Accessories from Cimco

Alpa-Gel - The simple solution to protect cable connections from dust and moisture (IP 68). Once the gel has hardened, it can be removed at any time without leaving any residue. The solvent-free 2-component silicone gel in a 1:1 mixing ratio and a dielectric strength of 20 KV/mm is supplied with a mixing cup, mixing spatula and disposable gloves in 2 different container sizes. 250 ml
Lieske Part No.: 749013

The Cimco Alpa-Gel 151012 is a solvent-free, two-component silicone gel for protective potting of cable connections. It provides sealing against dust and moisture and ensures a protection rating of IP 68, which includes high resistance to water and dust. The product is specifically designed for use in electrical and installation technology, where reliable insulation and long-term stability of connections are required. The gel hardens after mixing and can be removed completely without residue at any time, enabling flexible maintenance and repair.

Applications
Alpa-Gel is primarily used for protective potting of electrical cable connections, especially in environments with increased humidity or dust exposure. It is suitable for outdoor use as well as in industrial facilities, where permanent insulation and mechanical stability of connections are necessary. Applications include sealing of plug connections, cable entries, or in electrical enclosures.

Functions and Equipment in Detail
The gel consists of two components processed in a 1:1 mixing ratio. Curing occurs after mixing, resulting in a mass with high electrical insulation. The dielectric strength is 20 kV/mm, ensuring high electrical strength and safety at high voltages. The solvent-free formulation prevents the release of solvents and ensures clean, environmentally friendly processing.

Technology Explained Simply
The silicone gel is supplied in a 1000 ml package containing the two components in separate containers. Processing involves mixing the components in a 1:1 ratio, after which curing begins. The resulting mass is elastic and remains flexible over a long period, allowing adaptation to thermal expansions and mechanical stresses. The IP 68 protection rating means the gel remains functional even under immersion conditions in water up to 1.5 m depth and under pressure loads up to 150 kPa (approximately 15 m water column). The residue-free removability enables maintenance without damaging underlying components.

Compatibility and Accessories
Alpa-Gel is supplied with a mixing cup, a mixing spatula, and a disposable glove to facilitate processing. These accessories are included in the delivery scope and serve for hygienic and precise mixing of the two components.

Installation and Mounting
Installation involves mixing the two components in a 1:1 ratio, ensuring the mixture is thoroughly homogenized. The gel is then poured into the connection to be protected and cures. Processing should take place in a clean, dust-free environment to ensure the quality of the potting mass.

Advantages in Operation
Alpa-Gel provides a durable, flexible, and highly electrically insulating protective layer. The residue-free removability allows maintenance without damaging components. The IP 68 protection rating ensures high reliability in humid and dusty environments. The solvent-free formulation reduces the risk of evaporation and environmental impact. The inclusion of a mixing cup, mixing spatula, and disposable glove simplifies processing and ensures clean application.
Lieske Part No.: 181427

Alpa-Gel - The simple solution to protect cable connections from dust and moisture (IP 68). Once the gel has hardened, it can be removed at any time without leaving any residue. The solvent-free 2-component silicone gel in a 1:1 mixing ratio and a dielectric strength of 20 KV/mm is supplied with a mixing cup, mixing spatula and disposable gloves in 2 different container sizes. Large container without mixing cup, mixing spatula and disposable gloves. 10,000 ml
Lieske Part No.: 816857

Compressed air spray, removes dust and loose dirt without leaving any residue and thus allows dry, contact-free cleaning even in inaccessible corners and sensitive surfaces on electronic devices, magnetic heads, cameras, clockworks, model making, measuring technology, etc. Spray can, 400 ml.
Lieske Part No.: 562082

All-round spray - high-performance care and maintenance product for all applications in industry, trade, household and hobby, acts as corrosion protection on metal parts, as penetrating oil (rust remover, eliminates squeaking and creaking noises), as a water displacer, as a lubricant and as a cleaner (also oil, grease, tar and adhesive residue), leaves a long-lasting film that does not smear or stick. Ideal for use in electrical engineering and electronics as an anti-condensation agent on circuit boards, as a contact spray for generators and magnetic switches. Spray can, 400 ml.
Lieske Part No.: 626921

Wet.Protect protects against short circuits, failures and corrosion caused by moisture and humidity, penetrates the moisture and forms a permanent protective film, maintains conductivity and increases the service life of the treated parts, can be used preventively or for repairs directly after exposure to moisture. Only to be applied when the power is off. For use in industry, trade and private households. Version: e.basic, content 50 ml.
Lieske Part No.: 537440

Wet.Protect protects against short circuits, failures and corrosion caused by moisture and humidity, penetrates the moisture and forms a permanent protective film, maintains conductivity and increases the service life of the treated parts, can be used preventively or for repairs directly after exposure to moisture. Only to be applied when the power is off. For use in industry, trade and private households. Version: e.basic, content 200 ml.
Lieske Part No.: 780281