Chauvin Arnoux P01295272 Ampflex connection cable BNC-BNC (15 m) content_copy

This product is a BNC/BNC connection cable from the brand Chauvin Arnoux, specifically designed as a replacement part for AmpFLEX current transformers connected to the Pylon Box C.A 6474. It enables secure and reliable transmission of measurement signals between flexible current transformers and the grounding Pylon module CA 6474. The cable connection allows for flexible installation, as the sensors can be positioned at various locations within the measurement area, while the central measurement station remains at a fixed location.

Applications
This cable is intended for use in industrial and technical applications, particularly in the field of electrical measurement technology, where flexible current transformers are used to measure alternating and direct current in grounding systems or other electrical systems. The Pylon Box C.A 6474 serves as a central interface for data acquisition and transmission, with the cable establishing the connection between the mobile sensor and the stationary unit. It is suitable for installations where spatial separation between the measurement point and the measuring device is required.

Functions and Equipment in Detail
The cable features two BNC connectors at both ends, ensuring secure and interference-free signal transmission. The BNC connector is widely used in measurement technology and provides a stable mechanical connection as well as good electrical contact quality. The cable length is 15 meters, offering sufficient reach for many application scenarios. The maximum connection length achievable with this cable is up to 30 meters, depending on specific requirements and signal quality.

Technology Explained Simply
The use of a BNC/BNC cable enables a direct and interference-free connection between the AmpFLEX current transformer and the Pylon Box C.A 6474. The BNC connectors ensure that the measurement signal is transmitted without losses or interference. The cable is black in colour, making it visually inconspicuous and protecting it against UV radiation and mechanical influences. The 15-meter length provides sufficient flexibility for installation without requiring additional extensions.

Compatibility and Accessories
The cable is specifically developed for use with AmpFLEX current transformers and the Pylon Box C.A 6474. It is designed as a replacement part, allowing it to be used in case of wear or damage to the original cable. Compatibility is limited to this specific combination; it is not intended for other devices or systems.

Installation and Mounting
Installation is carried out by simply plugging the BNC connectors into the corresponding ports of the AmpFLEX current transformer and the Pylon Box C.A 6474. No additional mounting or tools are required. The connection is mechanically stable and can be used under normal operating conditions without additional fastening. Cable routing should be planned to avoid mechanical stress and damage.

Advantages in Operation
The use of this cable enables flexible and reliable measurement, without restricting the position of the current transformer due to the position of the Pylon Box C.A 6474. The BNC connection ensures stable signal transmission, which remains reliable even over lengths exceeding 15 meters. The cable is available as a replacement part, simplifying maintenance and servicing of measurement systems and increasing operational readiness.