Installation Material from ABB Automation

The red Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 300179

The brown Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1584494

The red Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1317227

The orange Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1314080

The yellow Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1316337

The green Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1317154

The blue Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1314081

The purple Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1314082

The Ty-Rap steel nose cable tie with integrated labeling area is a marking tie with a labeling field for quick marking and bundling. It is available in up to four bindings. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 297256

The Ty-Rap steel nose cable tie with integrated labeling area is a marking tie with a labeling field for quick marking and bundling. It is available in up to four bindings. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 250 pieces
Lieske Part No.: 1581160

The Ty-Rap special cable tie for blind installation is suitable for quick, concealed installation in hard-to-reach places and for large wall thicknesses. As it can be removed again before final processing, the special tie is ideal for fastening to vehicle frames. In addition, the locking head covers the installation opening when processed. A large selection of accessories completes the range.
Sales unit: 500 pieces
Lieske Part No.: 1317163

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 299338

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 299308

The Ty-Rap special cable tie for blind installation is suitable for quick, concealed installation in hard-to-reach places and for large wall thicknesses. As it can be removed again before final processing, the special tie is ideal for fastening to vehicle frames. In addition, the locking head covers the installation opening when processed. A large selection of accessories completes the range.
Sales unit: 50 pieces
Lieske Part No.: 1318093

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1584493

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 300047

The natural-colored Ty-Rap special cable tie for reopening is suitable for bundling temporary wiring and for pre-assembly. It can be used multiple times, is particularly easy to install and is available in 2 lengths. In addition, no tools are required for this special tie. The powerful and reliable Ty-Rap can be used in adverse conditions such as vibration, heat or cold. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 104958

The two-part Ty-Rap special cable tie is available on a roll with separate locking heads for reopening and is available in pre-cut lengths and with pre-assembled heads. The tie is made of UV-resistant polypropylene and is therefore particularly resistant to chemical substances, the heads are made of weather-resistant, robust polyamide 6.6. The heavy-duty tie is suitable for numerous applications and can be removed again by pushing away the locking nose. When processed, the locking head covers the installation opening. A large selection of accessories completes the range.
Lieske Part No.: 299310

The Ty-Rap special cable tie with integrated re-opening lock is a one-piece, robust cable tie for heavy-duty applications. It is reusable, easy to install and ideal for temporary bundling. Fast, permanent or temporary fastenings are possible. The powerful and reliable Ty-Rap can be used in adverse conditions such as vibration, heat or cold. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 338826

The two-part Ty-Rap special cable tie in a pre-assembled version for reopening is a robust special tie in pre-cut lengths and with pre-assembled heads. The tie is made of UV-resistant polypropylene and is therefore particularly resistant to chemical substances, the heads are made of weather-resistant, robust polyamide 6.6. The heavy-duty tie is suitable for numerous applications and can be released again by pushing away the locking nose. When processed, the locking head covers the installation opening. A large selection of accessories completes the range.
Lieske Part No.: 1311288

The Ty-Rap special cable tie with integrated re-opening lock is a one-piece, robust cable tie for heavy-duty applications. It is reusable, easy to install and ideal for temporary bundling. Fast, permanent or temporary fastenings are possible. The powerful and reliable Ty-Rap can be used in adverse conditions such as vibration, heat or cold. A large selection of accessories complements the range.
Sales unit: 25 pieces
Lieske Part No.: 1318081

The two-part Ty-Rap special cable tie in a pre-assembled version for reopening is a robust special tie in pre-cut lengths and with pre-assembled heads. The tie is made of UV-resistant polypropylene and is therefore particularly resistant to chemical substances, the heads are made of weather-resistant, robust polyamide 6.6. The heavy-duty tie is suitable for numerous applications and can be released again by pushing away the locking nose. When processed, the locking head covers the installation opening. A large selection of accessories completes the range.
Sales unit: 25 pieces
Lieske Part No.: 1425855

The two-part Ty-Rap special cable tie in a pre-assembled version for reopening is a robust special tie in pre-cut lengths and with pre-assembled heads. The tie is made of UV-resistant polypropylene and is therefore particularly resistant to chemical substances, the heads are made of weather-resistant, robust polyamide 6.6. The heavy-duty tie is suitable for numerous applications and can be released again by pushing away the locking nose. When processed, the locking head covers the installation opening. A large selection of accessories completes the range.
Lieske Part No.: 338823

The two-part Ty-Rap special cable tie in a pre-assembled version for reopening is a robust special tie in pre-cut lengths and with pre-assembled heads. The tie is made of UV-resistant polypropylene and is therefore particularly resistant to chemical substances, the heads are made of weather-resistant, robust polyamide 6.6. The heavy-duty tie is suitable for numerous applications and can be released again by pushing away the locking nose. When processed, the locking head covers the installation opening. A large selection of accessories completes the range.
Lieske Part No.: 394312

The two-part Ty-Rap special cable tie in a pre-assembled version for reopening is a robust special tie in pre-cut lengths and with pre-assembled heads. The tie is made of UV-resistant polypropylene and is therefore particularly resistant to chemical substances, the heads are made of weather-resistant, robust polyamide 6.6. The heavy-duty tie is suitable for numerous applications and can be released again by pushing away the locking nose. When processed, the locking head covers the installation opening. A large selection of accessories completes the range.
Lieske Part No.: 791714

The flame-retardant version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is ideal for use in locations where smoke-reducing and flame-retardant behavior is required. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1311326

The flame-retardant version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is ideal for use in locations where smoke-reducing and flame-retardant behavior is required. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1311247

Die flammwidrige Version des Ty-Rap Stahlnasenkabelbinders aus Polyamid 6.6 ist ideal für den Einsatz an Orten, wo rauchreduziertes und flammwidriges Verhalten gefordert wird. Die korrosionsbeständige, antimagnetische Stahlnase aus dem Edelstahl Typ 316 im Kabelbinderkopf garantiert den stärksten und sichersten Halt, der am Markt zu finden ist. Der leistungsstarke und zuverlässige Ty-Rap kann unter widrigsten Bedingungen wie unter Vibrationen, Hitze oder Kälte eingesetzt werden. Die abgerundeten Kanten und Konturen des Kopfes und des Binders sorgen für eine anwenderfreundliche Handhabung und verhindern, dass die Isolation der Kabel und Leitungen durch scharfe Kanten oder Verzahnungen beschädigt werden. Zudem reduziert der glatte Körper ohne Rasterzähne oder Rillen die Zahl überbeanspruchter Stellen. Die leichte Noppung auf der Innenseite des Bandes gewährleistet einen festen Sitz des Binders auf dem Kabelbündel. Eine große Auswahl an Zubehör ergänzt das Sortiment.
Sales unit: 500 pieces
Lieske Part No.: 494989

The high temperature resistant version of the Ty-Rap steel nose cable tie made of polyamide 4.6 can be used in high temperature areas. This series is therefore ideal for applications in industry, the commercial sector and the automotive industry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1311011

The high temperature resistant version of the Ty-Rap steel nose cable tie made of polyamide 4.6 can be used in high temperature areas. This series is therefore ideal for applications in industry, the commercial sector and the automotive industry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Lieske Part No.: 1326966

The high temperature resistant version of the Ty-Rap steel nose cable tie made of polyamide 4.6 can be used in high temperature areas. This series is therefore ideal for applications in industry, the commercial sector and the automotive industry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1311010

The UV-resistant version of the Ty-Rap steel nose cable tie made of black polypropylene has excellent resistance to hot materials and chemicals as well as excellent long-term stability against embrittlement. This series is therefore suitable for applications in outdoor installations, the chemical industry and shipbuilding, among others. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold available on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 1318257

The UV-resistant version of the Ty-Rap steel nose cable tie made of black polypropylene has excellent resistance to hot materials and chemicals as well as excellent long-term stability against embrittlement. This series is therefore suitable for applications in outdoor installations, the chemical industry and shipbuilding, among others. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold available on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1318256

The Ty-Rap steel nose cable tie made of fluoropolymer ECTFE is characterized by very low smoke development in the event of a fire and is therefore suitable for applications where reduced smoke development is required, such as in security areas and assembly areas. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold available on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The slight nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1311683

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 281863

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1318255

Der Ty-Grip Vollkunststoff-Kabelbinder ist ein Klettbandkabelbinder, der sich besonders für Einsatzbereiche eignet, bei denen häufige Änderungen erforderlich sind. Diese Klettbandkabelbinder lassen sich sehr schnell und einfach ohne Werkzeug verarbeiten. Sie sind in diversen Längen für unterschiedliche Bündeldurchmesser lieferbar. Bei dieser Baureihe ist der Klettbandkabelbinder entweder mit Verschlussschlitz oder Befestigungsschlaufe erhältlich. Da es bei der Anwendung nicht zum Überschnüren der Kabel kommt, ist der leistungsstarke und zuverlässige Ty-Grip der ideale Einsatzpartner bei Sonderanwendungen und druckempfindlichen Kabeln wie z.B. bei Lichtwellenleitern, Fernmelde- und Netzwerkkabeln. Sie sind wieder einfach zu öffnen und damit wiederverwendbar. Eine große Auswahl an Zubehör ergänzt das Sortiment.
Sales unit: 10 pieces
Lieske Part No.: 494988

The heat-stabilized, UV-resistant version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is suitable for outdoor installations and has the advantage of lower installation temperatures. This series is therefore ideal for OEM applications and maintenance. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1311012

The heat-stabilized, UV-resistant version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is suitable for outdoor installations and has the advantage of lower installation temperatures. This series is therefore ideal for OEM applications and maintenance. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 319756

The heat-stabilized, UV-resistant version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is suitable for outdoor installations and has the advantage of lower installation temperatures. This series is therefore ideal for OEM applications and maintenance. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 466768

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337819

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337831

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337830

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337829

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337828

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 1337827

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 1337826

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337825

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337824

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337823