Installation Material from Weidmüller

Tool for mechanical adjustment or operation.
Lieske Part No.: 562203

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 20 pieces
Lieske Part No.: 896460

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 10 pieces
Lieske Part No.: 857888

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 10 pieces
Lieske Part No.: 576884

Through - double terminals ZDK, beige
Terminal block width 5 mm
Flexible connection Ø: 0.5-2.5 mm ²
single-wire connection Ø: 0.5-2.5 mm ² Type: ZDK2.5/1.5


Quantity: 1 unit.

Please order in units of 50
Lieske Part No.: 613234

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 614929

End plates / partitions / retaining plates Colour: Beige Model: for ZDK 2,5 /
, 5 Type: ZAP/TWZDK2.5 /
.5 Item:
ST.
Lieske Part No.: 857066

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 200 pieces
Lieske Part No.: 392207

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 40 pieces
Lieske Part No.: 894414

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 40 pieces
Lieske Part No.: 338457

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 40 pieces
Lieske Part No.: 895346

Holder for device markers for device identification. The holders can be attached using screws, glue or cable ties.
Sales unit: 40 pieces
Lieske Part No.: 703118

Screen terminals KLBÜ The clamp of KLBÜ series allow safe and easy connection of the shielding of cables. Five versions for different cable diameters can be easily attached to the busbar
mounted x 3 mm. Different busbar support round out the program. for attachment to the
x 3 mm busbars Version: for conductor diameters of 2-6 mm Type: KLBÜ2X2-6 Quantity:
ST.
Sales unit: 10 pieces
Lieske Part No.: 733986

Label holder with large, additional labeling area.
Sales unit: 100 pieces
Lieske Part No.: 801074

Label holder with large, additional labeling area.
Sales unit: 100 pieces
Lieske Part No.: 579971

Terminal block for potential distribution. With high contact density.
Sales unit: 100 pieces
Lieske Part No.: 176303

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 662361

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 600 pieces
Lieske Part No.: 143764

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 600 pieces
Lieske Part No.: 188859

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 120 pieces
Lieske Part No.: 895923

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 600 pieces
Lieske Part No.: 149394

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 600 pieces
Lieske Part No.: 571157

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 120 pieces
Lieske Part No.: 939873

Through - double terminals ZDK, blue terminal block width: 5 mm Connection diameter flexible cable: 0.5 to 2, 5-square-mm diameter solid wire: 0.5 to 2, 5 mm ² Type: ZDK2.5 /
.5 BL item:
ST.
Lieske Part No.: 852609

Reducing sleeve for simplified connection of conductors with small cross-section.
Sales unit: 1000 pieces
Lieske Part No.: 1980153

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 400 pieces
Lieske Part No.: 490707

TM-I, Conductor and cable markers, 20 x 4 mm, red
Quantity: 400 pieces
Sales unit: 400 pieces
Lieske Part No.: 435000

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 400 pieces
Lieske Part No.: 514563

TM-I, Conductor and cable markers, 20 x 4 mm, green
Quantity: 400 pieces
Sales unit: 400 pieces
Lieske Part No.: 434996

TM-I, Conductor and cable markers, 20 x 4 mm, blue
Quantity: 400 pieces
Sales unit: 400 pieces
Lieske Part No.: 434994

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 80 pieces
Lieske Part No.: 897593

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 794717

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 790894

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 791036

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 790779

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 794718

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 781611

Reihenklemme zum Anschließen oder Verbinden von Leitern mit dauerhaft sicherem Kontakt. Gehärteter Stahl hält den mechanischen Kräften stand, Zinn-beschichtetes Kupfer sorgt für beste Leitfähigkeit.
Sales unit: 100 pieces
Lieske Part No.: 2144069

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 781630

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 781672

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 781723

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 780931

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 780943

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 1232405

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 780998

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 781044

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 781092

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Lieske Part No.: 897604

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Lieske Part No.: 262527

Markers for marking equipment. The markers can be labeled with a printer or plotter and appropriate software.
Lieske Part No.: 945419