Installation Material from WAGO

Blind housing, same contour as 4-wire initiator terminals, 3-wire initiator terminals with PE connection or corresponding actuator terminals, grey
Sales unit: 50 pieces
Lieske Part No.: 1963596

3-conductor actuator terminal, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 589926

4-conductor initiator feed terminal, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 10 pieces
Lieske Part No.: 914790

4-wire initiator feed terminal LED green for PNP (plus) switching initiators Feed on the initiator side with color-printed conductor entries 2.5 mm² CAGE CLAMP® gray
Sales unit: 10 pieces
Lieske Part No.: 758074

2-conductor actuator terminal, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 597248

2-conductor actuator feed terminal, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 1963127

4-wire initiator feed terminal, green LED, feed on the initiator side, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 10 pieces
Lieske Part No.: 1962858

Initiator feed terminal feed on the control cabinet side with end plate for 4-wire initiators grey
Sales unit: 20 pieces
Lieske Part No.: 167572

4-wire initiator terminal, for PNP (plus) switching initiators, for fuse plugs, without end plate, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 518102

4-wire initiator terminal, for PNP (plus) switching initiators, for fuse plugs, with grey end plate, with colour-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1232252

4-wire initiator terminal, for PNP (plus) switching initiators, for fuse plugs, with orange end plate, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 1962859

2-conductor actuator feed terminal, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 10 pieces
Lieske Part No.: 1963128

2-wire actuator feed terminal, with PE connection, with color-printed conductor entries, 2.5 mm², CAGE CLAMP®, 2.50 mm², gray
Sales unit: 10 pieces
Lieske Part No.: 633981

Three-level terminal, 6-conductor protective conductor terminal, 2.5 mm², with label holder, internally bridged, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 40 pieces
Lieske Part No.: 796714

2-conductor feed-through terminal, 2.5 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 490156

2-wire feed-through terminal suitable for Ex i applications blue
Sales unit: 100 pieces
Lieske Part No.: 179168

4-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 846179

4-wire feed-through terminal for Ex i applications blue
Sales unit: 100 pieces
Lieske Part No.: 276910

4-conductor base terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 315106

2-conductor protective conductor terminal, 2.5 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², green-yellow
Lieske Part No.: 791181

2-conductor protective conductor terminal, 2.5 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 100 pieces
Lieske Part No.: 1939222

Base terminal block partition orange with 4-conductor terminals 12 mm wide grey
Lieske Part No.: 201679

Base terminal block partition orange with 4-conductor terminals 17 mm wide grey
Sales unit: 30 pieces
Lieske Part No.: 656343

3-conductor base terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1232342

2-conductor disconnect terminal for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 760912

2-wire diode terminal with diode 1N4007 grey
Sales unit: 100 pieces
Lieske Part No.: 545653

2-wire diode terminal with diode 1N4007 grey
Sales unit: 10 pieces
Lieske Part No.: 592885

2-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 532243

2-conductor base terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 558086

Base terminal block 4-pole with 2-wire terminals with orange partition for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² grey
Lieske Part No.: 623713

Base terminal block 6-pole with 2-conductor terminals with orange partition for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² grey
Lieske Part No.: 720287

4-conductor feed-through terminal, 2.5 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 437627

4-conductor disconnect terminal for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 643841

4-wire diode terminal with diode 1N4007 grey
Sales unit: 100 pieces
Lieske Part No.: 236780

4-wire diode terminal with diode 1N4007 grey
Sales unit: 100 pieces
Lieske Part No.: 642048

Component terminal, 4 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 890191

Component terminal, 4 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962860

Double feed-through terminal with side label holders grey
Sales unit: 100 pieces
Lieske Part No.: 660150

2-conductor isolating and measuring terminal, without pivoting isolating blade, with touch-proof test sockets, test socket red, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1964001

Base terminal block partition orange with 4-conductor terminals 22 mm wide grey
Lieske Part No.: 704738

Base terminal block partition orange with 4-conductor terminals 27 mm wide grey
Lieske Part No.: 199616

4-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 423261

4-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², gray
Sales unit: 100 pieces
Lieske Part No.: 693656

4-wire feed-through terminal suitable for Ex i applications blue
Sales unit: 100 pieces
Lieske Part No.: 640622

Base terminal block, 14-pin, with 4-conductor terminals, with orange partition, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1963512

3-conductor protective conductor terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², green-yellow
Lieske Part No.: 117348

3-wire protective conductor terminal suitable for Ex e II applications green-yellow
Sales unit: 100 pieces
Lieske Part No.: 385279

Base terminal block, 8-pin, with 2-conductor terminals, with orange partition, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 160186

Base terminal block partition orange with 2-conductor terminals 27 mm wide grey
Lieske Part No.: 948007

3-conductor shield terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², white
Sales unit: 100 pieces
Lieske Part No.: 564922