Installation Material from Cimco

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M8 mm, length: 40 mm, SW 13, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 646924

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M8 mm, length: 50 mm, SW 13, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 306369

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M8 mm, length: 60 mm, SW 13, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 401550

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M10 mm, length: 20 mm, SW 17, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 932376

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M10 mm, length: 30 mm, SW 17, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 421109

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M10 mm, length: 40 mm, SW 17, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 689533

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M10 mm, length: 50 mm, SW 17, pack of 50.
Sales unit: 50 pieces
Lieske Part No.: 150908

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M10 mm, length: 70 mm, SW 17, pack of 25
Sales unit: 25 pieces
Lieske Part No.: 958134

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M12 mm, length: 25 mm, SW 19, pack: 50
Sales unit: 50 pieces
Lieske Part No.: 243918

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M12 mm, length: 30 mm, SW 19, pack: 50
Sales unit: 50 pieces
Lieske Part No.: 265302

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M12 mm, length: 40 mm, SW 19, pack: 50
Sales unit: 50 pieces
Lieske Part No.: 584688

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M12 mm, length: 50 mm, SW 19, pack: 50
Sales unit: 50 pieces
Lieske Part No.: 801579

Machine hexagon screws according to DIN 933, with thread up to the head, tempered steel, galvanized, grade 8.8. Design: Ø: M12 mm, length: 60 mm, SW 19, pack: 50
Sales unit: 50 pieces
Lieske Part No.: 370817

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M3 mm, length: 10 mm, slot size: 5.5x0.8 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 700792

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M3 mm, length: 16 mm, slot size: 5.5x0.8 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 956429

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M3 mm, length: 20 mm, slot size: 5.5x0.8 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 700705

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M3 mm, length: 30 mm, slot size: 5.5x0.8 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 306129

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M4 mm, length: 10 mm, slot size: 7.0x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 361864

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M4 mm, length: 16 mm, slot size: 7.0x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 903814

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M4 mm, length: 20 mm, slot size: 7.0x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 626811

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M4 mm, length: 25 mm, slot size: 7.0x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 516131

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M4 mm, length: 30 mm, slot size: 7.0x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 276412

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M4 mm, length: 40 mm, slot size: 7.0x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 763820

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M5 mm, length: 10 mm, slot size: 8.5x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 153150

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M5 mm, length: 16 mm, slot size: 8.5x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 684347

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M5 mm, length: 20 mm, slot size: 8.5x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 187353

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M5 mm, length: 25 mm, slot size: 8.5x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 712015

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M5 mm, length: 30 mm, slot size: 8.5x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 448773

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M5 mm, length: 40 mm, slot size: 8.5x1.2 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 216710

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M6 mm, length: 10 mm, slot size: 10.0x1.6 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 114550

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M6 mm, length: 16 mm, slot size: 10.0x1.6 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 671204

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M6 mm, length: 20 mm, slot size: 10.0x1.6 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 431175

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M6 mm, length: 25 mm, slot size: 10.0x1.6 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 665768

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M6 mm, length: 30 mm, slot size: 10.0x1.6 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 997486

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M6 mm, length: 40 mm, slot size: 10.0x1.6 mm, pack: 100.
Sales unit: 100 pieces
Lieske Part No.: 783602

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M8 mm, length: 30 mm, slot size: 13.0x2.0 mm, pack size: 50.
Sales unit: 50 pieces
Lieske Part No.: 190873

Cylinder head screw according to ISO 1207, EN 21207 or DIN 84, form A, with slot, made of tempered steel, galvanized, grade 4.8. Design: Ø: M8 mm, length: 40 mm, slot size: 13.0x2.0 mm, pack size: 50.
Sales unit: 50 pieces
Lieske Part No.: 584890

Threaded rod (threaded bolt), according to DIN 976, steel, galvanized, length 1000 mm. Design: Ø: 4 mm, PU: 1.
Lieske Part No.: 335134

Threaded rod (threaded bolt), according to DIN 976, steel, galvanized, length 1000 mm. Design: Ø: 5 mm, PU: 1.
Lieske Part No.: 337842

Threaded rod (threaded bolt), according to DIN 976, steel, galvanized, length 1000 mm. Version: Ø: 6 mm, PU: 1.
Lieske Part No.: 964634

Threaded rod (threaded bolt), according to DIN 976, steel, galvanized, length 1000 mm. Design: Ø: 8 mm, PU: 1.
Lieske Part No.: 827010

Threaded rod (threaded bolt), according to DIN 976, steel, galvanized, length 1000 mm. Design: Ø: 10 mm, PU: 1.
Lieske Part No.: 144897

Threaded rod (threaded bolt), according to DIN 976, steel, galvanized, length 1000 mm. Version: Ø: 12 mm, PU: 1.
Lieske Part No.: 611653

General purpose chipboard screw, made of hardened steel, galvanized, half-round head (pan head) with hexagon socket drive. Design: Ø: 3.0 mm, length: 20 mm, T10, pack of 200.
Sales unit: 200 pieces
Lieske Part No.: 642096

General purpose chipboard screw, made of hardened steel, galvanized, half-round head (pan head) with hexagon socket drive. Design: Ø: 3.5 mm, length: 16 mm, T15, pack of 200.
Sales unit: 200 pieces
Lieske Part No.: 947183

General purpose chipboard screw, made of hardened steel, galvanized, half-round head (pan head) with hexagon socket drive. Design: Ø: 3.5 mm, length: 20 mm, T15, pack of 200.
Sales unit: 200 pieces
Lieske Part No.: 715988

General purpose chipboard screw, made of hardened steel, galvanized, half-round head (pan head) with hexagon socket drive. Design: Ø: 3.5 mm, length: 30 mm, T15, pack of 200.
Sales unit: 200 pieces
Lieske Part No.: 559411

The Cimco all-purpose screw 191210 is a particleboard screw made of hardened steel with a zinc-coated surface, designed for use in the electrical and installation industry. It features a pan head and an internal hex drive, specifically designed for TX tools. The screw has a shaft diameter of 3.5 mm and an overall length of 40 mm, with the drive designed for tool type T15. The packaging unit contains 200 pieces. This screw is particularly suitable for fastening particleboard, but also for general mounting tasks in electrical installations where a robust, corrosion-resistant connection is required.

Applications

The screw is used in the electrical and installation industry where secure fastening of components to particleboard or similar materials is required. It is suitable for indoor applications, particularly in drywall constructions, where high mechanical strength and sufficient corrosion resistance are ensured by the zinc coating.

Functions and Equipment in Detail

The screw features a pan head, which has a flat, rounded head shape and can be recessed well into the surface of the workpiece to enable a clean, flush connection. The internal hex drive (TX) allows for precise and secure turning with special TX tools, ensuring screwing without slipping. The zinc coating protects the steel surface from corrosion, especially in dry indoor environments. The screw is made of hardened steel, ensuring high strength and resistance to breakage and deformation.

Technology Explained Simply

The shaft diameter of 3.5 mm and the overall length of 40 mm define the mechanical fit of the screw for typical particleboard and components in electrical installations. The zinc coating forms a protective layer that delays oxidation of the steel. The hardness of the steel ensures that the screw does not break or deform even under load. The pan head allows for a flat seating surface that fits well into the surface of the workpiece, achieving a clean and aesthetically pleasing installation. The TX drive T15 is a standard for screwdrivers in the electrical industry and ensures a secure and slip-free connection.

Compatibility and Accessories

The screw is compatible with standard TX tools of size T15. It can be used in combination with particleboard, drywall panels, or similar building elements commonly used in the electrical and installation industry.

Mounting and Installation

Installation is carried out using a TX screwdriver of size T15. The screw is inserted vertically into the workpiece, with the pan head shape allowing for a flat seating surface. The zinc coating protects against corrosion during the installation process, especially if the screw is temporarily exposed in damp environments. The screw is suitable for manual or electric screwdrivers, with the use of an electric tool reducing installation time.

Advantages in Operation

The screw offers high mechanical strength due to the use of hardened steel, ensuring long service life and reliability under load. The zinc coating increases corrosion resistance, especially in dry indoor environments. The pan head enables a flat, clean installation that fits well into the surface. The use of a TX drive T15 ensures a secure and slip-free installation, improving work quality and safety. The packaging unit of 200 pieces enables cost-effective procurement for larger installation projects.
Sales unit: 200 pieces
Lieske Part No.: 367591

General purpose chipboard screw, made of hardened steel, galvanized, half-round head (pan head) with hexagon socket drive. Design: Ø: 4.0 mm, length: 30 mm, for hexagon socket drive: T15, pack of 200.
Sales unit: 200 pieces
Lieske Part No.: 636829

General purpose chipboard screw, made of hardened steel, galvanized, half-round head (pan head) with hexagon socket drive. Design: Ø: 4.0 mm, length: 35 mm, for hexagon socket drive: T15, pack of 200.
Sales unit: 200 pieces
Lieske Part No.: 528069