Installation Material from Schneider Electric

This contact protection prevents access to the insertion contacts in the plug-in cassette when the MasterPact MTZ2 is removed. Suitable for plug-in cassette MTZ2 800/4000A 3-pole. Spare part.
Lieske Part No.: 1867086

This contact protection prevents access to the insertion contacts in the plug-in cassette when the MasterPact MTZ3 is removed. Suitable for plug-in cassette MTZ3 4000/6300A 3-pole. Spare part.
Sales unit: 2 pieces
Lieske Part No.: 1867087

This contact protection prevents access to the insertion contacts in the plug-in cassette when the MasterPact MTZ2 is removed. Suitable for plug-in cassette MTZ2 800/4000A 4-pole. Spare part.
Lieske Part No.: 1867081

This contact protection prevents access to the insertion contacts in the plug-in cassette when the MasterPact MTZ3 is removed. Suitable for plug-in cassette MTZ3 4000/6300A 4-pole. Spare part.
Lieske Part No.: 1867089

This function provides measured values (energy measurement class 1, electrical measurement data, circuit breaker status) over Ethernet in accordance with IEC 61850 MMS communication protocol. An IFE or EIFE communication interface is required.
Lieske Part No.: 1869463

Transparent cover for Micrologic X spare part for retrofitting or repair.
Lieske Part No.: 1867080

The mobile power pack is a rechargeable energy storage device. It supplies the Micrologic X with a 5V voltage via a USB cable. It can be charged using a USB cable via any USB interface.
Lieske Part No.: 1867091

Integrated power supply VPS for the Micrologic X control and trip unit. The VPS supplies the Micrologic X via an internal connection on the busbar. The maximum operating voltage of the installation must not exceed 600VAC. Can be retrofitted as a spare part.
Lieske Part No.: 1867093

With this kit, the plug-in cassette of a MasterPact NW can be converted to accommodate a MasterPact MTZ2/3. The kit contains instructions and a sticker with the new terminal assignment on the plug-in cassette.
Lieske Part No.: 1869442

With this kit, the plug-in cassette of a MasterPact NT can be converted to accommodate a MasterPact MTZ1. The kit contains instructions and a sticker with the new terminal assignment on the plug-in cassette.
Lieske Part No.: 1869434

USB CABLE (miniUSB/USB) MICROLOGIC X.
Lieske Part No.: 1867094

Blank cover for installation slot when internal power supply VPS is removed from MicroLogic X - spare part.
Lieske Part No.: 1869435

Entry contact for retrofitting a MasterPact NT/NW and MTZ123 plug-in cassette.
Lieske Part No.: 1869437

Locking device in OFF position with cylinder lock on the MasterPact MTZ1. Consisting of:. Profalux locking of the MasterPact MTZ2/3 in OFF position Profalux 1 lock with 1 key + adjustment set.
Lieske Part No.: 1867073

Locking device in OFF position with cylinder lock on the MasterPact MTZ1. Consisting of:. Profalux locking of the MasterPact MTZ2/3 in OFF position Profalux 2 locks with 2 keys + adjustment set.
Lieske Part No.: 1867270

Locking device in OFF position with cylinder lock on the MasterPact MTZ1. Consisting of:. Profalux locking of the MasterPact MTZ1 in OFF position Profalux 2 locks with 2 different keys + adaptation set.
Lieske Part No.: 1867066

Locking device in OFF position with cylinder lock on the MasterPact MTZ2/3. Consisting of: 1 lock with 1 key + adjustment set. Made by RONIS.
Lieske Part No.: 1867067

Locking device in OFF position with cylinder lock on the MasterPact MTZ2/3. Consisting of: 2 locks with 2 keys + adjustment set. Made by RONIS.
Lieske Part No.: 1867068

Locking device in OFF position with cylinder lock on the MasterPact MTZ2/6. Consisting of: 2 locks with 2 different keys + adjustment set. Made by RONIS.
Lieske Part No.: 1867069

Locking of the MasterPact MTZ2/3 insert cassette in the disconnected position. Consists of Profalux 1 lock + 1 key + MTZ2/MTZ3 adaptation set. Can be ordered for retrofitting.
Lieske Part No.: 1869438

Locking of the MasterPact MTZ2/3 insert cassette in the disconnected position. Consists of Profalux 2 locks + 1 key + MTZ2/MTZ3 adaptation set. Can be ordered for retrofitting.
Lieske Part No.: 1869439

Locking of the MasterPact MTZ2/3 insert cassette in the disconnected position. Profalux key lock consisting of 2 locks with 2 different keys and an adaptation set. For retrofitting.
Lieske Part No.: 1869451

Locking of the MasterPact MTZ2/3 insert cassette in the disconnected position. Ronis key lock consisting of 2 locks with 2 different keys and an adaptation set. For retrofitting.
Lieske Part No.: 1869441

Locking of the MasterPact MTZ2/3 insert cassette in the disconnected position. Consists of Ronis 1 lock + 1 key + MTZ2/MTZ3 adaptation set. Can be ordered for retrofitting.
Lieske Part No.: 1869158

Locking of the MasterPact MTZ2/3 drawer cassette in the disconnected position. Consists of 2 Ronis locks + 1 key + MTZ2/MTZ3 adapter set. Can be ordered for retrofitting.
Lieske Part No.: 1869443

Locking VPOC insert cassette MTZ2/3 operation door opened.
Lieske Part No.: 1867070

Accessory for terminal block on MasterPact MTZ cassette. Cover of the accessory connection terminals MasterPact MTZ3 4000/6300A 3P spare part.
Lieske Part No.: 1867082

M8 Combiplas sliding nut for C-shaped rail 40 mm (type C40) - Delivery: 50 units.
Lieske Part No.: 1869093

M4 standard nut for vertical aluminum rails - Scope of delivery: 100 pieces.
Lieske Part No.: 1869581

100 screws S3D for cable entry plate.
Lieske Part No.: 1859455

Terminal block accessory for Linergy TR products. It is an end clamp with a width of 5.2 mm for 35 mm DIN rails. It is markable with NSYTRABF5. Strip.
Sales unit: 50 pieces
Lieske Part No.: 1586553

Linergy NSYTR end stop for terminal block. It is compatible with the TRV screw terminal, TRH IDC, TRP Push-In and TRR spring terminal. It has a gray surface treatment. Fastening by screws. Sold in batches of 50 units. It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1767823

Sales unit: 10 pieces
Lieske Part No.: 1087266

Insertable marking strip, 5mm, 10 positions 91, 100, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852482

Marking accessory for Linergy TR products. It is a 5 mm wide labeling tape for NSYTRV terminal blocks. It consists of 10 consecutive numbers from 1 to 11 printed horizontally. It is compatible with all 2.5 mm² and 5.2 mm wide terminal blocks. It is also compatible with 10 mm² terminal blocks with 2 marking elements for 1 terminal.
Sales unit: 10 pieces
Lieske Part No.: 1852468

Insertable marking strip, 5mm, 10 positions 21, 30, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852480

Insertable marking strip, 5mm, 10 positions 31, 40, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852479

Insertable marking strip, 5mm, 10 positions 41, 50, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852478

Insertable marking strip, 5mm, 10 positions 51, 60, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852477

Insertable marking strip, 5mm, 10 positions 61, 70, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852476

Insertable marking strip, 5mm, 10 positions 71, 80, printed horizontally, white.
Sales unit: 10 pieces
Lieske Part No.: 1852475

Insertable marking strip, 5mm, 10 positions 81, 90, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852474

Insertable marking strip, 6mm, 10 positions 1, 10, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852473

Insertable marking strip, 6mm, 10 positions 91, 100, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852472

Insertable marking strip, 6mm, 10 positions 11 to 20, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852471

Insertable marking strip, 6mm, 10 positions 31, 40, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852439

Insertable marking strip, 6mm, 10 positions 41 to 50, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852483

Insertable marking strip, 6mm, 10 positions 51, 60, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852396

Insertable marking strip, 6mm, 10 positions 61, 70, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852409

Insertable marking strip, 6mm, 10 positions 71, 80, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852408