Busch Jaeger 2CKA001611A0169 4310/6EUJ-214 combination socket outlet/rocking switch Reflex SI alpine white content_copy

The article 4310/6 EUJ-214 from Busch Jaeger is a flush-mounted combination switch, consisting of a socket outlet and a toggle switch, from the Reflex SI design line. It is intended for electrical supply and switching of consumers in indoor environments. The combination allows simultaneous use of a Schuko socket outlet and a switch in a single device, thus saving space in the enclosure and simplifying installation. The device is finished in white, corresponding to RAL number 9010, and features a glossy surface. It is designed for single mounting, with no combination with other modules in a frame being possible.

Applications
This switch is suitable for use in residential and commercial buildings where a combination of socket outlet and switch is required. The protection rating IP20 safeguards against contact with fingers or similar objects and is designed for indoor use. The rated voltage is 250 V, matching the standard voltage in Germany. The rated current of the switch is 16 A, while the toggle switch itself is rated for 10 A. Therefore, the socket outlet is designed for a higher load than the switch, which must be considered when planning consumers.

Functions and Equipment in Detail
The socket outlet features a single Schuko socket outlet, equipped with connection terminals according to VDE 0620. These terminals enable a secure and reliable connection of the conductors. The integrated toggle switch allows for off and changeover switching, making it suitable for various switching configurations in installations. Mounting is achieved via claw or screw fastening, enabling flexible installation in various flush-mounted distribution boxes. The device is made of thermoplastic, a robust plastic commonly used for electrical components in indoor applications.

Technology Explained Simply
The connection terminals according to VDE 0620 ensure a safe and standard-compliant connection of electrical conductors. The terminals are designed to provide a secure connection even with different conductor cross-sections. The protection rating IP20 means the device is protected against entry of solid foreign objects with a diameter of at least 12.5 mm, ensuring touch protection. The surface is untreated and glossy, allowing for easy cleaning and an attractive appearance. The device is not halogen-free, which must be considered during disposal and in case of fire.

Compatibility and Accessories
The device is part of the Reflex SI and Busch-balance® SI design lines, ensuring visual harmony with other products in this series. However, it is only intended for single mounting, meaning it cannot be mounted in combination with other modules in a frame. The combination of socket outlet and switch is designed for use in standard installations, with the socket outlet rated for 16 A and the switch for 10 A. The number of active contacts is two, with no flat contacts present.

Mounting and Installation
Mounting is performed using the flush-mounted method, with the device installed into a suitable distribution box. Fastening is done via claw or screw mounting, depending on the system available in the distribution box. The device dimensions are 81 mm (width), 81 mm (height), and 42 mm (depth), which must be considered when planning the distribution box. Installation must comply with applicable regulations and standards, particularly VDE 0620 for the connection terminals.

Operational Advantages
The combination of socket outlet and switch in a single device reduces the number of required modules and simplifies installation. The use of connection terminals according to VDE 0620 ensures a secure and reliable connection. The glossy white surface fits aesthetically into many indoor environments. The rated current of 16 A for the socket outlet allows use even for high-power devices, while the switch is rated for 10 A, which is sufficient for most household appliances. Single mounting ensures a clear and organized installation without additional frame modules.

General
Number of socket outlets	1
Type of fastening	Mounting with claw and screw
Mounting method	Flush mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Glossy
Colour	White
RAL-number (akin)	9010
Suitable for degree of protection (IP)	IP20
Nominal voltage	250
Rated current	16
Number of active Pins (round)	2
Number of active Pins (flat)	0
Width of device	81
Height of device	81
Depth of device	42
With lighting
Halogen free
With miniature fuse
IFTTT support available

---