Chauvin Arnoux P01297013 10 pcs fuse flink 8 A (380 V / 50 kA / 6x32 mm) content_copy

These fuses from Chauvin Arnoux are specifically designed for the protection of measuring instruments of type C.A 10. They serve as protective components against overcurrents and are designed for use in electrical installations where reliable protection of measuring instruments is required. The fuses are available in a set of 10 pieces and are particularly suitable for replacement needs or as a reserve stock for maintenance and servicing.

Applications
These fuses are intended for use in measuring instruments of type C.A 10. They protect these devices from damage caused by current overloads, which may occur due to short circuits or other network disturbances. Due to their technical specifications, they are suitable for applications requiring a rated voltage of 380 V and a high breaking capacity of 50 kA. The compact dimensions of 6 x 32 mm allow for easy installation in standard fuse holders.

Functions and Equipment in Detail
The fuses have a rated current of 8 A, meaning they can operate normally with a current flow of up to 8 amperes without tripping. The tripping characteristic is defined as fast, indicating a rapid response to short-term current overloads. This is particularly important to protect sensitive measuring instruments from short-term but damaging current surges. The breaking capacity of 50 kA ensures that the fuse will safely and completely interrupt the circuit even under high short-circuit currents, without failing.

Technology Explained Simply
The term fast describes a tripping characteristic where the fuse reacts quickly upon exceeding the rated current, without a slow thermal equilibrium occurring. This is typical for fuses used in electronic devices, where rapid protection is necessary to prevent damage to sensitive components. The rated voltage of 380 V specifies that the fuse is designed for operating voltages up to this value. The breaking capacity of 50 kA indicates the amount of current the fuse can safely interrupt without melting or exploding.

Compatibility and Accessories
The fuses are specifically developed for measuring instruments of type C.A 10. They are not intended for other devices or applications unless the technical specifications (rated current, voltage, dimensions) match exactly.

Mounting and Installation
The fuses are manufactured in standard dimensions of 6 x 32 mm, enabling direct insertion into corresponding fuse holders. Installation is carried out by inserting the fuse into the designated holder within the measuring instrument. No additional tools or mounting aids are required, as the fuses mechanically fit into the holder. Mounting is performed during maintenance or when replacing a defective fuse.

Advantages in Operation
The fuses provide reliable protection for measuring instruments of type C.A 10. The combination of fast tripping behavior, high rated voltage, and high breaking capacity ensures secure protection even under demanding conditions. The set of 10 pieces enables efficient stock management, ensuring the availability of replacement fuses without requiring a new order for each failure. The compact design facilitates handling and replacement.

General
Rated voltage	380 V
Switching capacity	50 kA

---