Installation Material from Lapp

Locknut SKINTOP® GMP-GL-M 63X1.5 RAL 9005 BK, locknut, M 63, wrench size: 75mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without a thread that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: The contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification in accordance with technical data enables the product to be used in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Sales unit: 25 pieces
Lieske Part No.: 848187

Locknut SKINTOP® GMP-HF-M 12X1.5 RAL7035 LGY, locknut, M 12, wrench size: 17mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 1242740

Locknut SKINTOP® GMP-HF-M 16X1.5 RAL7035 LGY, locknut, M 16, wrench size: 22mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 443017

Locknut SKINTOP® GMP-HF-M 20X1.5 RAL7035 LGY, locknut, M 20, wrench size: 27mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 443020

Locknut SKINTOP® GMP-HF-M 25X1.5 RAL7035 LGY, locknut, M 25, wrench size: 34mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 443021

Locknut SKINTOP® GMP-HF-M 32X1.5 RAL7035 LGY, locknut, M 32, wrench size: 41mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no drop formation
Sales unit: 100 pieces
Lieske Part No.: 443027

Locknut SKINTOP® GMP-HF-M 40X1.5 RAL7035 LGY, locknut, M 40, wrench size: 50mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 25 pieces
Lieske Part No.: 443043

Locknut SKINTOP® GMP-HF-M 50X1.5 RAL7035 LGY, locknut, M 50, wrench size: 60mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 25 pieces
Lieske Part No.: 443046

Locknut SKINTOP® GMP-HF-M 63X1.5 RAL7035 LGY, locknut, M 63, wrench size: 75mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no drop formation
Sales unit: 25 pieces
Lieske Part No.: 1243074

Multiple sealing insert SKINTOP® DIX-M 16220, Multiple sealing insert, M 16, Number of cable entries: 2 pieces, Bore diameter: 2 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 440611

Multiple sealing insert SKINTOP® DIX-M 16230, Multiple sealing insert, M 16, Number of cable entries: 2 pieces, Bore diameter: 3 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 458480

Multiple sealing insert SKINTOP® DIX-M 16240, Multiple sealing insert, M 16, Number of cable entries: 2 pieces, Bore diameter: 4 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 644436

Multiple sealing insert SKINTOP® DIX-M 16420, Multiple sealing insert, M 16, Number of cable entries: 4, Bore diameter: 2mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 467782

Multiple sealing insert SKINTOP® DIX-M 20250, Multiple sealing insert, M 20, Number of cable entries: 2 pieces, Bore diameter: 5 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 824545

Multiple sealing insert SKINTOP® DIX-M 20340, Multiple sealing insert, M 20, Number of cable entries: 3, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 757790

Multiple sealing insert SKINTOP® DIX-M 20353, Multiple sealing insert, M 20, Number of cable entries: 3, Bore diameter: 5.3mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Lieske Part No.: 749569

Multiple sealing insert SKINTOP® DIX-M 20430, Multiple sealing insert, M 20, Number of cable entries: 4, Bore diameter: 3mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 740163

Multiple sealing insert SKINTOP® DIX-M 20920, Multiple sealing insert, M 20, Number of cable entries: 9, Bore diameter: 2mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 440613

Multiple sealing insert SKINTOP® DIX-M 25250, Multiple sealing insert, M 25, Number of cable entries: 2 pieces, Bore diameter: 5 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 1128807

Multiple sealing insert SKINTOP® DIX-M 25260, Multiple sealing insert, M 25, Number of cable entries: 2 pieces, Bore diameter: 6 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 474840

Multiple sealing insert SKINTOP® DIX-M 25360, Multiple sealing insert, M 25, Number of cable entries: 3, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 960836

Multiple sealing insert SKINTOP® DIX-M 25370, Multiple sealing insert, M 25, Number of cable entries: 3, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 934001

Multiple sealing insert SKINTOP® DIX-M 25450, Multiple sealing insert, M 25, Number of cable entries: 4, Bore diameter: 5mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 828285

Multiple sealing insert SKINTOP® DIX-M 25540, Multiple sealing insert, M 25, Number of cable entries: 5, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 504260

Multiple sealing insert SKINTOP® DIX-M 25640, Multiple sealing insert, M 25, Number of cable entries: 6, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 880375

Multiple sealing insert SKINTOP® DIX-M 32270, Multiple sealing insert, M 32, Number of cable entries: 2 pieces, Bore diameter: 7 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 440614

Multiple sealing insert SKINTOP® DIX-M 32280, Multiple sealing insert, M 32, Number of cable entries: 2 pieces, Bore diameter: 8 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 837359

Multiple sealing insert SKINTOP® DIX-M 32290, Multiple sealing insert, M 32, Number of cable entries: 2 pieces, Bore diameter: 9 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 440616

Multiple sealing insert SKINTOP® DIX-M 32370, Multiple sealing insert, M 32, Number of cable entries: 3, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 544542

Multiple sealing insert SKINTOP® DIX-M 32380, Multiple sealing insert, M 32, Number of cable entries: 3, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 442492

Multiple sealing insert SKINTOP® DIX-M 32460, Multiple sealing insert, M 32, Number of cable entries: 4, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 508180

Multiple sealing insert SKINTOP® DIX-M 32470, Multiple sealing insert, M 32, Number of cable entries: 4, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 751299

Multiple sealing insert SKINTOP® DIX-M 32560, Multiple sealing insert, M 32, Number of cable entries: 5, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 811245

Multiple sealing insert SKINTOP® DIX-M 32650, Multiple sealing insert, M 32, Number of cable entries: 6, Bore diameter: 5mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 657727

Multiple sealing insert SKINTOP® DIX-M 32840, Multiple sealing insert, M 32, Number of cable entries: 8, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 433758

Multiple sealing insert SKINTOP® DIX-M 32850, Multiple sealing insert, M 32, Number of cable entries: 8, Bore diameter: 5mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 901628

Multiple sealing insert SKINTOP® DIX-M 32940, Multiple sealing insert, M 32, Number of cable entries: 9, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 440689

Multiple sealing insert SKINTOP® DIX-M 40290, Multiple sealing insert, M 40, Number of cable entries: 2 pieces, Bore diameter: 9 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 440692

Multiple sealing insert SKINTOP® DIX-M 40310, Multiple sealing insert, M 40, Number of cable entries: 3, Bore diameter: 10mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 25 pieces
Lieske Part No.: 440697

Multiple sealing insert SKINTOP® DIX-M 40480, Multiple sealing insert, M 40, Number of cable entries: 4, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 678113

Multiple sealing insert SKINTOP® DIX-M 40490, Multiple sealing insert, M 40, Number of cable entries: 4, Bore diameter: 9mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 304598

Multiple sealing insert SKINTOP® DIX-M 40580, Multiple sealing insert, M 40, Number of cable entries: 5, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 168994

Multiple sealing insert SKINTOP® DIX-M 40590, Multiple sealing insert, M 40, Number of cable entries: 5, Bore diameter: 9mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 440701

Multiple sealing insert SKINTOP® DIX-M 40670, Multiple sealing insert, M 40, Number of cable entries: 6, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 188853

Multiple sealing insert SKINTOP® DIX-M 40860, Multiple sealing insert, M 40, Number of cable entries: 8, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 350890

Multiple sealing insert SKINTOP® DIX-M 40969, Multiple sealing insert, M 40, Number of cable entries: 9, Bore diameter: 6.9mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Lieske Part No.: 639759

Multiple sealing insert SKINTOP® DIX-M 50118, Multiple sealing insert, M 50, Number of cable entries: 11, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 1132694

Multiple sealing insert SKINTOP® DIX-M 50147, Multiple sealing insert, M 50, Number of cable entries: 14, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 466344

Multiple sealing insert SKINTOP® DIX-M 50164, Multiple sealing insert, M 50, Number of cable entries: 16, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 1230615

Multiple sealing insert SKINTOP® DIX-M 50166, Multiple sealing insert, M 50, Number of cable entries: 16 pcs., Bore diameter: 6.0 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 440702