Installation Material from Cimco

Velcro strap with plastic eyelet, made of woven polyamide, two-tone red/black for easier operation, hook-free strap end for quick opening of the binder, suitable for up to 10,000 openings of the binder, tensile strength 260N/cm, thickness approx. 2 mm (the specified minimum tensile loads apply to at least 50 mm strap overlap)
Sales unit: 10 pieces
Lieske Part No.: 330680

Velcro strap with plastic eyelet, made of woven polyamide, two-tone red/black for easier operation, hook-free strap end for quick opening of the binder, suitable for up to 10,000 openings of the binder, tensile strength 260N/cm, thickness approx. 2 mm (the specified minimum tensile loads apply to at least 50 mm strap overlap)
Sales unit: 10 pieces
Lieske Part No.: 828373

Velcro tape, made of black, extruded polyamide velour laminate, thickness approx. 1.4 mm, self-adhesive back to back, suitable for approx. 200 operations, in addition to the standard color black, white, red, blue, green and yellow are available. Please enquire about minimum order quantity, delivery time approx. 8 weeks, Velcro fastener with tab, cut to fastener dimensions for common electrical installations
Sales unit: 25 pieces
Lieske Part No.: 155804

Velcro ties (Velcro cable tie and holding strip)

• For fastening, attaching, more diverse applications
• Soft, flexible surface for minimal pressure on cable bundles
adhesive velcro technique in any position -

• Easy to close and open, quick to install and no tools required
• High tensile strength and shear strength
• adjustable Read, re-usable many times, low wear, long life
• light, UV-and sweat-proof, water-and salt-water resistant
Klettbandgurt with flap
design: tensile strength 380 N
Band width: 20 mm
Band length: 200 mm Type: 181912


Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 610937
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Velcro tape, made of black, extruded polyamide velour laminate, thickness approx. 1.4 mm, self-adhesive back to back, suitable for approx. 200 operations, in addition to the standard color black, white, red, blue, green and yellow are available. Please enquire about minimum order quantity, delivery time approx. 8 weeks, Velcro fastener with tab, cut to fastener dimensions for common electrical installations
Sales unit: 25 pieces
Lieske Part No.: 413626

Adhesive velcro technique in any position - - Easy to close and open, quick to install and no tools velcro straps (Velcro cable tie and holding strip) - For fastening, attaching, more diverse applications - Soft, flexible surface for minimal pressure on cable bundles - High tensile strength and shear strength - adjustable Read, multiple re-use, low wear, long life - light, UV-and sweat-proof, water-and salt-water resistant Velcro reel execution: Tensile strength N 3 width:
3 mm Band length: 25 m Type:
8
92 Quantity:
ST.
Lieske Part No.: 520296

Velcro tape, made of black, extruded polyamide velour laminate, thickness approx. 1.4 mm, self-adhesive back to back, suitable for approx. 200 activations, in addition to the standard color black, white, red, blue, green and yellow are available. Please enquire about minimum order quantity, delivery time approx. 8 weeks, Velcro tape rolls, roll 25 m long for individual cutting to desired length
Lieske Part No.: 517033

Velcro tape, made of black, extruded polyamide velour laminate, thickness approx. 1.4 mm, self-adhesive back to back, suitable for approx. 200 activations, in addition to the standard color black, white, red, blue, green and yellow are available. Please enquire about minimum order quantity, delivery time approx. 8 weeks, Velcro tape rolls, roll 25 m long for individual cutting to desired length
Lieske Part No.: 307058

Velcro tie (velcro cable ties and -Haltestreifen)

- For fastening, attaching, more diverse applications

- Soft, flexible surface for lowest pressure on cable bundles

- Velcro adhesive technique in any position

- Easy to close and to open, quick to install and no tools required

- High tensile load and shear strength

- Adjustable Read, often reusable, low wear, long life

- Light, UV and sweat-proof, water and salt water resistant

Velcro Reel

Finish: tensile strength 460 N

Bandwidth: 25 mm

Band length: 25 m

Model: 181926 Package: 1 PC.
Lieske Part No.: 742610

Velcro tape, made of black, extruded polyamide velour laminate, thickness approx. 1.4 mm, self-adhesive back to back, suitable for approx. 200 activations, in addition to the standard color black, white, red, blue, green and yellow are available. Please enquire about minimum order quantity, delivery time approx. 8 weeks, Velcro tape rolls, roll 25 m long for individual cutting to desired length
Lieske Part No.: 621119

Cable ties with steel tongue made of polyamide 6.6, with corrosion-resistant, anti-magnetic tongue made of stainless steel 200 X 3.5
Sales unit: 1000 pieces
Lieske Part No.: 298159

Cable ties with steel tongue made of polyamide 6.6, with corrosion-resistant, anti-magnetic tongue made of stainless steel 360x 4.5
Sales unit: 1000 pieces
Lieske Part No.: 1315417

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 1, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 439094

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 2, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 461587

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 3, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 345982

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor N, blue, pieces per sheet: 10, PU: 1.
Lieske Part No.: 524775

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: PE protective conductor, green-yellow, pieces per sheet: 10, PU: 1.
Lieske Part No.: 429986

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor protective function, pieces per sheet: 10, PU: 1.
Lieske Part No.: 577072

Conductor marking, the self-adhesive film signs for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The signs comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, pieces per sheet: 10, PU: 1.
Lieske Part No.: 985053

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature-resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, not in accordance with DIN 40 011, pieces per sheet: 10, PU: 1.
Lieske Part No.: 900621

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 14 mm, pieces per block: 64, length: 75 mm, pack: 1
Lieske Part No.: 537030

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 38 mm, pieces per block: 32, length: 150 mm, pack: 1
Lieske Part No.: 364578

Selbstlaminierende Kabelmarkierer für die einfache, schnelle dauerhafte Kabelkennzeichnung. Kabelmarkierer für die einfache, schnelle und dauerhafte Kabelkennzeichnung.Klare PV 006, selbstklebende Weich-PVC-Folie, 0,08 mm stark. Schützt das Schriftfeld vor mechanischen Einflüssen. Der Markierer besteht aus patentiertem und transparentem Andruckteil, weißem Beschriftungsfeld, transparentem Schutzteil.Temperaturbeständig von -30°C bis +120°C, dauerhafte Klebekraft, hohe UV-Beständigkeit. Resistent gegen Schmutz, Wasser, Alkohol, Öle auf Petroleumbasis. Beschriftbar mit Bleistift, Kugelschreiber, Drucker usw. Taschenverpackung. Ausführung: Schriftfeld: 25x25 mm, Maximaler Kabel-¿ 63 mm, Stück pro Block: 32, Länge: 230 mm, VE: 1
Lieske Part No.: 1093355

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Sheet: 13x21 mm, Maximum cable diameter 7 mm, Pieces per block: 48, Length: 37 mm, PU: 1
Lieske Part No.: 672802

Selbstlaminierende Kabelmarkierer für die einfache, schnelle dauerhafte Kabelkennzeichnung. Kabelmarkierer für die einfache, schnelle und dauerhafte Kabelkennzeichnung.Klare PV 006, selbstklebende Weich-PVC-Folie, 0,08 mm stark. Schützt das Schriftfeld vor mechanischen Einflüssen. Der Markierer besteht aus patentiertem und transparentem Andruckteil, weißem Beschriftungsfeld, transparentem Schutzteil.Temperaturbeständig von -30°C bis +120°C, dauerhafte Klebekraft, hohe UV-Beständigkeit. Resistent gegen Schmutz, Wasser, Alkohol, Öle auf Petroleumbasis. Beschriftbar mit Bleistift, Kugelschreiber, Drucker usw. Taschenverpackung. Ausführung: Bogen: 25x24 mm, Maximaler Kabel-¿ 14 mm, Stück pro Block: 21, Länge: 80 mm, VE: 1
Lieske Part No.: 1096152

Labels for hand-writing, self-adhesive, writable labels made of yellow fabric for marking electrical systems, equipment labeling, warehouse and item labeling. Easy to write on with pencil, ballpoint pen and typewriter. Self-adhesive PVC-impregnated fabric in yellow with black border, 0.15 mm thick. Temperature resistant from -30°C to +80°C, good adhesive strength, ageing-resistant. Design: Pieces per card: 40, dimensions: 11x19 mm. PU: 1.
Lieske Part No.: 479960

Test stickers Test stickers are used as part of quality assurance (QA) DIN ISO 9000 ff and, for example, for legally required inspections and accident prevention (UVV). This applies in particular to the monitoring of test equipment, devices and systems as well as important supply lines (cables, pipes). You have two options for attaching the test stickers: directly on the device being tested or on one of the basic stickers offered, which is stuck onto the device. The test date is marked with a pen or notching pliers. The test stickers are made of forgery-proof document film, i.e. to protect against misuse, the sticker is irreversibly destroyed if anyone tries to remove it. Properties of the document film: The document film can be written on with a pencil, ballpoint pen, fiber pen or typewriter. It is 0.05 mm thick and is temperature-resistant from 30 degrees C to +80 degrees C. The adhesive strength is higher than the tear resistance of the film. It breaks when removed and is largely resistant to aging, weathering and light. It is also resistant to water, sea water, alcohol, aliphatic solvents and petroleum-based oils and fats. Flash red
Lieske Part No.: 906320

Basic labels - The self-adhesive basic label is made of white, writable plastic film that can be stuck on multiple times. It adheres well to clean surfaces and is destroyed when removed. The document film is resistant to water, aliphatic solvents and petroleum-based oils and fats. Design: Pieces per booklet: 25, dimensions: 92x40 mm, pack size: 1.
Lieske Part No.: 131374

Lieske Part No.: 1101509

Shrink-fit connection sleeves for press connectors or screw connectors 1KV. Thick-walled electrical shrink sleeves (heat shrinking) with excellent mechanical strength, chemical resistance and electrical properties. Internal coating with hot-melt adhesive, therefore excellent protection against water and moisture. For the long-term connection of plastic cables in the ground as well as on cable trays or outdoors. Resistant to environmental influences, e.g. UV rays, ozone, oxygen, acids, alkaline earths. Design: Type: 1.5-6/3, conductor cross-section: 3x1.5 to 6 mm², cable Ø: 11-18 mm, hose length: 200x60 mm, PU: 1
Lieske Part No.: 1983502

Shrink-fit connection sleeves for press connectors or screw connectors 1KV. Thick-walled electrical shrink sleeves (heat-shrinking) with excellent mechanical strength, chemical resistance and electrical properties. Internal coating with hot-melt adhesive, therefore excellent protection against water and moisture. For the long-term connection of plastic cables in the ground as well as on cable trays or outdoors. Resistant to environmental influences, e.g. UV rays, ozone, oxygen, acids, alkaline earths. Design: Type: 1.5-6/5, conductor cross-section: 5x1.5 to 6 mm², cable Ø: 13-21 mm, hose length: 200x60 mm, PU: 1
Lieske Part No.: 974284

Shrink connection sleeves for press connectors or screw connectors 1KV. Thick-walled electrical shrink sleeves (heat shrinking) with excellent mechanical strength, chemical resistance and electrical properties. Internal coating with hot melt adhesive, therefore excellent protection against water and moisture. For the long-term connection of plastic cables in the ground as well as on cable trays or outdoors. Resistant to environmental influences, e.g. UV rays, ozone, oxygen, acids, alkaline earths. Design: Type: 6-25, conductor cross-section: 4x6 to 25 mm², cable Ø: 16-32 mm, hose length: 450x100 mm, PU: 1
Lieske Part No.: 300622

Polyolefin Wärmeschrumpfschlauch dünnwandig 3:1, halogenfrei und flexibel, flammwidrig (VW-1/UL224). Technische Daten: Längsschrumpf <5%, Dauertemperatur: -45 bis 125°C, Schrumpftemperatur: 120°C, Durchschlagfestigkeit: 15 kV/mm (IEC243),Durchgangswiderstand: 1014 Ohm x cm (IEC93),Zugfestigkeit: 10,4 MPa (ASTM D2671), Reißdehnung: 200% (ASTM D2671). Ausführung: ¿-vorher: 12,0 mm, ¿-nachher: 4,0 mm, Farbe: schwarz, Wanddicke: 0,75 mm, Länge: 5 m, 1 Box.
Lieske Part No.: 1296473

Polyolefin Wärmeschrumpfschlauch dünnwandig 3:1, halogenfrei und flexibel, flammwidrig (VW-1/UL224). Technische Daten: Längsschrumpf <5%, Dauertemperatur: -45 bis 125°C, Schrumpftemperatur: 120°C, Durchschlagfestigkeit: 15 kV/mm (IEC243),Durchgangswiderstand: 1014 Ohm x cm (IEC93),Zugfestigkeit: 10,4 MPa (ASTM D2671), Reißdehnung: 200% (ASTM D2671). Ausführung: ¿-vorher: 18,0 mm, ¿-nachher: 6,0 mm, Farbe: schwarz, Wanddicke: 0,85 mm, Länge: 5 m, 1 Box.
Lieske Part No.: 1296474

Polyolefin heat shrink tubing, thin-walled 3:1, halogen-free and flexible, flame-retardant (VW-1/UL224). Technical data: Longitudinal shrinkage <5%, continuous temperature: -45 to 125°C, shrink temperature: 120°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671), elongation at break: 200% (ASTM D2671). Design: Ø before: 39.0 mm, Ø after: 13.0 mm, color: black, wall thickness: 1.50 mm, length: 1 m, 1 piece.
Lieske Part No.: 1955648

Polyolefin heat shrink tubing, thin-walled 3:1, black, halogen-free and flexible, flame-retardant (VW-1/UL224), with internal adhesive. Technical data: Longitudinal shrinkage <8%, continuous temperature: -45 to 125°C, shrink temperature: 120°C, dielectric strength: 2.5 kV/mm (UL224), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671), elongation at break: 300% (ASTM D2671). Design: Ø before: 12.7 mm, Ø after: 4.2 mm, color: black, wall thickness: 1.20 mm, length: 1.22 m, 5 pieces. Other shrink tubing available on request!
Sales unit: 5 pieces
Lieske Part No.: 1989847

Polyolefin heat shrink tubing, thin-walled 3:1, black, halogen-free and flexible, flame-retardant (VW-1/UL224), with internal adhesive. Technical data: Longitudinal shrinkage <8%, continuous temperature: -45 to 125°C, shrink temperature: 120°C, dielectric strength: 2.5 kV/mm (UL224), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671), elongation at break: 300% (ASTM D2671). Design: Ø before: 19.1 mm, Ø after: 6.3 mm, color: black, wall thickness: 1.40 mm, length: 1.22 m, 5 pieces. Other shrink tubing available on request!
Sales unit: 5 pieces
Lieske Part No.: 1989848

Grommet with through hole, PVC, 4/8/11-1, 5
Sales unit: 100 pieces
Lieske Part No.: 162805

Grommet with through hole, PVC, 6/9/12-1
Sales unit: 100 pieces
Lieske Part No.: 162925

Grommet with through hole, PVC, 6/9/12-4
Sales unit: 100 pieces
Lieske Part No.: 162956

Grommet with through hole, PVC, 6/9/12-1, 5
Sales unit: 100 pieces
Lieske Part No.: 163264

Grommet with through hole, PVC, 16/22/27-1
Sales unit: 100 pieces
Lieske Part No.: 163711

Anti-kink sleeve, PVC, black, 20 x 58
Sales unit: 100 pieces
Lieske Part No.: 1347396

Strain relief clamp 24 x15
Sales unit: 100 pieces
Lieske Part No.: 1987863

Cable ties made of stainless steel AiSi 316 (DiN 1.4401), with ball lock. Corrosion and radiation resistant, antimagnetic. Extremely resistant to aggressive chemicals. Steel thickness 0.26 mm (width 4.6/7.9 mm) or 0.32 mm (width 12 mm). Additional features of the black version: Polyester coating, UV-stabilized and halogen-free. Temperature resistance: -80 °C to +538 °C (natural) or -80°C to +538/150°C (black, steel/polyester). Certification: UL, DNV, LR. WxL 4.6x100 mm, cable harness max. 20 mm, minimum tensile strength 550 N
Sales unit: 100 pieces
Lieske Part No.: 641157

Cable ties made of stainless steel AiSi 316 (DiN 1.4401), with ball lock. Corrosion and radiation resistant, antimagnetic. Extremely resistant to aggressive chemicals. Steel thickness 0.26 mm (width 4.6/7.9 mm) or 0.32 mm (width 12 mm). Additional features of the black version: Polyester coating, UV-stabilized and halogen-free. Temperature resistance: -80 °C to +538 °C (natural) or -80°C to +538/150°C (black, steel/polyester). Certification: UL, DNV, LR. WxL 4.6x150 mm, cable harness max. 44 mm, minimum tensile strength 550 N
Sales unit: 100 pieces
Lieske Part No.: 149946

Cable ties made of stainless steel AiSi 316 (DiN 1.4401), with ball lock. Corrosion and radiation resistant, antimagnetic. Extremely resistant to aggressive chemicals. Steel thickness 0.26 mm (width 4.6/7.9 mm) or 0.32 mm (width 12 mm). Additional features of the black version: Polyester coating, UV-stabilized and halogen-free. Temperature resistance: -80 °C to +538 °C (natural) or -80°C to +538/150°C (black, steel/polyester). Certification: UL, DNV, LR. WxL 4.6x200 mm, cable harness max. 50 mm, minimum tensile strength 550 N
Sales unit: 100 pieces
Lieske Part No.: 361847

Cable ties made of stainless steel AiSi 316 (DiN 1.4401), with ball lock. Corrosion and radiation resistant, antimagnetic. Extremely resistant to aggressive chemicals. Steel thickness 0.26 mm (width 4.6/7.9 mm) or 0.32 mm (width 12 mm). Additional features of the black version: Polyester coating, UV-stabilized and halogen-free. Temperature resistance: -80 °C to +538 °C (natural) or -80°C to +538/150°C (black, steel/polyester). Certification: UL, DNV, LR. WxL 4.6x290 mm, cable harness max. 75 mm, minimum tensile strength 550 N
Sales unit: 100 pieces
Lieske Part No.: 688487

Cable ties made of stainless steel AiSi 316 (DiN 1.4401), with ball lock. Corrosion and radiation resistant, antimagnetic. Extremely resistant to aggressive chemicals. Steel thickness 0.26 mm (width 4.6/7.9 mm) or 0.32 mm (width 12 mm). Additional features of the black version: Polyester coating, UV-stabilized and halogen-free. Temperature resistance: -80 °C to +538 °C (natural) or -80°C to +538/150°C (black, steel/polyester). Certification: UL, DNV, LR. WxL 4.6x360 mm, cable harness max. 102 mm, minimum tensile strength 550 N
Sales unit: 100 pieces
Lieske Part No.: 356749

Cable ties made of stainless steel AiSi 316 (DiN 1.4401), with ball lock. Corrosion and radiation resistant, antimagnetic. Extremely resistant to aggressive chemicals. Steel thickness 0.26 mm (width 4.6/7.9 mm) or 0.32 mm (width 12 mm). Additional features of the black version: Polyester coating, UV-stabilized and halogen-free. Temperature resistance: -80 °C to +538 °C (natural) or -80°C to +538/150°C (black, steel/polyester). Certification: UL, DNV, LR. WxL 4.6x520 mm, cable harness max. 152 mm, minimum tensile strength 550 N
Sales unit: 25 pieces
Lieske Part No.: 1013498