Installation Material from WAGO

4-conductor double-deck terminal, 8-conductor protective conductor terminal, 2.5 mm², PE, suitable for Ex e II applications, with label carrier, internally bridged, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 113860

4-conductor double-deck terminal block 8-conductor through-terminal block L with label holder Housing colour grey internally bridged Conductor entry violet printed grey
Sales unit: 50 pieces
Lieske Part No.: 909356

4-conductor double-deck terminal, 8-conductor feed-through terminal, N, with label carrier, suitable for Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1242172

4-conductor double-deck terminal, protective conductor/through terminal, 2.5 mm², PE/N, with label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1967473

4-conductor double-deck terminal, shield conductor/through terminal, 2.5 mm², shield/N, with label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945685

4-conductor double-deck terminal, shield conductor/through terminal, 2.5 mm², shield/L, with label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945686

End and intermediate plate, 0.8 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 516300

End and intermediate plate, 0.8 mm thick, orange
Lieske Part No.: 819891

Double-deck terminal Feed-through/feed-through terminal Same contour as double-deck disconnect terminal L/L Without label carrier Housing colour grey grey
Sales unit: 50 pieces
Lieske Part No.: 722428

Double-deck terminal, feed-through/feed-through terminal, N/L, conductor entry EG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945657

Double-deck terminal, through/through terminal, same contour as double-deck disconnect terminal, L/N, without label carrier, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945658

Double-deck terminal, feed-through/feed-through terminal, same contour as double-deck disconnect terminal, N/N, without label carrier, suitable for Ex i applications, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1884169

Double-deck terminal 4-conductor protective conductor terminal same contour as double-deck PE disconnect terminal without label carrier Housing color green-yellow internally bridged green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1884172

Double-deck terminal, 4-conductor through-terminal, same contour as double-deck disconnect terminal, L, without label carrier, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945659

Double-deck terminal, 4-conductor feed-through terminal, same contour as double-deck disconnect terminal, N, without label carrier, suitable for Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1945656

Double-deck fuse terminal, with pivoting fuse holder, feed-through/fuse terminal, for G-fuse insert 5 x 20 mm, L/L, without defect indicator, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1961672

Double-deck fuse terminal, with pivoting fuse holder, feed-through/fuse terminal, for G-fuse insert 5 x 20 mm, with defect indication via LED, 12 - 30 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1884173

Double-deck fuse terminal, with pivoting fuse holder, feed-through/fuse terminal, for G-fuse insert 5 x 20 mm, with defect indication via LED, 30 - 65 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1945695

Double-deck fuse terminal, with pivoting fuse holder, feed-through/fuse terminal, for G-fuse insert 5 x 20 mm, with defect indication via LED, 230 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1945696

Double-deck fuse terminal, with pivoting fuse holder, feed-through/fuse terminal, for G-fuse insert 5 x 20 mm, with defect indication via LED, 120 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1949225

Double-deck terminal through/fuse terminal for G-fuse insert 5 x 20 mm without defect indicator N/L grey
Sales unit: 25 pieces
Lieske Part No.: 1133763

Double-deck terminal, protective conductor/through terminal, same contour as double-deck disconnect terminal, 2.5 mm², PE/N, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945660

Double-deck terminal, protective conductor/through terminal, same contour as double-deck disconnect terminal, 2.5 mm², PE/L, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945661

Double-deck base terminal, L/L, upper floor base, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1884168

Double-deck base terminal, N/L, upper floor base, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1133754

Double-deck base terminal, PE/L, upper floor base, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945655

Double-deck disconnect terminal with pivoting disconnect blade Housing colour grey L/L grey
Sales unit: 50 pieces
Lieske Part No.: 1945650

Double-deck disconnect terminal, with pivoting disconnect blade, N/L, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945651

Double-deck disconnect terminal, with pivoting disconnect blade, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1949223

End and intermediate plate 1 mm thick grey
Sales unit: 25 pieces
Lieske Part No.: 1133767

Abschluss- und Zwischenplatte 1 mm dick orange

Sales unit: 25 pieces
Lieske Part No.: 722654

Double-deck terminal, feed-through/feed-through terminal, L/L, without label holder, suitable for Ex e II applications, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1139817

Double-deck terminal, feed-through/feed-through terminal, N/L, without label carrier, suitable for Ex e II applications, conductor entry EG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1950198

Double-deck terminal, feed-through/feed-through terminal, L/N, without label carrier, suitable for Ex e II applications, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1950199

Double-deck terminal, feed-through/feed-through terminal, N/N, without label holder, suitable for Ex e II and Ex i applications, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1263337

Double-deck terminal, 4-conductor protective conductor terminal, 2.5 mm², PE, suitable for Ex e II applications, without label carrier, internally bridged, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1876953

Double-deck terminal, 4-conductor protective conductor terminal, 2.5 mm², PE, suitable for Ex e II applications, without label carrier, internally bridged, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1951596

Double-deck terminal, 4-conductor feed-through terminal, L, without label carrier, suitable for Ex e II applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1950200

Double-deck terminal, 4-conductor feed-through terminal, N, without label carrier, suitable for Ex e II and Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1950201

Double-deck terminal, protective conductor/through terminal, 2.5 mm², PE/N, suitable for Ex e II applications, without label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1950202

Double-deck terminal, protective conductor/through terminal, 2.5 mm², PE/L, suitable for Ex e II applications, without label carrier, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1950203

End plate, 0.8 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 1876957

End plate, 0.8 mm thick, orange
Sales unit: 25 pieces
Lieske Part No.: 1139816

Double-deck terminal, 4-conductor feed-through terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1951597

Double-deck double-disconnect terminal, L/L, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1947529

Double-deck double disconnect terminal with 2 pivoting disconnect blades Housing colour grey grey
Sales unit: 50 pieces
Lieske Part No.: 907345

Double-deck double disconnect terminal, with 2 pivoting disconnect blades, N/L, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1313089

Double-deck double disconnect terminal, with 2 pivoting disconnect blades, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1967211

Double-deck double disconnect terminal, with 2 pivoting disconnect blades, ground and upper floors bridged internally on the right, L/L, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1967387

Double-deck double disconnect terminal, with 2 pivoting disconnect blades, ground and upper floors bridged internally on the right, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1967292