The
projector lamp for the Acer X110 is a
bare lamp from the manufacturer Osram, specifically developed for use in projectors of this model. It serves as a replacement for worn-out or failed projection lamps and ensures the restoration of the original light output and image quality. The lamp is delivered without housing or additional components, which is typical for replacement lamps of this type, designed to be inserted directly into the projector housing.
Applications
The lamp is exclusively intended for the Acer X110 projector. It is used in professional and private environments where stable and bright projection is required, for example in conference rooms, schools, or for home cinema applications. Use in other projector models is not intended and may lead to malfunctions or damage.
Functions and Equipment in Detail
The
bare lamp consists of the actual light source, which is inserted directly into the projector housing. It is not connected to a protective housing, reflector, or control unit. The lamp is designed for a power rating of
240 watts, representing the electrical energy required for light generation in the projector. This power rating is necessary to ensure the intended brightness and image quality of the projector.
Technology Explained Simply
The
projector lamp operates using a high-performance discharge lamp that generates light through electric current. The
240-watt power rating represents the electrical energy the lamp requires to achieve the necessary light output. The term
bare lamp means it is delivered without additional mechanical or electronic components and is inserted directly into the projector housing. The lamp is not designed for direct operation outside the projector.
Compatibility and Accessories
The lamp is specifically compatible with the
Acer X110 projector. Use in other projectors is not recommended, as it may cause malfunctions or damage. The lamp is delivered without additional components such as cables, adapters, or mounting aids.
The lamp is not connected to a protective housing, reflector, or control unit. The lamp is not designed for direct operation outside the projector.
Installation and Mounting
Installation is carried out by removing the old lamp from the projector housing and inserting the new
bare lamp at the same position. The exact mounting instructions are included in the projector manual and typically require opening the lamp compartment, removing the old lamp, and inserting the new one. It is important that the lamp is correctly positioned and secured to ensure safe and stable operation.
Operational Advantages
Using the
bare lamp enables quick and cost-effective restoration of projection performance. The
240-watt power rating ensures sufficient brightness and image quality as specified for the Acer X110. The lamp is designed as a replacement part to extend the projector’s service life and reduce operating costs. Its simple replaceability facilitates maintenance and reduces downtime.
The delivery time for projector lamps is typically around 1 to 3 weeks. Therefore, it is recommended to place the order in good time before the planned replacement to avoid operational interruptions.
Lieske Part No.: 818289

Delivery time from supplier's stock (ca.) 20 workdays
info_outline