BlackBox MED101A INDUSTRIAL DIN RAIL VIA FIBER OPTICS FIBER OPTIC RS232 / 422/485 to 115.2Kbps multimode ST DPX DC supply

INDUSTRIAL DIN RAIL VIA FIBER OPTICS FIBER OPTIC RS232 / 422/485 to 115.2Kbps multimode ST DPX DC supplyIndustrial Converters, Repeaters, and Line Drivers

DIN Rail Housing, Three-Way Isolation, and Wide Temperature Range

Three-way isolation, 2000V input/output.
Extended temperature range from -40 to +85°C.
Warranty: 5 Years Double Diamond™ (Standard)

Products:

ICD107A: Industrial RS-422/RS-485 Repeater

• Optical isolation and 600 W surge protection.
• Extends connection up to 1,200 meters.
• Supports up to 32 nodes in an RS-485 circuit.
• Configurable: one side as RS-422 and the other as RS-485 for connecting 4-wire RS-422 to 2-wire RS-485.
• Compatible with Modbus ASCII and RTU.
• “Automatic Send Data Control” for driverless transmission.

MED101A: Industrial RS-232/V.24/RS-422/RS-485 <-

Multimode Fiber Line Driver

• Half/full-duplex communication over two multimode ST fibers.
• Maximum distance: 4 km.
• Data rates: RS-232 up to 115.2 Kbps, RS-422/RS-485 up to 460.8 Kbps.
• Operates in fiber ring and RS-485 multidrop mode.
• Compatible with Modbus ASCII and RTU.
• Removable terminal blocks for easy setup.

MED102A: Industrial RS-232/V.24/RS-422/RS-485 <-

Singlemode Line Driver

• Extends communication over duplex singlemode fibers up to 15 km.
• Supports serial data rates up to 115.2 Kbps.
• Operates in fiber ring and RS-485 multidrop mode.
• Modbus ASCII and RTU-compatible.
• Removable terminal blocks for simplified installation.

Technical Specifications:

Maximum Distance:

• ICD107A: up to 1.2 km
• MED101A: up to 4 km
• MED102A: up to 15 km

Environmental Conditions:

• Temperature range: -40 to +85°C
• Relative humidity: up to 95%, non-condensing

Operating Modes:

• ICD107A: RS-422: full-duplex; RS-485: 2-wire half-duplex or 4-wire full-duplex
• MED101A: RS-232/V.24 and RS-422/RS-485: half/full-duplex; Fiber: multimode, asynchronous
• MED102A: RS-232/V.24 and RS-422/RS-485: half/full-duplex; Fiber: singlemode, asynchronous

Data Rates:

• ICD107A: 2400 bit/s to 115.2 Kbps, DIP-switch selectable up to 460.8 Kbps
• MED101A: RS-232/V.24 up to 115.2 Kbps; RS-422/RS-485 up to 460.8 Kbps
• MED102A: up to 115.2 Kbps

Connections:

• ICD107A: (2) 5-pin terminal block
• MED101A: (2) 5-pin terminal block, (1) ST pair
• MED102A: (1) 2-pin terminal block, (1) 5-pin terminal block, (1) SC pair singlemode

Power Supply:

• +10 to 48VDC (+/-20%) or optional 12VDC power supply for DIN rail (PSD100-R2)

Dimensions:

• ICD107A: 9.9(H) x 7.4(W) x 2.3(D) cm
• MED101A: 12.4(H) x 11.4(W) x 3.3(D) cm
• MED102A: 8.9(H) x 3(W) x 12.8(D) cm