remote call button will cause the speaker to initiate a call to a specified extension.
Lieske Part No.: 731583

The Weather Shroud is available for our SIP Outdoor Intercom and the Singlewire InformaCast® Outdoor Intercom and offers even greater weather protection.
Optional Weather Shroud (pictured) for even greater weather protection
Lieske Part No.: 731701

306/5000
The Ceiling Tile Drop-In Auxiliary Analog Speaker is the latest option for installing the CyberData Auxiliary Analog Speaker. The drop-in design combines easy installation with a streamlined look. This Drop-In Auxiliary Speaker is an option for the CyberData SIP Speaker to expand the coverage area.
Easy to Install 1' x 2' Drop-In Design
Aluminum construction
Lieske Part No.: 751382

Our extensive line of indoor and outdoor SIP-enabled intercoms provide two-way communication and secure access control for your VoIP phone system. These devices are ideal for events such as commercial/residential complexes, schools and universities, retail establishments, warehouse and manufacturing facilities, SMB, parking garages and shipyards and much more.
New Features
Optional red/green/blue/white strobe kit connection available (part number 011288)
Integrates with Network Dual Door Strike Relay Module (part number 011375) and Door Strike Relay Module (part number 011269)
Now with enhanced acoustic echo canceler
Features
PoE 802.3af enabled (Power-over-Ethernet)
SIP compliant
Full-duplex voice operation
Now supports SRST (Survivable Remote Site Telephony) in a Cisco environment
Streamlined case design
Network web management and firmware download
Network adjustable speaker volume
Concurrent SIP and multicast paging
Dry relay contact for auxiliary control
Door closure and tamper alert signal
Downloadable alert, ringtones and callout messages
Lieske Part No.: 731401

Our extensive line of indoor and outdoor SIP-enabled intercoms provide two-way communication and secure access control for your VoIP phone system. These devices are ideal for events such as commercial/residential complexes, schools and universities, retail establishments, warehouse and manufacturing facilities, SMB, parking garages and shipyards and much more.
New Features Optional red/green/blue/white strobe kit connection available (part number 011288) Integrates with Network Dual Door Strike Relay Module (part number 011375) and Door Strike Relay Module (part number 011269) Now with enhanced acoustic echo canceler Features PoE 802.3af enabled (Power-over-Ethernet) SIP compliant Full-duplex voice operation Now supports SRST (Survivable Remote Site Telephony) in a Cisco environment Streamlined case design Network web management and firmware download Network adjustable speaker volume Concurrent SIP and multicast paging Dry relay contact for auxiliary control Door closure and tamper alert signal Downloadable alert, ringtones and callout messages
Lieske Part No.: 751383

Our extensive line of indoor and outdoor SIP-enabled intercoms provide two-way communication and secure access control for your VoIP phone system. These devices are ideal for events such as commercial/residential complexes, schools and universities, retail establishments, warehouse and manufacturing facilities, SMB, parking garages and shipyards and much more.
New Features
Optional red/green/blue/white strobe kit connection available (part number 011288)
Integrates with Network Dual Door Strike Relay Module (part number 011375) and Door Strike Relay Module (part number 011269)
Now with enhanced acoustic echo canceler
Features
PoE 802.3af enabled (Power-over-Ethernet)
12-key keypad with backlight
Programmable speed dial
SIP compliant
Full-duplex voice operation
Now supports SRST (Survivable Remote Site Telephony) in a Cisco environment
Streamlined case design
Optional weather shroud for even greater weather protection
Network web management and firmware download
Network adjustable speaker volume
Concurrent SIP and multicast paging
Dry relay contact for auxiliary control
Door closure and tamper alert signal
Downloadable alert, ringtones and callout messages
Lieske Part No.: 143876

The CyberData SIP-enabled SIP Office Ringer is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) notification device that easily connects to existing local area networks (LANs) with a single cable connection. The SIP Office Ringer provides a user-uploadable audible ring indicator when part of a ring group. The SIP Office Ringer also supports direct SIP voice paging and priority-based multicast broadcasts.
New Features Optional red/green/blue/white strobe kit connection available (part number 011288) Now with enhanced acoustic echo canceler Features PoE 802.3af enabled (Power-over-Ethernet) SIP compliant Full-duplex voice operation Now supports SRST (Survivable Remote Site Telephony) in a Cisco environment Streamlined case design Network web management and firmware download Network adjustable speaker volume Concurrent SIP and multicast paging Dry relay contact for auxiliary control Door closure and tamper alert signal Downloadable alert, ringtones and callout messages
Lieske Part No.: 751381

The CyberData SIP Paging Adapter is a VoIP endpoint that connects analog paging systems with SIP and multicast-based audio sources. The SPA (SIP Paging Adapter) can be configured to support two separate SIP extensions. SIP extension passes audio through the analog output spoken by the caller's handset. When invoked, SIP Extension Two plays a bell audio that can be used as a night ringer when configured in a night ring group. The SPA supports up to 9 user-loadable messages that can be played by a DTMF command. The SPA supports a line-in input for playing MOH.
Two SIP extensions Voice prompt pass code and page control 9 user-uploadable page messages 10 channel prioritized Multicast ports HTTP Web Interface and setup Built-in diagnostics 10k Ohm input for background music 600 Ohm Balanced audio out Unbalanced Line-Out Remote amp fault sensor DTMF and programmatic controlled Relay Delayed page support DTMF pass-through Cisco SRST 10/100 802.3af PoE
PBX Compatibility: http://www.cyberdata.net/connecting-to-ip-pbx-servers/
Lieske Part No.: 731584