ATEN VE1833 True 4K HDMI USB HDBaseT 3.0 Lite transceiver with PoH content_copy

The ATEN VE1833 True 4K HDMI / USB HDBaseT 3.0 - Lite Transceiver with PoH integrates both transmitter and receiver functions in one compact unit, allowing users to flexibly configure it through a DIP switch according to diverse AV setup. Leveraging HDBaseT 3.0 technology, the VE1833 delivers uncompressed True 4K HDMI signals over distances up to 40 m via a single Cat 6a cable (HDBaseT 3 Certified Cat 6a U/FTP / ATEN's tailor-made HDBaseT cable).
Designed for professional AV environments, the VE1833 supports resolutions up to 4096 x 2160 @ 60Hz (4:4:4) and advanced video formats including HDR, HDR10+, and Dolby Vision, along with HDCP 2.2/2.3, 3D, and Deep Color, ensuring superior video quality. The VE1833 features bi-directional PoH with power redundancy, ensuring continuous operation for critical missions.
The VE1833 extends not only HDMI video but also independent stereo audio, USB 2.0, IR, and bi-directional RS-232 signals all over a Cat 6a cable. It also provides HDMI audio embedding and de-embedding, making it easy to route audio separately when needed, and ideal for setups involving external speakers or audio processors. This all-in-one design streamlines complex installations and allows for seamless integration with video matrix switches, splitters, and more.
Empowered by its versatile feature set and flexible deployment options, the VE1833 is an ideal solution for conference halls, auditoriums, lecture theaters, museums, exhibition spaces, and any environment that demands high-performance AV transmission with simplified setup.Extends uncompressed True 4K HDMI signals up to 40 m over a single Cat 6a cable
Compliant with HDBaseT 3.0 standards – transmits high-quality video, full range IR, bi-directional RS-232, independent stereo audio and USB 2.0 signals channel bypass
Superior video quality – up to 4096 x 2160 @ 60 Hz (4:4:4); HDR, HDR+, Dolby Vision supported
Supports HDMI audio embedding / de-embedding functions
Bi-directional PoH with power redundancy for continuous operation
Flexible for deployment – can be configured as a transmitter or receiver depending on the AV solution
HDMI (3D, Deep Color, 4K/60Hz); HDCP2.2/2.3 compliant
Supports HDMI local output
Compliant with the USB 2.0 standard for a wide range of USB peripherals compatibility
LED indication of HDBaseT and HDMI signal status for easier recognition
Supports extremely high refresh rates up to 240Hz for the connected display
Firmware upgradable
Built-in 8KV / 15KV ESD protection
Plug-and-play
Rack-mountable
Package Contents1 x VE1833 True 4K HDMI / USB HDBaseT 3.0-Lite Transceiver with PoH
1 x power adapter and power cord
1 x RS-232 terminal block
1 x user instructions
Video Input
Interfaces1 x HDMI Type A Female (Black)
Impedance100 ohms
Max. Distance5 m
Video Output
Interfaces1 x HDMI Type A Female (Black)
Impedance100 ohms
Max. Distance5 m
Video
Max. Data Rate18Gbps (6Gbps per lane)
Max. Pixel Clock600 MHz
ComplianceHDMI (3D, Deep Color, 4K/60Hz); 4K HDR
HDCP2.2/2.3 Compatible
Consumer Electronics Control (CEC)*
*The CEC signals are only bypassed from the transmitter unit to the receiver unit and do not support local output.
Max. Resolution4096 x 2160 @ 60Hz (4:4:4)
3840 x 2160 @ 60Hz (4:4:4)
Max. Resolutions / DistanceUp to 4K x 2K @ 60Hz (4:4:4) @40m (HDBaseT3 Certified Cat 6a U/FTP cable / ATEN’s tailor-made HDBaseT cable)
Audio
Input1 x HDMI Type A Female (Black)
1 x Stereo Audio ( mini stereo Jack female , Green)
Output1 x HDMI Type A Female (Black)
1 x Stereo Audio ( mini stereo Jack female , Green)
Connectors
Unit To Unit1 x RJ-45 Female (HDBaseT)
Power1 x DC Jack (Black) with locking
1 x RJ-45 Female, POH PD & PSE supported
Control
RS-232 ChannelConnector: 1 x Terminal Block, 3 pole
Baud Rate: 19200, Data Bits:8,
Stop Bits:1, no parity and flow control
IR Channel1 x Mini Stereo Jack Female, (Bi-directional, Black)
30K ~56KHz full range transmission
USB Channel1 x USB2.0 Type B Female (White, Host)
2 x USB2.0 Type A Female (White, Device)
Transmission data bandwidth: Up to 300Mbps
Power ConsumptionDC12V:6.01W:92BTU/h (Tx)
DC12V:7.09W:118BTU/h (Rx)
Note:

• The measurement in Watts indicates the typical power consumption of the device with no external loading.
• The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Switches
Selection1 x Slide Switch - T (Be a Transmitter) / R (Be a Receiver) selection
Mode Selection1 x Slide Switch - HDMI Audio embed or De-embed ON/OFF selection
1 x Slide Switch - POH PD or PSE selection
1 x Slide Switch - RS232 Command or Bypass mode selection
Firmware Upgrade1 x Slide Switch - ON/OFF
LEDs
PowerTX: 1 x DC in Power supplied (Green) & 1 x POH Power supplied (Orange)
RX: 1 x DC in Power supplied (Green) & 1 x POH Power supplied (Orange)
NOTE: The TX or RX LED lights to indicate which role the VE1833 is set to by DC Power or POH.
Link1 x TX Link status (Transmitter, Yellow Green)
1 x RX Link status (Receiver, Yellow Green)
Video Output1 x RX HDMI OUT status (Receiver, Orange)
Video Input1 x Tx HDMI IN status (Transmitter, Orange)
Environmental
Operating Temperature0 - 40°C
Storage Temperature-20 - 60°C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
HousingMetal
Weight0.64 kg ( 1.41 lb )
Dimensions (L x W x H) with bracket16.94 x 14.69 x 3.00 cm
(6.67 x 5.78 x 1.18 in.)
Dimensions (L x W x H) without bracket16.60 x 12.49 x 2.90 cm
(6.54 x 4.92 x 1.14 in.)
Input Resolutions4096 x 2160p 24 / 25 / 30 / 50 / 60 Hz  1280 x 800 @ 60 Hz  
4096 x 2160p 50 / 60 Hz 4:2:0  : 1080p 24 / 25 / 30 / 50 / 60 Hz  
3840 x 2160p 24 / 25 / 30 / 50 / 60 Hz  : 1080i  50 / 60 Hz  
3840 x 2160p 50 / 60 Hz 4:2:0  : 1024 x 768 @ 60 / 70 / 75 Hz  
2560 x 1440 @ 144 Hz  : 800 x 600 @ 56 / 60 / 72 / 75 Hz  
1920 x 1200 @ 60 Hz / 60 Hz (Reduced Blanking)  : 720p 50 / 60 Hz  
1920 x 1080 @ 60 / 120 / 144 / 240 Hz  : 720 x 400 @ 70 Hz  
1680 x 1050 @ 60 Hz  : 640 x 480 @ 60 / 67 / 72 / 75 Hz  
1600 x 1200 @ 60 Hz  : 640 x 480 @ 60 Hz (4:3)  
1440 x 900 @ 60 Hz  : 576p 50 Hz (4:3 / 16:9)  
1400 x 1050 @ 60 Hz  : 480p 60 Hz (4:3 / 16:9)
1280 x 1024 @ 60 / 75 Hz  :



Features
Type	AV transmitter & receiver
Maximum resolution	4096 x 2160 pixels
Maximum transfer distance	40 m
Maximum refresh rate	60 Hz
Bandwidth	18 Gbit/s
Material	Metal
Impedance	100 Ω
HDCP version	2.2/2.3
Product colour	Black
High Dynamic Range (HDR) supported
LED indicators
HDCP
3D
Firmware upgradeable
Consumer Electronics Control (CEC) support
Logistics data
Master (outer) case width	232 mm
Master (outer) case length	500 mm
Master (outer) case height	283 mm
Master (outer) case gross weight	6.69 kg
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 80%
Packaging data
Package width	95 mm
Package depth	265 mm
Package height	220 mm
Package weight	1.22 kg
Ports & interfaces
Connectivity technology	Wired
RJ-45 output ports	1
HDMI in	1
Number of HDMI outputs	1
USB ports quantity	3
USB connector type	USB Type-A, USB Type-B
Remote (IR) output	1
Ethernet LAN
3.5 mm (1/8-inch) in
3.5 mm (1/8-inch) out
DC-in jack
Power
Power source type	DC
Power consumption (TX)	6.01 W
Power consumption (RX)	7.09 W
Technical data
Max. distance	40m
Article type	Transceiver
Max. resolution	4096x2160 / 60Hz
Technical details
Country of origin	Taiwan
Weight & dimensions
Width	146.9 mm
Depth	169.4 mm
Height	30 mm
Weight	640 g

---