Cimco 142152 cable puller sleeve for cable Ø 6–9 mm internal thread M5 content_copy

The Cimco cable puller sleeve type 142152 is a specially developed aid for cable pulling into conduits, particularly for cables with a diameter of 6 to 9 mm. It is offered under the brand Katimex® and serves as a connecting element between the cable and a cable pulling device to facilitate the pulling process. The sleeve features an internal thread M5, designed for securing to suitable cable pulling devices or accessories. It is equipped with a twist compensation system that prevents the cable from twisting or deforming during pulling, which is particularly advantageous for longer installation runs.

Applications

The cable puller sleeve is designed for use in electrical and IT installation technology, where cables must be installed in conduits or shafts. It is especially suitable for installing data cables, building automation cabling, or electrical installation cables with a diameter range of 6 to 9 mm. It is used in conjunction with cable pulling devices such as the Kati-Blitz 30 m or 50 m, which are also available in the range. The combination enables efficient and damage-free cable installation, particularly in narrow or long installation runs.

Functions and Features in Detail

The sleeve is fitted with an internal thread M5, enabling a secure and torque-resistant connection to cable pulling devices or other accessories. The integrated twist compensation system ensures that the torsional forces generated during pulling are not transferred to the cable. This minimizes the risk of cable twisting or damage. The design ensures a secure grip on the cable without damaging its surface. The fit for cable diameters of 6 to 9 mm ensures universal usability within this range.

Technology Explained Simply

The twist compensation in the sleeve operates through a special mechanical design that absorbs and neutralizes the rotational movement generated during pulling. This is particularly important when cables are pulled over long distances, as otherwise the rotation of the pulling device or accessories could be transferred to the cable, causing twisting. The internal thread M5 allows mounting to standard connection points on cable pulling devices. The material selection ensures high strength and durability, even with repeated use.

Compatibility and Accessories

The cable puller sleeve is specifically designed for use with cable pulling devices of the Kati-Blitz type, particularly the 30 m and 50 m models. These devices are available in the range and enable cable installation over long distances. The combination of cable puller sleeve and Kati-Blitz device forms a complete system for cable pulling. It is recommended to use matching accessories together to maximize the efficiency and safety of the installation work.

Installation and Mounting

Installation is performed by sliding the sleeve onto the cable and then securing it to the cable pulling device via the internal thread M5. The cable should be positioned so that it sits securely in the sleeve and does not slip. The connection must be tight and torque-resistant to ensure a safe pulling operation. The pulling is then carried out using the cable pulling device, with the twist compensation neutralizing torsional forces.

Operational Advantages

Using the cable puller sleeve reduces the risk of cable damage due to twisting or friction. Installation is faster and more controlled, especially in complex or long runs. Use in combination with Kati-Blitz devices enables professional and efficient work. The robust construction ensures a long service life and reusability, increasing cost-effectiveness. The fit for cable diameters of 6 to 9 mm makes the sleeve a universally applicable tool in electrical and IT installation technology.

General
Cable diameter	6-9 mm
Internal thread	M5
Product type	Cable pulling sleeve
Compatibility	Kati-Blitz 30 m, Kati-Blitz 50 m
Twist compensation

---