Installation Material from Weidmüller

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 1955133

Terminal block for connecting or linking protective conductors to the mounting base (earth). Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 50 pieces
Lieske Part No.: 1955134

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 1955481

Terminal block for connecting or linking protective conductors to the mounting base (earth). Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 50 pieces
Lieske Part No.: 1955491

Cover for terminals.
Lieske Part No.: 1955135

Cover for terminals.
Sales unit: 10 pieces
Lieske Part No.: 1955483

The end bracket guarantees a permanently secure fit on the mounting rail and prevents slipping. The end bracket has marking options for group markers and the option of accommodating test plugs.
Sales unit: 10 pieces
Lieske Part No.: 1955485

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 1955136

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 25 pieces
Lieske Part No.: 1955137

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 25 pieces
Lieske Part No.: 1955138

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 25 pieces
Lieske Part No.: 1955139

A switch lock prevents the accidental opening or closing of electrical circuits. It blocks the isolating slide in its respective position. The switch lock can be easily pressed into the terminal from above, but can only be released again using tools.
Sales unit: 50 pieces
Lieske Part No.: 1955140

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1056735

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1056736

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955141

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955142

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955143

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955144

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955145

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955146

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955147

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955148

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1056737

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955156

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955157

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955158

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955249

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955486

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1055885

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1055886

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955487

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955488

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1055887

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 50 pieces
Lieske Part No.: 1955159

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 25 pieces
Lieske Part No.: 1955160

A locking lever is used on the WDT 1.5 terminal. In order to avoid making the terminal unnecessarily large, a small toggle switch is installed. The operation of the toggle switch is made much easier by a longer lever arm in the form of a locking lever. It is also possible to connect several locking levers in order to switch a large number of terminals at the same time.
Sales unit: 10 pieces
Lieske Part No.: 1955161

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955493

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955494

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955495

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955496

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955477

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955478

Socket for measurements on bridged terminal groups.
Sales unit: 48 pieces
Lieske Part No.: 1955479

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 1000 pieces
Lieske Part No.: 1953851

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 1000 pieces
Lieske Part No.: 1953852

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 1000 pieces
Lieske Part No.: 1953850

Markierer für die Kennzeichnung von Betriebsmitteln. Die Markierer können mit einem Drucker oder Plotter und entsprechender Software beschriftet werden.
Sales unit: 5000 pieces
Lieske Part No.: 704055

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 10000 pieces
Lieske Part No.: 2106515

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 2034974

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 6000 pieces
Lieske Part No.: 1060293