Installation Material from WAGO

N-disconnect terminal blocks
for DIN 35 rail, blue, 400 V
Width: 5 mm
Rated current: 24 A
Rated cross-section: 2.5 mm ² Type: 780-613


Quantity: 1 unit.
Lieske Part No.: 580706

3-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 600505

3-conductor protective conductor terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 490861

3-conductor protective conductor terminal, 2.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1964264

3-conductor shield terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², white
Sales unit: 50 pieces
Lieske Part No.: 1963933

3-conductor feed-through terminal 2.5 mm² suitable for Ex i applications central labelling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® blue
Sales unit: 50 pieces
Lieske Part No.: 861072

3-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 553002

2-conductor feed-through terminal, 2.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light gray
Sales unit: 50 pieces
Lieske Part No.: 1964265

3-conductor feed-through terminal, 2.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light gray
Sales unit: 50 pieces
Lieske Part No.: 1964266

Box jumper insulated from 1 to 2 pitch 6 mm grey
Sales unit: 25 pieces
Lieske Part No.: 340795

Staggered jumper, isolated on gray Design: of
3 to Terminal cross-section: 4 mm ² current: 32 A Type: 78
-453 item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 902564

Staggered jumper
, isolated on gray
execution: from 1 to 4
Terminal cross-section: 4 mm ²
Current: 32 A

Type: 781-454
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 578910

Staggered jumper
isolated on gray
Execution: from 1 to 5
Terminal cross-section: 4 mm ²
Current: 32 A

Type: 781-455
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 345953

Staggered jumper, isolated on gray Design: of
on 6 Terminal cross-section: 4 mm ² current: 24 A Type: 78
-456 item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 844078

Through terminals through terminals, gray, for DIN 35 rail, 8 V Width: 6 mm Rated current: 32 A Rated cross-section: 4 mm ² Type: 78
-6
Sales unit:
ST.
Sales unit: 50 pieces
Lieske Part No.: 750342

Through terminals through terminals, blue Width: 6 mm Rated current: 32 A Rated cross-section: 4 mm ² Type: 78
-6 4 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 749822

PE terminals - Terminals 2 wire protection
for TS 35 rail, green-yellow
Width: 6 mm
Rated cross-section: 4 mm ²

Type: 781-607
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 383955

2-wire protective conductor terminal suitable for Ex e II applications green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1964267

N-disconnect terminal blocks
for mounting rail TS 35, Blue, 400 V
Width: 6 mm
Rated current: 32 A
Rated cross-section: 4 mm ²

Type: 781-613
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 431995

1-conductor equipotential bonding terminal, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 680023

3-conductor feed-through terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 626084

3-conductor protective conductor terminal, 4 mm², central labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², green-yellow
Lieske Part No.: 957542

3-conductor protective conductor terminal, 4 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1964268

2-conductor N-disconnect terminal, 4 mm², CAGE CLAMP®, 4.00 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 446281

3-conductor feed-through terminal 4 mm² suitable for Ex i applications central labelling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® blue
Sales unit: 50 pieces
Lieske Part No.: 938976

2-conductor equipotential bonding terminal, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 300485

2-conductor feed-through terminal, 4 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², light gray
Sales unit: 50 pieces
Lieske Part No.: 549222

3-conductor feed-through terminal, 4 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², light gray
Sales unit: 50 pieces
Lieske Part No.: 1964269

Switch lock for securing the cutting carriage, lockable for series 782/784/783/785 orange
Sales unit: 25 pieces
Lieske Part No.: 343358

End and intermediate plate
orange, 1.5 mm thick
Version: for terminals: 782-601/604/607/613, 784-601/604/607/613

Type: 782-317
Quantity: 1 unit.
Lieske Part No.: 453320

Accessories for top job IEK terminals and terminals busbar support rail TS 35, blue,
, 5 mm thick Finish: For terminals: 782-6
3, 784-6
Type 3: 782-32
Sales unit:
ST.
Sales unit: 25 pieces
Lieske Part No.: 798434

Through terminals
Through terminals, gray
for mounting rail TS 35, 800 V
Width: 8 mm
Rated current: 41 A
Rated cross-section: 6.0 mm ²

Type: 782-601
Quantity: 1 unit.
Lieske Part No.: 171256

Through terminals
Through terminals, blue
Width: 8 mm
Rated current: 41 A
Rated cross-section: 6.0 mm ²

Type: 782-604
Quantity: 1 unit.
Lieske Part No.: 333826

PE terminals - 2 terminals for conductor protection DIN 35 rail, green-yellow Width: 8 mm Rated cross-section: 6 mm ² Type: 782-6 7 item:
ST.
Lieske Part No.: 801178

2-conductor protective conductor terminal, 6 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 6.00 mm², green-yellow
Sales unit: 25 pieces
Lieske Part No.: 1964270

N-disconnect terminal blocks for DIN 35 rail, blue, 4 V Width: 8 mm Current Rating: 4
A Rated cross-section: 6 mm ² Type: 782-6
3 item:
ST.
Sales unit: 25 pieces
Lieske Part No.: 936661

1-conductor equipotential bonding terminal, 6 mm², CAGE CLAMP®, 6.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 569067

2-conductor feed-through terminal, 6 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 6.00 mm², light gray
Sales unit: 50 pieces
Lieske Part No.: 1964271

End and intermediate plate
orange, 1.5 mm thick
Finish: For terminals: 783-601/604/607/613 Type: 783-317


Quantity: 1 unit.
Lieske Part No.: 412723

Accessories for top job IEK terminals and terminals
Busbar support
for DIN rail 35 blue, 1.5 mm thick
Finish: For terminals: 783-613 Type: 783-321


Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 672178

Through terminals
through terminals, gray
for mounting rail TS 35, 800 V
Width: 12 mm
Rated current: 76 A
Rated cross-section: 16.0 mm ² Type: 783-601


Quantity: 1 unit.
Lieske Part No.: 137406

Through terminals through terminals, blue width:
2 mm Rated current: 76 A Rated cross-section:
6 mm ² Type: 783-6 4 item:
ST.
Lieske Part No.: 849642

PE terminals - 2 terminals for conductor protection DIN 35 rail, green-yellow width:
2 mm Rated cross-section:
sqmm Type: 783-6 7 item:
ST.
Lieske Part No.: 902968

2-wire protective conductor terminal suitable for Ex e II applications green-yellow
Sales unit: 25 pieces
Lieske Part No.: 378827

N-disconnect terminal blocks
for mounting rail TS 35, Blue, 400 V
Width: 12 mm
Rated current: 68 A
Rated cross-section: 10 mm ²

Type: 783-613
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 342651

1-conductor equipotential bonding terminal, 16 mm², CAGE CLAMP®, 16.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 257831

2-conductor feed-through terminal, 16 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 16.00 mm², light gray
Sales unit: 25 pieces
Lieske Part No.: 1939492

Through terminals
Through terminals, gray
for mounting rail TS 35, 800 V
Width: 10 mm
Rated current: 57 A
Rated cross-section: 10.0 mm ² Type: 784-601


Quantity: 1 unit.
Lieske Part No.: 179956

Through terminals
Through terminals, blue
Width: 10 mm
Rated current: 57 A
Rated cross-section: 10.0 mm ² Type: 784-604


Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 666283

PE terminals - 2 wire protection terminals
for DIN 35 rail, green-yellow
Width: 10 mm
Rated cross-section: 8 mm ² Type: 784-607


Quantity: 1 unit.
Lieske Part No.: 117318