Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

projector bulbs from Benq

Manufacturer no. Description Price Anzahl Bestellen
BenQ projector lamp MP620 Whitebox
This replacement lamp is designed for use in projectors manufactured by Benq, specifically for the MP620 model. It is a Whitebox lamp intended as a replacement for the original projector lamp when it has reached the end of its service life or shows reduced performance. The lamp is identified by the manufacturer's number CS.5JJ1K.001 and is rated for a nominal power of 200 watts, which is required for the typical light output and operating conditions in projectors of this series. The Whitebox lamp is not marked with a specific brand logo, but is designed as a universal replacement part that performs the same function as the original lamp.

Replacement lamp for projectors is a central component in the maintenance and servicing of projector devices. The service life of a projector lamp typically amounts to several thousand operating hours, with the exact duration depending on usage patterns and operating conditions. When the end of life is reached, replacement is necessary to maintain image quality and projection performance. The lamp is developed for use in projectors of the type Benq MP620, with compatibility tailored to the specific model designation and internal lamp unit.

Technical features of the lamp include a nominal power of 200 watts, which is required to generate sufficient light intensity in the projection area. The lamp is intended as a replacement part for the Benq MP620 and is identified under the manufacturer's number CS.5JJ1K.001. The Whitebox designation means that this is a generic replacement part without brand identification, but it meets the technical specifications of the original lamp. The lamp is not supplied with additional components such as cables, adapters, or mounting aids; it is delivered as a single replacement part.

Compatibility and accessories are limited to use in projectors of the Benq MP620 model. The lamp is not intended for other projector models or manufacturers, as the mechanical and electrical adaptation is specific to the device. The installation process requires removing the old lamp from the projector housing and inserting the new lamp into the designated holder. Mounting is done without additional tools, as the lamp is typically secured in the device by screwing or clamping mechanisms.

Functions and equipment in detail include light generation via a high-performance discharge lamp, designed for projecting images and videos onto large surfaces. The lamp produces bright, even light that is focused onto the projection surface through the projection lens. Operating conditions require sufficient cooling, which is why projectors are equipped with fans and cooling channels that must also be considered during installation of the new lamp.

Advantages in operation include restoring the original image quality and brightness of the projector. Replacing the lamp extends the service life of the device and avoids the need for a complete replacement. The Whitebox lamp offers a cost-effective alternative to the original lamp without neglecting technical requirements for performance and compatibility. The delivery time for projector lamps is typically around 1 to 3 weeks, so timely ordering is recommended to avoid operational interruptions.

Installation and mounting is carried out by removing the old lamp from the projector housing, with the exact procedure depending on the specific model. The new lamp is inserted into the holder and mechanically secured. After installation, a check of correct positioning and connection is required to ensure the lamp functions properly. Installation does not require special tools, but caution should be taken to avoid touching the lamp to prevent contamination or damage.

The lamp is not supplied with additional components such as cables, adapters, or mounting aids; it is delivered as a single replacement part. The installation process requires removing the old lamp from the projector housing and inserting the new lamp into the designated holder. Mounting is done without additional tools, as the lamp is typically secured in the device by screwing or clamping mechanisms.
Lieske Part No.: 834378
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
117,60 EUR
BenQ projector lamp MP620P Whitebox
This replacement lamp is designed for use in projectors manufactured by Benq, specifically for the MP620P model. It is a white box lamp serving as a direct replacement for the original lamp with manufacturer part number 5J.J1S01.001. The lamp has a rated power of 200 watts and is designed for light generation in the projection device. It is delivered in a simple, functional packaging type that presents the technical core of the product without additional packaging elements.

Replacement lamp for projectors is a central component of maintenance and servicing of projector devices. With an average lifespan of approximately 1000 to 2000 operating hours depending on usage and environmental conditions, replacement is necessary after some time to maintain image quality and brightness. The lamp is specifically developed for the Benq MP620P, ensuring compatible mechanical and electrical adaptation to the projector housing.

Light output and operating voltage are critical parameters for function within the device. The 200-watt power rating corresponds to the typical energy consumption for projection lamps of this class and enables sufficient brightness for presentations and image reproduction. The lamp is not supplied with additional components such as cables, adapters, or tools.

Compatibility is limited to the Benq MP620P model. The lamp is not intended for other projector models, even if they have similar technical specifications. The manufacturer part number 5J.J1S01.001 serves as an identification feature for the replacement lamp and enables unambiguous assignment to the original part. The white box packaging contains only the lamp itself, without additional documentation or instructions.

Installation and mounting are performed by removing the old lamp module from the projector housing and inserting the new lamp into the designated holder. The exact procedure is described in the projector's user manual. The lamp is not intended for direct use outside the projector and requires correct installation to avoid damage to the lamp or device.

Operation of the lamp occurs exclusively within the projector housing, where necessary cooling and power supply are provided. Lifespan depends on usage frequency, ambient temperature, and air circulation within the device. Regular maintenance of the projector, including filter cleaning, can extend the lamp's lifespan. The lamp is not suitable for use in other devices or applications.

The delivery time for projector lamps is typically around 1 to 3 weeks. This is common due to the specific manufacturing and storage conditions for replacement lamps. Exact availability depends on the supplier and current stock levels.
Lieske Part No.: 321144
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
77,40 EUR
BenQ MS517 projector lamp Philips 5J.J6L05.001
This projector lamp is a bare lamp manufactured by Philips, specifically designed for use in the projector BenQ MS517. It serves as a replacement for worn-out or defective projection lamps and ensures the restoration of the device’s original image quality and brightness. The lamp is delivered without a housing or additional components, which is typical for replacement lamps of this type, intended to be inserted directly into the projector housing. The power rating is 225 watts, sufficient to meet the requirements of the BenQ MS517 projector and produce adequate light output.

Applications

The lamp is exclusively intended for the BenQ MS517 projector. It is used in professional and private environments where a projector is employed for presentations, video playback, or home cinema. Use in other projector models is not intended and may result in malfunctions or damage.

Features and Equipment in Detail

The bare lamp consists of the actual light source element, which is inserted into the projector housing. The lamp is not equipped with a protective housing, reflector, or electronic control unit. The manufacturer’s part number is 5J.J6L05.001, enabling identification and compatibility with the BenQ MS517 projector. The lamp does not include additional components such as cables, adapters, or mounting aids. Installation is performed by directly inserting the lamp into the designated lamp compartment of the projector.

Technology Explained Simply

The lamp operates at a power rating of 225 watts, necessary to generate sufficient light output for the projection area. The term “bare lamp” means only the light source element is supplied, without additional mechanical or electronic components. The lamp does not feature an integrated cooling system or protection mechanism, as these functions are handled by the projector itself.

Compatibility and Accessories

The lamp is exclusively compatible with the projector model BenQ MS517. Use in other projectors is not recommended, as it may cause malfunctions or damage. The lamp is not supplied with a replacement glass, filter, or cleaning kit. Installation does not require additional tools, as the lamp is inserted directly into the lamp compartment.

Installation and Mounting

Installation involves removing the old lamp module from the projector and inserting the new bare lamp into the designated position. The exact installation instructions are provided in the user manual for the BenQ MS517 projector. The lamp must be securely seated in its holder to ensure stable light output. Installation should take place in a dust-free environment to avoid contamination of the lamp. After installation, the projector must be restarted to initialize the new lamp.

Operation

The lamp enables the restoration of the projector’s original image quality and brightness. Light output is uniform and meets the specifications of the BenQ MS517. No additional adjustment or configuration is required after installation. The lamp is not designed for continuous operation in environments with high temperatures or high humidity.
Lieske Part No.: 535147
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
44,84 EUR
BenQ projector lamp MS619ST Whitebox
The projector lamp for the BenQ MS619ST is a replacement module for restoring light output in the projection device. It is offered as a Whitebox solution, meaning it is delivered without branded packaging and without additional packaging elements. The lamp is specifically designed for use in the BenQ MS619ST projector and replaces the original module with manufacturer number 5J.J9V05.001. The lamp has a power rating of 190 watts, which is essential for the operational reliability and light output of the projector. The lamp is not connected to an integrated lamp housing but is supplied as a pure replacement light module to be inserted into the existing projector housing.

Applications

The lamp is exclusively intended for the BenQ MS619ST projector, which is used in professional environments such as conference rooms, schools, or small event spaces. The MS619ST is a short-throw projector designed for projection onto small to medium-sized screens. The replacement lamp ensures the restoration of original brightness and image quality once the original lamp has reached its service life. Using a compatible replacement lamp is necessary to maintain the projector’s functionality.

Features and Equipment in Detail

The lamp has a power rating of 190 watts, which is required for light generation in the projector. The Whitebox packaging means the lamp is delivered without branded packaging, which is typical for spare parts in the B2B sector. The lamp is not equipped with additional components such as protective caps, cables, or mounting aids. Installation is performed by removing the old lamp and inserting the new one into the existing lamp housing of the projector. The lamp is not suitable for other projector models, as it is specifically adapted to the mechanical and electrical requirements of the BenQ MS619ST.

Technology Explained Simply

The projector lamp operates with an electrical power of 190 watts to generate sufficient light for projection. The light source is a high-pressure mercury vapor or metal halide lamp module, capable of producing a high amount of light in a short time. The Whitebox packaging means the lamp is delivered without branded packaging and without additional packaging elements, which is common for spare parts in the B2B sector. The lamp is not connected to an integrated lamp housing but is supplied as a pure replacement light module to be inserted into the existing projector housing.

Compatibility and Accessories

The lamp is exclusively compatible with the BenQ MS619ST projector. Manufacturer number 5J.J9V05.001 uniquely identifies the replacement module. No additional accessories are included with the lamp. Installation requires no additional tools, as the lamp is inserted into the existing lamp housing of the projector. Compatibility is limited to the specified model; use in other projectors is not intended and may cause damage.

Mounting and Installation

Mounting is performed by removing the old lamp from the projector housing and inserting the new lamp into the same position. The lamp is installed without additional mounting aids or tools. Installation follows the instructions of the projector housing, ensuring that the electrical and mechanical connections of the lamp are correctly connected to those of the projector. The lamp is not intended for direct use outside the projector.

Operational Advantages

Using the replacement lamp ensures the restoration of the projector’s original light output and image quality. The Whitebox packaging enables cost-efficient delivery, as no additional packaging costs are incurred. The lamp is specifically developed for the BenQ MS619ST, ensuring safe and reliable operation. The 190-watt power rating provides sufficient brightness to ensure projection in typical application environments. The lamp does not include additional features such as integrated protection systems or remote control functions, as it functions as a pure replacement module.
Lieske Part No.: 365723
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
81,10 EUR
BenQ MX761 projector lamp Philips 5J.J3J05.001
The projector lamp for the BenQ MX761 is a bare lamp manufactured by Philips, specifically developed for use in projectors of this model. It serves as a replacement for worn-out or failed projection lamps and ensures continuous light output during operation. The lamp is rated at 300 watts, which is sufficient for the typical requirements of projectors in this class. The term bare lamp means that it is delivered without a housing or additional mounting bracket and must be directly installed into the projector housing. The manufacturer's part number is 5J.J3J05.001, which serves as an identification feature for compatibility with the BenQ MX761.

Applications
This lamp is exclusively intended for the BenQ MX761 projector and is used to restore light output after the previous lamp has worn out. It is suitable for professional and commercial applications where high light output and reliability are required, such as in conference rooms, schools, or presentation environments. Use in other projector models is not intended and may cause malfunctions.

Features and Equipment in Detail
The bare lamp is a purely optical component and does not include any additional electronic or mechanical parts. It consists of the actual light source, responsible for projecting images and videos. The lamp is directly inserted into the projector housing, with installation carried out according to the specific connection geometry. The 300-watt power rating corresponds to the standard for projectors in this series and ensures sufficient brightness for the intended use.

Technology Explained Simply
The projector lamp operates on the basis of a high-pressure mercury vapor lamp, which is illuminated by an electric current. Light generation occurs through heating of mercury vapor, which emits intense light under high pressure. The bare lamp is delivered without additional protective or cooling housing, enabling direct integration into the projector housing. The 300-watt power rating is designed for the typical operating mode of projectors in this class and ensures that light output remains constant during operation.

Compatibility and Accessories
The lamp is specifically designed for the BenQ MX761 projector and can only be used in this device. The manufacturer's part number 5J.J3J05.001 serves as an identification feature for compatibility. The lamp is intended as a replacement part to be installed into the existing projector housing.

Installation and Mounting
Mounting is performed by directly inserting the bare lamp into the projector housing. Care must be taken to ensure correct alignment and secure locking of the lamp to guarantee a safe and stable connection. Installation requires opening the projector housing and removing the old lamp. The new lamp is connected to the corresponding terminals and secured. The exact mounting instructions are provided in the projector housing or in the device's operating manual.

Operational Advantages
Using the projector lamp ensures continuous light output and prevents brightness loss over time. The bare lamp allows for quick and easy replacement, as it is directly installed into the device. The 300-watt power rating provides sufficient brightness to enable clear projection even in larger rooms. Compatibility with the BenQ MX761 ensures the lamp functions without issues in the device.
Lieske Part No.: 596906
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
105,29 EUR
BenQ SP840 projector lamp Philips 5J.J2N05-001
This bare projector lamp is a replacement part for the BenQ SP840 projector and is manufactured by Philips. It serves as a direct replacement for the original lamps installed in the device, once they have reached the end of their service life. The lamp is specifically designed for use in projectors requiring high light output and stable operating conditions. As a bare lamp, it is delivered without housing or protective capsule, meaning it must be inserted into the projector housing and connected to the existing lamp module. Using a bare lamp requires knowledge of the projector’s installation instructions, as it is not supplied as a complete module.

Applications

The lamp is exclusively intended for the BenQ SP840 projector. This projector is used in professional environments such as conference rooms, schools, universities, or small event spaces, where clear and bright image reproduction is required. The lamp replaces the original lamps installed in the device and ensures restoration of the original light output. Since it is a bare lamp, it is not suitable for direct outdoor use or environments with high mechanical stress, but is exclusively intended for use within the projector housing.

Functions and Features in Detail

The lamp features a power rating of 300 W, which is a typical nominal power for projectors of this class. This power is necessary to generate sufficient light output for clear projection on larger screens or in rooms with daylight ingress. The lamp is supplied as a bare lamp, meaning it is delivered without additional protective capsule or housing. This enables a cost-effective replacement solution, but requires knowledge of the projector’s installation instructions, as the lamp must be inserted into the existing lamp module.

Technology Explained Simply

The projector lamp is based on high-pressure mercury vapor technology, which is common for projectors of this type. The 300-watt power rating ensures sufficient light output suitable for projecting images and videos in indoor environments. The lamp is powered through the projector housing and produces light that is directed through the projector’s optical system onto the projection surface. Since it is a bare lamp, it is not equipped with a protective housing, requiring installation by inserting the lamp into the existing lamp module. The lamp’s lifespan depends on usage and operating conditions, typically achieving 2000 to 5000 operating hours, depending on projector settings.

Compatibility and Accessories

The lamp is specifically compatible with the BenQ SP840 projector. The manufacturer’s part number is 5J.J2N05-001, enabling precise identification of the lamp. It is a bare lamp, not supplied as a complete module, but intended to be inserted into the existing lamp module of the projector. Compatibility is limited to the BenQ SP840; other projector models are not supported.

Installation and Mounting

Mounting the bare lamp requires opening the projector housing and removing the old lamp module. The new lamp is inserted into the existing module, ensuring that the electrical contacts are correctly connected. Installation should be carried out by a person with technical knowledge, as incorrect installation may damage the projector. After installation, a safety check is required to ensure the lamp is securely seated and no electrical short circuits exist. Detailed installation instructions are provided in the BenQ SP840 projector’s user manual.

A benefit in operation is the cost-effective replacement option, as the bare lamp is delivered without additional housing components. This reduces costs compared to complete lamp modules. The 300-watt power rating ensures sufficient light output suitable for projection in indoor environments. Compatibility with the BenQ SP840 projector allows for direct replacement without requiring additional modifications. The lamp is designed for professional use and provides a reliable light source for presentations and image reproduction.
Lieske Part No.: 874775
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
105,29 EUR
BenQ SP870 projector lamp Osram 9E.0CG01.001
The projector lamp for the BenQ SP870 is a bare lamp from the manufacturer Osram, specifically developed as a replacement lamp for the projection field. It is delivered without housing or additional components and serves as a direct replacement for the light source unit installed in the device. The lamp is designed with a power rating of 350 watts, which is required for the typical application in projectors of this series to ensure sufficient brightness and image quality. The manufacturer's part number is 9E.0CG01.001, serving as the identification feature for the replacement part.

Applications

The lamp is exclusively intended for the BenQ SP870 projector. This projector is used in professional environments such as conference rooms, schools, or small event spaces, where stable and bright projection is required. The replacement lamp enables restoration of the projector’s original performance after the lifespan of the previous lamp, which typically ranges between 1,000 and 3,000 operating hours, depending on usage and operating conditions.

Functions and Equipment in Detail

The lamp is designed as a bare lamp, meaning it is delivered without an integrated lamp housing, protective capsule, or additional electronic components. It is therefore only the light source unit, which is inserted into the existing lamp housing of the projector. The lamp itself is designed with a power rating of 350 watts, which is essential for the required light output in the BenQ SP870.

Technology Explained Simply

The projector lamp is based on halogen-type technology, which is common for projectors of this generation. The 350-watt power rating ensures sufficient light intensity to enable clear projection even in lightly lit rooms. The lamp produces light by electric current flowing through a gas mixture inside the bulb, heating the filament structure and emitting light. The lifespan depends on operating time and thermal load. The lamp is not intended for direct outdoor use or in humid environments, as it does not have a special protection rating such as IP67.

Compatibility and Accessories

The lamp is specifically compatible with the BenQ SP870 projector. Use in other projectors is not recommended, as mechanical fit and electrical control are not guaranteed.

Installation and Mounting

Installing the bare lamp requires opening the projector and removing the old lamp module. The new lamp is inserted into the existing lamp housing, ensuring that the electrical contacts are carefully aligned. Installation should be carried out by a person with technical knowledge, as the lamp is sensitive to mechanical stress. After installation, the projector must be checked for proper function to ensure the lamp is correctly connected.

Operational Advantages

Using an original-compatible replacement lamp such as the Osram 9E.0CG01.001 ensures consistent image quality and brightness matching the original condition of the projector. The lamp is designed for high light output, which is important for professional applications. Using a bare lamp can be more cost-efficient in certain maintenance scenarios, as the existing lamp housing can be reused.
Lieske Part No.: 177703
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
123,90 EUR
BenQ SP890 projector lamp Philips 5J.J2805.001
The projector lamp is a bare, 300-watt lamp manufactured by Philips, specifically designed for use in the BenQ SP890 projector. As a replacement lamp, it restores the projector's full light output and image quality after the previous lamp has worn out. The lamp is delivered without a housing or additional components, which is typical for replacement lamps of this type, intended for direct installation into the projector module. The manufacturer's part number is 5J.J2805.001.

Applications
This lamp is exclusively intended for the BenQ SP890 projector. This projector is used in professional environments such as conference rooms, schools, universities, or small event spaces, where stable and bright image reproduction is required. The lamp replaces the light sources installed in the device, which lose brightness after a certain operating time and must be replaced.

Functions and Equipment in Detail
The lamp has a rated power of 300 watts, which is necessary for light generation in the BenQ SP890 projector. As a bare lamp, it is supplied without an integrated housing or additional electronic components. This means it is directly installed into the projector's lamp module, with mounting and installation following the manufacturer's instructions. The lamp is not suitable for other projector models, as the mechanical and electrical fit is specific to the SP890.

Technology Explained Simply
The 300-watt power rating of the lamp corresponds to the electrical energy it consumes during operation to produce light. The light source itself is a high-pressure mercury vapor or metal vapor arc, which emits light at high temperature and pressure inside the lamp. The lamp generates light that is then projected onto the screen via the projector's optical system. The lamp's lifespan depends on operating time and conditions; typically, it lasts several thousand hours under normal use before a noticeable decrease in brightness occurs.

The lamp is not equipped with a protective housing or integrated cooling, as these functions are handled by the projector itself. The lamp is directly installed into the lamp module, where it is surrounded by the projector's cooling and protection systems.

Compatibility and Accessories
The lamp is exclusively compatible with the BenQ SP890 projector. Use in other projectors is not intended and may cause damage. Installation must follow the manufacturer's guidelines.

Installation and Mounting
Lamp installation involves removing the old lamp module from the projector, with specific steps detailed in the BenQ SP890 projector's manual. The new lamp is inserted into the module and then reinstalled into the projector. Correct alignment and securing of the lamp are essential to ensure safe and functional operation. The lamp is not intended for direct use outside the projector.

Advantages in Operation
Using the original-compatible Philips lamp ensures optimal light output and image quality, meeting the manufacturer's standards. The lamp provides uniform brightness and color reproduction, which is important for professional presentations. Its simple replaceability and direct compatibility with the BenQ SP890 projector simplify maintenance and minimize device downtime. The lamp is not designed for use in other projectors or devices.

The delivery time for projector lamps is typically around 1 to 3 weeks. Therefore, timely ordering is recommended to avoid operational interruptions.

Note: Batteries are not included in the delivery scope.
Lieske Part No.: 701972
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
105,29 EUR
BenQ W1080ST projector lamp Osram 5J.J7L05.001
Bare Projector Lamp Osram
Fits for BenQ W1080ST

Wattage: 240 watts

Original Mfg Part No: 5J.J7L05.001

Attention: Replacement Projector Lamps have a delivery time of 1-3 weeks !
Lieske Part No.: 614434
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
41,30 EUR
BenQ W6500 projector lamp Philips 5J.J2605.001
The projector lamp for the BenQ W6500 is a naked lamp from the manufacturer Philips, specifically developed as a replacement lamp for the projector model BenQ W6500. It serves as a direct replacement for the light sources installed in the device, restoring the image quality and brightness of the projector. The lamp is delivered without housing or additional components, which is typical for replacement lamps in projector technology. Using an original-compatible lamp ensures correct light output and projection stability, without compromising optical quality.

Applications

The lamp is exclusively intended for use in the BenQ W6500 projector. This projector is used in professional environments such as conference rooms, schools, universities, or in entertainment technology, where high light output and clear image reproduction are required. The replacement lamp enables restoration of the original performance when the original lamp is worn out or defective. The lifespan of a projector lamp varies depending on usage, but a replacement after approximately 2000 to 3000 operating hours is typical, with the exact lifespan depending on the operating environment and frequency of use.

Functions and Equipment in Detail

The lamp features a power rating of 280 watts, which is necessary for producing a bright and even projection. The high power ensures sufficient brightness even in larger rooms or under daylight conditions. The lamp is designed as a naked lamp, meaning it is delivered without an integrated lamp housing, protective grille, or electronic control. This design requires precise installation into the projector housing, where both electrical connections and mechanical fixation must fit exactly. The lamp is not intended for direct use outside the projector.

Technology Explained Simply

The projector lamp is based on UHP technology (Ultra High Performance), developed for projectors with high light output and low heat generation. UHP lamps produce bright, white light suitable for projecting images and videos onto large surfaces. The 280-watt power rating corresponds to the nominal power required for the operational reliability and light output of the projector. The lamp is electrically powered and controlled via the projector housing; it does not have its own control or protection functions. Lifespan is influenced by operating temperature, air circulation within the device, and the quality of the electrical supply.

Compatibility and Accessories

The lamp is specifically designed for the BenQ W6500 projector and is identified by the manufacturer's number 5J.J2605.001. This number serves as a reference for compatibility and is relevant when ordering or replacing the lamp. The lamp is not compatible with other projector models unless those models explicitly share the same lamp number. No additional accessories are included with the lamp; installation is performed exclusively within the projector housing, with necessary tools and instructions provided by the projector manufacturer.

Installation and Mounting

Installing the naked lamp requires opening the projector housing and removing the old lamp. The new lamp is inserted into the designated holder and mechanically secured. Electrical connections must be correctly attached to ensure safe power supply. Installation should be carried out by a professional or an authorized service provider to avoid damage to the device or the lamp. After installation, the projector must be tested to ensure the lamp is functioning correctly.

A naked lamp is a light source without housing, specifically developed for replacement in projectors. The UHP technology enables high light output and long service life. The power rating of 280 watts is necessary for operational reliability and projector brightness. The manufacturer's number 5J.J2605.001 uniquely identifies the lamp and ensures compatibility with the BenQ W6500 projector. The lamp is delivered without additional components or packaging, which is typical for replacement lamps in projector technology. Installation takes place within the device, requiring exact fit for both electrical and mechanical connections. Lifespan depends on usage and operating environment, with replacement typically occurring after approximately 2000 to 3000 operating hours. The lamp is not intended for direct use outside the projector and requires precise installation by qualified personnel.
Lieske Part No.: 543728
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
92,04 EUR
5J.07E01.001
Benq ACCS (5J.07E01.001)
F/ MP771
Lieske Part No.: 874444
Made to order · Delivery time approx. 20 workdaysinfo_outline
237,10 EUR
5J.J2S05.001
Benq 5J.J2S05.001 replacement lamp for MP615P
185W 4000H (ECO)
Lieske Part No.: 331060
Made to order · Delivery time approx. 20 workdaysinfo_outline
127,10 EUR
5J.J4L05.001
Benq 5J.J4L05.001 replacement lamp SH960
Lamp for SH960 / TP4940 (Module 1)
Lieske Part No.: 111979
Made to order · Delivery time approx. 20 workdaysinfo_outline
354,41 EUR
5J.J4L05.021
Benq 5J.J4L05.021 replacement lamp SH960
Lamp for SH960 / TP4940 (Module 2)
Lieske Part No.: 758052
Made to order · Delivery time approx. 20 workdaysinfo_outline
354,41 EUR
5J.J4N05.001
Benq 5J.J4N05.001 replacement lamp MX764
F/ MX717 MX764
Lieske Part No.: 457300
Made to order · Delivery time approx. 20 workdaysinfo_outline
224,88 EUR
5J.J4R05.001
Benq 5J.J4R05.001 replacement lamp MX813ST/MW712
The BenQ replacement lamp with manufacturer number 5J.J4R05.001 is a UHP lamp module with a rated power of 230 W, specifically developed as a replacement for projectors of the models MX813ST and MW712. This lamp serves as a direct replacement for the light sources installed in the device, restoring the projector’s image quality and brightness once the original lamp has reached the end of its service life. Using an original replacement lamp ensures optimal light output and prevents damage to the projector caused by incompatible or low-quality replacement parts.

Applications

The lamp is designed for use in professional and commercial environments where projectors are used for presentations, conferences, or screen displays indoors. Compatibility with models MX813ST and MW712 makes it particularly suitable for companies that use these projectors in daily operations. The projectors themselves are designed for use in offices, schools, or small event rooms, with the replacement lamp ensuring continuous availability of the devices.

Features and Equipment in Detail

The lamp is based on UHP technology (Ultra High Performance), known for high light output and long service life. With a rated power of 230 W, it delivers the required brightness to project clear and vibrant images. The UHP technology enables efficient light generation, with the lamp typically installed in a closed housing within the projector.

Technology Explained Simply

The UHP lamp operates using a high-pressure discharge lamp, which generates light by passing an electric current through a gas mixture (usually xenon or metal halide). The high power of 230 W ensures sufficient brightness to project clear images even in lightly lit rooms. Designed as a replacement part, the lamp is inserted directly into the projector without requiring additional adjustments or tools. Installation typically involves removing the old lamp module and inserting the new one, with the exact mounting instructions depending on the specific projector model.

Compatibility and Accessories

The lamp is exclusively compatible with projector models MX813ST and MW712. Use in other projectors is not intended and may cause malfunctions or damage.

Installation and Mounting

Installation is performed by removing the old lamp from the projector housing and inserting the new one. The exact procedure is described in the respective projector manual. No special tools are required, as the lamp is typically secured in the device using a simple locking mechanism. Mounting is usually carried out without additional electrical or mechanical modifications.

Operational Advantages

Using an original BenQ replacement lamp ensures compliance with the manufacturer’s specifications regarding light intensity, color reproduction, and service life. The UHP technology offers high efficiency and enables uniform light distribution. Compatibility with models MX813ST and MW712 ensures direct interchangeability, minimizing operational downtime for maintenance or replacement. The lamp is designed for indoor use and requires no special environmental conditions, provided the projectors are operated according to the manufacturer’s instructions.
Lieske Part No.: 337539
Made to order · Delivery time approx. 20 workdaysinfo_outline
119,77 EUR
5J.J5E05.001
Benq 5J.J5E05.001 replacement lamp for MS513/MX514/MW516
.
Lieske Part No.: 844430
Made to order · Delivery time approx. 20 workdaysinfo_outline
119,77 EUR
5J.J6E05.001
Benq 5J.J6E05.001 replacement lamp for MX662/MX720
.
Lieske Part No.: 407896
Made to order · Delivery time approx. 20 workdaysinfo_outline
160,10 EUR
5J.J6H05.001
Benq ACCS (5J.J6H05.001)
F/MS500/MX501/MW814ST
Lieske Part No.: 847943
Made to order · Delivery time approx. 20 workdaysinfo_outline
119,77 EUR
5J.J6N05.001
Benq 5J.J6N05.001 replacement lamp for MX722
.
Lieske Part No.: 407924
Made to order · Delivery time approx. 20 workdaysinfo_outline
288,42 EUR
5J.J6P05.001
Benq 5J.J6P05.001 replacement lamp MW721
Lamp for BenQ projector MW721
Lieske Part No.: 598749
Made to order · Delivery time approx. 20 workdaysinfo_outline
160,10 EUR
5J.J6R05.001 Benq 5J.J6R05.001 replacement lamp for MW767
BenQ Projector Lamp for MX766 / MW767 / MX822ST
Lieske Part No.: 124144
Made to order · Delivery time approx. 20 workdaysinfo_outline
288,42 EUR
5J.J6S05.001
Benq 5J.J6S05.001 replacement lamp for MS616ST
.
Lieske Part No.: 407921
Made to order · Delivery time approx. 20 workdaysinfo_outline
119,77 EUR
5J.J7K05.001
Benq 5J.J7K05.001 replacement lamp for W750 W770ST
.
Lieske Part No.: 893970
Made to order · Delivery time approx. 20 workdaysinfo_outline
133,22 EUR
5J.J8C05.001
Benq 5J.J8C05.001 spare lamp
SH963 PACK LAMP-1
Lieske Part No.: 906107
Made to order · Delivery time approx. 20 workdaysinfo_outline
450,96 EUR
5J.J8C05.002
Benq 5J.J8C05.002 spare lamp
SH963 PACK LAMP-2
Lieske Part No.: 906105
Made to order · Delivery time approx. 20 workdaysinfo_outline
450,96 EUR
5J.J8F05.001
Benq 5J.J8F05.001 replacement lamp for MX661
Lamp for BenQ projector MX661 / MX503H / MX805ST
Lieske Part No.: 253169
Made to order · Delivery time approx. 20 workdaysinfo_outline
131,99 EUR
5J.J8J05.001
Benq 5J.J8J05.001 replacement lamp for MW663
Lamp for BenQ projector MW663
Lieske Part No.: 623184
Made to order · Delivery time approx. 20 workdaysinfo_outline
131,99 EUR
5J.J8M05.A01
Benq 5J.J8M05.A01 replacement lamp for MX852UST MW853UST
.
Lieske Part No.: 1650929
Made to order · Delivery time approx. 20 workdaysinfo_outline
141,76 EUR
5J.J9A05.001
Benq 5J.J9A05.001 replacement lamp for MX819ST
.
Lieske Part No.: 240201
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
5J.J9E05.001
Benq 5J.J9E05.001 replacement lamp for W1400 W1500
.
Lieske Part No.: 407907
Made to order · Delivery time approx. 20 workdaysinfo_outline
183,32 EUR
5J.J9M05.001
Benq 5J.J9M05.001 replacement lamp for W1300
.
Lieske Part No.: 407894
Made to order · Delivery time approx. 20 workdaysinfo_outline
183,32 EUR
5J.J9P05.001
Benq 5J.J9P05.001 spare lamp
MX666 / MX666+
Lieske Part No.: 906114
Made to order · Delivery time approx. 20 workdaysinfo_outline
177,20 EUR
5J.J9R05.001
Benq 5J.J9R05.001 replacement lamp for MS504
MX505/MS521P/MX522P
Lieske Part No.: 268973
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
5J.J9W05.001
Benq 5J.J9W05.001 spare lamp
MW665 / MW665+
Lieske Part No.: 906113
Made to order · Delivery time approx. 20 workdaysinfo_outline
131,99 EUR
5J.JA105.001
Benq 5J.JA105.001 replacement lamp for MW523
.
Lieske Part No.: 407910
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
5J.JA705.001
Benq 5J.JA705.001 spare lamp
SW916
Lieske Part No.: 873972
Made to order · Delivery time approx. 20 workdaysinfo_outline
347,08 EUR
5J.JA805.001
Benq 5J.JA805.001 replacement lamp for MW724
Replacement Lamp for MW724 Projector
Lieske Part No.: 240158
Made to order · Delivery time approx. 20 workdaysinfo_outline
211,42 EUR
5J.JAM10.001
Benq 5J.JAM10.001 Ceiling Mount Projector Universal
The BenQ CM00G3 is a ceiling mount for projectors, specifically designed for mounting on the room ceiling. The product is offered under manufacturer number 5J.JA
M10.001 and serves as a universal mounting solution for BenQ projectors, excluding models CP120 and CP120C. The mount enables secure and adjustable installation, with a maximum load capacity of 25 kg, which is sufficient for most projectors in professional and private use. The design in black and stainless steel ensures a discreet appearance that can blend into various indoor environments.

Applications
CM00G3 is suitable for use in offices, conference rooms, classrooms, or home cinema setups where a projected screen is to be mounted from the ceiling. The mount is designed for projectors that are not overly heavy and require stable ceiling fixation. Its universal construction allows mounting of various BenQ models, provided they are not among the excluded types CP120 and CP120C.

Features and Equipment in Detail
The mount features a telescopic construction, enabling height adjustment in the range of 127.7 mm to 577.7 mm. This range is sufficient to adapt the projection position to different ceiling heights and room geometries. The tilt angle range is -25° to +25°, allowing precise alignment of the projected image onto the desired surface. The maximum length of the ceiling mount tube is 57.77 cm, the minimum length 12.77 cm, enabling flexible adaptation to various ceiling constructions. The adjustability of the mount is ensured by the telescopic design and tilt function.

Technology Explained Simply
The telescopic design of CM00G3 allows vertical extension of the mount to optimally adjust the projection position. Height adjustment is achieved through mechanical locking of the telescopic parts, securing the position. The tilt function allows angled positioning of the projector to project the image precisely onto the desired surface. The maximum load capacity of 25 kg is sufficient for most projectors in the mid to high performance range. The materials black and stainless steel provide a robust and aesthetically pleasing design.

Compatibility and Accessories
The mount is designed for BenQ projectors, excluding models CP120 and CP120C. It is a universal solution that does not require specific adaptations for individual models. Compatibility information refers exclusively to the mentioned BenQ models.

Installation and Mounting
Mounting is done on the room ceiling, with the mount adjusted to the respective ceiling height using the telescopic construction. Fixation is achieved via designated mounting points, ensuring secure anchoring. The tilt is manually adjusted after installation to correctly align the projected image. Installation does not require special tools or additional mounting accessories, provided the ceiling offers the necessary mounting options.

Operational Advantages
CM00G3 offers a stable and adjustable mounting solution for BenQ projectors, allowing precise adjustment of the projection position. Height and tilt adjustment enable optimal image alignment regardless of room geometry. The maximum load capacity of 25 kg ensures secure fixation, and the black and stainless steel materials provide a robust and aesthetically pleasing design. The universal construction reduces installation effort, as no specific adaptations for individual projector models are required.
Lieske Part No.: 270712
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
69,62 EUR
5J.JAR05.001
Benq 5J.JAR05.001 replacement lamp for MW621ST
.
Lieske Part No.: 407927
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
5J.JCJ05.001
Benq 5J.JCJ05.001 spare lamp
MX704
Lieske Part No.: 1431302
Made to order · Delivery time approx. 20 workdaysinfo_outline
190,64 EUR
5J.JD305.001
Benq 5J.JD305.001 replacement lamp for W1350
.
Lieske Part No.: 896132
Made to order · Delivery time approx. 20 workdaysinfo_outline
213,86 EUR
5J.JDM05.001
Benq 5J.JDM05.001 spare lamp
MX882UST / MW883UST
Lieske Part No.: 876415
Made to order · Delivery time approx. 20 workdaysinfo_outline
160,10 EUR
5J.JE905.001
Benq 5J.JE905.001 spare lamp
MH684
Lieske Part No.: 875701
Made to order · Delivery time approx. 20 workdaysinfo_outline
190,64 EUR
5J.JEE05.001
Benq 5J.JEE05.001 spare lamp
W1110/W2000
Lieske Part No.: 918887
Made to order · Expected to be available from 27.11.2026info_outline
177,20 EUR
5J.JEL05.001
Benq 5J.JEL05.001 spare lamp
TH670
Lieske Part No.: 874021
Made to order · Delivery time approx. 20 workdaysinfo_outline
152,77 EUR
5J.JFG05.A01
Benq 5J.JFG05.A01 projector lamp
MH750 SX751 SH752 SH753 SU754
Lieske Part No.: 1532717
Made to order · Delivery time approx. 20 workdaysinfo_outline
305,53 EUR
5J.JFH05.001
Benq 5J.JFH05.001 replacement lamp for MH530
.
Lieske Part No.: 525673
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
5J.JG705.A01
Benq 5J.JG705.A01 spare lamp
MS531/MW535
Lieske Part No.: 1672793
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
5J.JGP05.001
Benq 5J.JGP05.001 replacement lamp MX825ST/MW826ST
.
Lieske Part No.: 1228604
Made to order · Delivery time approx. 20 workdaysinfo_outline
125,88 EUR
1
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
To the shopping cart Continue shopping

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.