Accessories from Vossloh-Schwabe

G 13 versions, IP67 / IP54
Dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone seal
with Push-17.6 x 25.5 mm
Type: T 8 (26 mm)

Type: 108973
Quantity: 1 unit.
Lieske Part No.: 326153

G
3 sockets, IP67 / IP54 dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone gasket with Push-
7.6 x 25.5 mm Type: T
2 (38 mm) Type:
8974 Quantity:
ST.
Lieske Part No.: 872823

G13 double sockets, protection class IP67 With plug-in foot for cut-out 17.6x25.5mm Locking lugs for wall thickness 1 4-2mm for lamps D26mm Material: PC, white, inner part: PBT GF, T140 Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lamps of protection class I or II Weight: 68g Type: 16401 Material: Plastic Design: Double socket, fastening type: plug-in fastening Socket: G13 Color: white With starter holder: No
Lieske Part No.: 215481

G13 double sockets, protection class IP67 With plug-in foot for cut-out 17.6x25.5mm Locking lugs for wall thickness 1.4-2mm for lamps D38mmmMaterial: PC, white, inner part: PBT GF, T140Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lamps of protection class I or II Weight: 77g Type: 16402, Socket: G13, Mounting type: Plug-in mounting, Design: Double socket, Material: Plastic, With starter holder: No, Color: white
Lieske Part No.: 643738

G13 double sockets, protection class IP67 With plug-in foot for cut-out 17.6x25.5mm Locking lugs for wall thickness 1.4-2mm for protective tubes D50mmmMaterial: PC, white, inner part: PBT GF, T140Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lights of protection class I or II Weight: 125g Type: 16403, Material: Plastic, Socket: G13, Design: Double socket, Mounting type: Plug-in mounting, With starter holder: No, Color: white
Lieske Part No.: 828161

Clip-on caps, white For one-piece E27 sockets Material: PA GF Round hole: D10.5mm Anti-twist cross groove: outside Through holes for M4 screws Weight: 5.4g Type: 97511 Socket: E27, Material: Plastic Fastening type: Screw fastening Design: Edison socket Color: white With starter holder: No
Lieske Part No.: 472370

Snap-on caps, black For one-piece E27 sockets Material: PA GF Round hole: D10.5mm Anti-twist cross groove: outside Through holes for M4 screws Weight: 5.5g Type: 97511, Color: black Material: plastic Socket: E27 Version: Edison socket Fastening type: screw fastening With starter holder: No
Lieske Part No.: 958350

Clip-on cap, white For one-piece E27 sockets Material: PA GF Nipple thread: M10x1 Weight: 9.6g Type: 85070, Design: Edison socket, Nipple thread: M10x1, Fastening type: Screw fastening, Socket: E27, Material: Plastic, Color: white, With starter holder: No
Lieske Part No.: 114536

Clip-on cap, white For one-piece E14 sockets Material: PA GF Nipple thread: M10x1 Weight: 7.6g Type: 85075 Nipple thread: M10x1 Design: Edison socket Fastening type: Screw fastening Material: Plastic Socket: E14 Color: white With starter holder: No
Lieske Part No.: 958351

Snap-on cap, black For one-piece E14 sockets Material: PA GF Nipple thread: M10x1 Weight: 8.8g Type: 85075 Colour: black Socket: E14 Material: Plastic Fastening type: Screw fastening Nipple thread: M10x1 Version: Edison socket With starter holder: No
Lieske Part No.: 1316152

Clip-on cap, white For one-piece E14 sockets Material: PA GF Profile hole: D10.5x8.6mm Through holes for M3 screws Weight: 4.4g Type: 97635, Nipple thread: without, Material: Plastic, Socket: E14, Design: Edison socket, Fastening type: Screw fastening, Color: white, With starter holder: No
Lieske Part No.: 793007

Clip-on cap, white roof shape For one-piece E27 sockets With integrated strain relief For cables H03VV-F 2x0.5 or H03VV-F 2x0.75m Material: PA GF Weight: 10.6g Type: 83282, Material: Plastic, Socket: E27, Design: Edison socket, Fastening type: Screw fastening, With starter holder: No, Color: white
Lieske Part No.: 100567

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E
4 Ø, 43 mm height
5 mm Colour: black Type:
9
62 Quantity:
ST.
Lieske Part No.: 715391

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E
4 Ø, 43 mm height
5 mm Color: brass color type:
9
64 Quantity:
ST.
Lieske Part No.: 891887

Plastic screw rings, black For E14 sockets D34mm, height: 7.5mm Type: 05202, With starter holder: No, Socket: E14, Material: Plastic, Color: black, Nipple thread: without, Fastening type: Screw fastening, Design: Edison socket
Lieske Part No.: 393676

2G7 plug-in socket Housing: PBT GF, white, T140, nominal value: 2/250 Double plug-in terminals: 0.5-1qmm (lamp circuit) Single plug-in terminals: 0.5-1qmm (starter circuit) Rear hole for self-tapping screw in accordance with ISO 1481/7049-ST4, 2-C/F Front through holes for M3 screws Socket locking by 15° rotation Weight: 13.7g Type: 35610 Material: Plastic Design: Plug-in socket Socket: 2G7 Mounting type: Screw fastening Color: white With starter holder: No
Lieske Part No.: 941385

Lampholders for compact fluorescent lamps
2 G 7 versions
for 11W TC-SEL 5.7 and Anschraubfuß with back and side holes for self-tapping screws
Version: Anschraubfuß

Type: 109238
Quantity: 1 unit.
Lieske Part No.: 257323

2G7 surface-mounted socket Housing: PBT GF, white, T140, nominal value: 2/250 Double plug-in terminals: 0.5-1qmm (lamp circuit) Single plug-in terminals: 0.5-1qmm (starter circuit) Rear hole for self-tapping screws in accordance with ISO 1481/7049-ST4, 2-C/F Front through holes for M3 screws Weight: 14g Type: 35612 Socket: 2G7 Material: Plastic Design: Surface-mounted socket Fastening type: Screw fastening Color: white With starter holder: No
Lieske Part No.: 638242

Clamping nipple For cables H03VV-F and H03VVH2-F 2X0.5 or 2X0.75m Material: PA Threaded attachment: M10x1 Length: 11mm With locking screw Weight: 1.6g Nipple thread: M10x1 Fastening type: screw fastening, Material: plastic Version: other Color: white
Lieske Part No.: 878291

Nipple for E14 caps with molded thread: M10x1 Cross groove: external material: PA, white Thread attachment: M10x1, with hexagon collar Weight: 0.5g Length: 10mm, Design: connection element and socket, nipple thread: M10x1, Fastening type: screw fastening, Material: plastic, Socket: E14, Color: white, With starter holder: No
Lieske Part No.: 450835

Clamping nipple for cables H03VV-F and H03VVH2-F 2X0.5 or 2X0.75m Material: PA Threaded attachment: M10x1 Length: 11mm With locking screw Weight: 1.5g Type: 09701, Fastening type: screw fastening, Nipple thread: M10x1, Material: plastic, Design: other, Color: black
Lieske Part No.: 1262446

Lampholders for mains voltage halogen lamps R7s sockets aluminum, M3 screws through holes, temperature concentration camp. T3 Usable cable length 35 mm Type: Line
, Mm ² Type:
9265
ST.
Lieske Part No.: 960579

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E 27 Ø, 55 mm height
5 mm Colour: black Type:
9285
ST.
Lieske Part No.: 505531

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E 27 Ø, 55 mm height
5 mm Color: brass color Type:
9289 Quantity:
ST.
Lieske Part No.: 829628

G13 push-through sockets for lamps T8 and T12 Light point height: 23mm with cams Housing: PC, white, Front plate: PBT GF, white T140, Nominal value: 2/500 Plug-in terminals: 0.5-1qmm Side locking lugs for wall thickness 0.4-2mm Weight: 6g Type: 27700, With starter holder: No, Design: Push-through socket, Fastening type: Plug-in fastening, Socket: G13, Material: Plastic, Color: white
Lieske Part No.: 784714

G13 push-through sockets for lamps T8 and T12 Light point height: 23mm without cams Housing: PC, white, Front plate: PBT GF, white T140, Nominal value: 2/500 Plug-in terminals: 0.5-1qmm Side locking lugs for wall thickness 0.4-2mm Weight: 6g Type: 27701, Design: Push-through socket, Mounting type: Plug-in mounting, Socket: G13, Material: Plastic, With starter holder: No, Color: white
Lieske Part No.: 578699

E14 sockets, for push-on caps, smooth casing, black Housing: PET GF, T210, nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 11.4g Type: 64001 Mounting type: plug-in mounting Design: Edison socket, socket: E14 Material: plastic Color: black With starter holder: No
Lieske Part No.: 661336

E14 sockets, for push-on caps, black External thread 28x2 IEC 60399 Housing: PET GF, T210, nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 12.2g Type: 64101 Mounting type: Plug-in mounting Design: Edison socket Socket: E14 Material: Plastic Color: black With starter holder: No
Lieske Part No.: 872708

E14 sockets, for push-on caps, white External thread 28x2 IEC 60399 Housing: PET GF, T210, Nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 12.5g Type: 64101, Material: Plastic, Socket: E14, Mounting type: Plug-in mounting, Design: Edison socket, With starter holder: No, Color: white
Lieske Part No.: 405019

Snap-on caps for GU10, GZ10 sockets Material: PA GF, black molded thread M8x1 Mounting holes for screws M3 Weight: 3.8g Type: 97243, Design: other, Socket: other, Material: plastic, Color: black, Nipple thread: other, Fastening type: screw fastening, With starter holder: No
Lieske Part No.: 702894

Snap-on caps for GU10, GZ10 sockets type 310mMaterial: PA GF, black molded thread: M10x1 mounting holes for M3 screws Weight: 3.4g Type: 97244, Color: black, Socket: other, Version: other, Material: plastic, Fastening type: screw fastening, Nipple thread: M10x1, With starter holder: No
Lieske Part No.: 313206

E27 sockets, for plug-on caps, external thread 40x2.5 IEC 60399, black Housing: PET GF, T210 Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M4 screws Weight: 18.8g Type: 64501, Socket: E27, Nipple thread: other, Material: plastic, Color: black, Fastening type: screw fastening, Design: Edison socket, With starter holder: No
Lieske Part No.: 740430

E27 sockets, one-piece, for plug-in caps, external thread 40x2.5 IEC 60399, housing: PET GF, T210 nominal value: 4/250 double plug-in terminals: 0.5-2.5qmm through holes for M4 screws brass-colored, design: plug-in socket, material: plastic, socket: E27, color: brass, fastening type: screw fastening, with starter holder: no
Lieske Part No.: 1316151

Clip-on cap, black Roof shape For one-piece E27 sockets With integrated strain relief For cables H03VV-F 2X0.5 or H03VV-F 2X0.75, material: PA GF Weight: 10.5g Type: 83282 Fastening type: Plug-in fastening Design: Edison socket Colour: black Nipple thread: without Socket: E27 Material: Plastic With starter holder: No
Lieske Part No.: 348451

Partially covered R7s socket Housing: Ceramic, T350 Contact bolt: Cu, silver tip Nominal value: 8/250 Slotted holes for M4 screws Central hole for M5 screw Contact spacing: 114.2mm, Fastening type: Screw fastening, Material: Ceramic/metal, Color: other, Socket: R7s, Design: Plug-in socket, Nipple thread: without, With starter holder: No
Lieske Part No.: 214598

Lamp holder for lamps D16mm Material: PC, white, UV-stabilized Through hole for countersunk screw M3 Hole for self-tapping screw according to ISO 1481/7049-ST4, 2-C/F Weight: 1g Type: 84000, Nipple thread: without Material: plastic Socket: other Design: connection element and socket, Fastening type: screw fastening With starter holder: No Color: white
Lieske Part No.: 125401

Snap-on caps For attaching to sockets type 333, molded thread: M10x1, external thread 20, 8x2m Material: LCP, natural Weight: 3.8g Type: 97255, Material: plastic, Design: other, Socket: G4/GX5, 3/G63.35 Nipple thread: M10x1, Color: white
Lieske Part No.: 242205

Snap-on caps For attaching to sockets 109547 molded thread M8x1 external thread 20, 8x2m Material: LCP, natural Weight: 4g Type: 97256, Socket: G4/GX5, 3/G6.35 Fastening type: screw fastening, Design: other, Nipple thread: other, Material: plastic, Color: white, With starter holder: No
Lieske Part No.: 156197

GU4 lamp retaining spring material: stainless steel For attaching to sockets 109547 Weight: 0.8g Type: 94095, Material: Steel, Color: Chrome, Socket: G4/G6, 35, Fastening type: Plug-in fastening, Design: Connection element and socket, With starter holder: No
Lieske Part No.: 645240

GU5.3 lamp retaining spring material: stainless steel For attaching to sockets 109547 Weight: 1.1g Type: 94096, Material: Steel, Color: Chrome, Version: Other, Socket: Other, Fastening type: Plug-in fastening, With starter holder: No
Lieske Part No.: 694962

Snap-on cap, black For one-piece E14 sockets Material: PA GF Molded thread: M10x1 Anti-twist cross groove: outside Weight: 2.7g Type: 97636 Socket: E14 Material: Plastic Color: black, nipple thread: M10x1 Version: Edison socket Fastening type: screw fastening With starter holder: No
Lieske Part No.: 199017

Snap-on cap, white Material: PA GF Moulded thread: M10x1 Cross groove: outside Weight: 4.4g Type: 97665, With starter holder: No Design: Connection element and socket Fastening type: Screw fastening, nipple thread: M10x1 Socket: E27 Material: Plastic Colour: white
Lieske Part No.: 238593

Snap-on cap, black material: PA GF molded thread: M10x1 cross groove: outside weight: 4.6g type: 97665, color: black, material: plastic, socket: E27, fastening type: screw fastening, nipple thread: M10x1, design: Edison socket, with starter holder: no
Lieske Part No.: 281822

Lamp holder for T lamps for T5 lamps steel, bright zinc plated through hole for screw M3, Version 5: T 6 (
6 mm) Type:
9685
ST.
Lieske Part No.: 715295

Starter holder material: PC, white, T110, nominal value: 2/250 Single plug-in terminals: 0.5-1qmm, single-wire Rear split pins for wall thickness up to 1.2mm Side split pins for wall thickness up to 1mm Split pin connection starter holder rear/luminaire body: IP40 Weight: 3.7g Type: 43210 Mounting type: plug-in mounting Socket: other Material: plastic Version: plug-in socket Color: white With starter holder: yes
Lieske Part No.: 303849

Edison sockets E
4 thermoplastic sockets rated value 2/25, flumes coat sleeve lock E
4 candles versions rated value 2/25, foot galvanized nipple with thread M
x
Model: height 65 mm type:
98
3 item:
ST.
Lieske Part No.: 875231

Edison lampholders
E14 thermoplastic lampholders
rated value 2/250, flumes coat sleeve lock
E 14 candles versions
rated value 2/250, foot galvanized nipple with thread M 10 x 1
Model: height 85 mm type: 109814


Quantity: 1 unit.
Lieske Part No.: 599443

Edison sockets E
4 thermoplastic sockets rated value 2/25, flumes coat sleeve lock E
4 candles versions rated value 2/25, foot galvanized nipple with thread M
x
Model: height
mm Type:
98
5 item:
ST.
Lieske Part No.: 806245

Socket terminals Material: Porcelain Socket: E27 Color: white
Lieske Part No.: 599891

SP 230/10 K luminaire protection module
For electronic control gear
When operating electronic components in lighting, it is often necessary to provide increased protection for the components against voltage peaks.
These overvoltages, also known as transients, can have a variety of causes.
They can occur when switching inductive loads or through atmospheric discharges such as lightning strikes in the network or soil.
They can also be caused by induced voltages from neighboring cables in phase control.
The protection module reduces the overvoltage at the connection terminal of the electronic components. The remaining residual voltage is reduced to an appropriate protection level
depending on the discharge current . Max. permissible housing temperature: 80°C Min. permissible ambient temperature: -30 °C Suitable for luminaires of protection class II Dimensions: 32 x 22 x 13 mm Weight: 20 g Connection: wires, solid, length: 50 mm
Lieske Part No.: 340509