Chauvin Arnoux P01191739Z CA 702 pocket multimeter content_copy

The compact pocket multimeter CA 702 from Chauvin Arnoux is a portable measuring instrument for mobile use in electrical installations. It features permanently connected test leads, ensuring immediate readiness for use, and is ideal for pockets or tool kits due to its compact dimensions of 104 x 55 x 32.5 mm and a weight of 145 g. The device is designed for electricians, technicians, and DIYers who require reliable and fast measurement of voltages, resistances, and continuity.

Applications
This multimeter is suitable for measuring direct and alternating voltages in electrical installations, particularly in areas with installation categories of 600 V CAT IV and 1000 V CAT III according to IEC 61010. It is frequently used in residential and commercial electrical work to check voltages, measure resistances, test continuity, and check diodes. The non-contact voltage detection allows for quick identification of live conductors without physical contact.

Functions and Equipment in Detail
The device offers a wide range of measurement functions: Voltage measurement covers ranges from 200 mV to 600 V for both direct and alternating voltages. Resistance measurement ranges from 200.0 Ω to 20.00 MΩ, with accuracy varying by range between ±0.8 % L + 5 D (at 200.0 Ω) and ±10.0 % L + 5 D (at 20.00 MΩ). Continuity testing is indicated by an audible signal (beeper), activated when resistance is below approximately 60 Ω. The diode test detects diodes with a test signal up to 1.999 V, with current limited to a maximum of 1 mA. An integrated torch supports work in poorly lit areas.

Technology Explained Simply
The multimeter features a digital display with 2000 points, enabling high resolution for precise readings. Range selection is automatic (AUTORANGE), so the user does not need to make manual adjustments. Voltage measurement accuracy is ±0.5 % L + 3 D for direct voltage in the range of 200 mV to 600 V, and ±1.0 % L + 8 D for alternating voltage up to 20.00 V. For higher alternating voltages (200.0 V to 600 V), accuracy is ±2.3 % L + 10 D. Measurements are taken via permanently attached test leads, which cannot be lost and enable quick deployment. Power supply is provided by two 1.5 V LR03 batteries.

Compatibility and Accessories
The device is designed for use in electrical installations with safety categories of 600 V CAT IV and 1000 V CAT III. Suitable accessories available in the range include a carrying case, which improves protection and portability of the device.

Mounting and Installation
The multimeter requires no mounting or installation. It is simply held in hand and connected to the measurement points via the permanently attached test leads. Operation is performed using the buttons on the device, with automatic range selection simplifying use.

Operational Advantages
Operation of the CA 702 is simple and fast. The permanently integrated test leads and automatic range selection reduce preparation time. The integrated torch and non-contact voltage detection increase safety and efficiency during work. Compliance with IEC 61010 for installation categories 600 V CAT IV and 1000 V CAT III ensures safe use in electrical installations. The device is suitable for use in electrical installations, maintenance work, and troubleshooting in circuits.

Scope of Delivery
The device is delivered with permanently connected test leads and an operating manual.

Standards and Safety
The device complies with IEC 61010 and is designed for use in electrical installations with installation categories of 600 V CAT IV and 1000 V CAT III. These safety categories ensure safe operation when measuring in electrical installations. The maximum test voltage is 600 Vrms, which is sufficient for use in residential and commercial installations.

Eigenschaften
Flashlight	Ja Ja
Dimensions / weight	104 x 55 x 32,5 mm / 145 g
Voltage detection without contact

---