Installation Material

WALTHER intermediate socket M20
made of nickel-plated brass
hexagon
Sales unit: 5 pieces
Lieske Part No.: 1918254

WALTHER intermediate socket M25
made of nickel-plated brass
hexagon
Lieske Part No.: 1918255

Sleeve housing for single locking system, cable entry straight version: 24-pin, M25 x 1, H. 76 Type: 717 667
Sales Unit: 1 ST.
Please in 10 units Order
Lieske Part No.: 433292

Sleeve housing for double locking latch, cable entry sideways version: 24-pin, M25 x 1, H. 76 Type: 717 668
Sales Unit: 1 ST.
Lieske Part No.: 433295

WALTHER adapter
brass adapter nickel-plated
with external thread metric
and internal thread PG from M32 to PG29
Lieske Part No.: 418471

WALTHER PE screw M4
for series B, BB, DD, MO, BV, D40 and D64
Sales unit: 10 pieces
Lieske Part No.: 2013460

WALTHER cable grommet
with cable diameter 11-12mm
from 10mm diameter
with strain relief through cable ties (max. 8mm wide)
Sales unit: 10 pieces
Lieske Part No.: 1581102

The fastening screw ensures secure contact between the conductor and the busbar.
Sales unit: 100 pieces
Lieske Part No.: 980225

Plug-in card holder for industrial applications to accommodate multiple 19' cards.
Lieske Part No.: 944742

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 497578

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 727583

Mounting rails, steel
Type: Perforated
Standard length: 2 meters

Type: TS15X5/LL2M/ST/ZN
Quantity: 1 MTR
Sales unit: 2 meters
Lieske Part No.: 273218

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 166463

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 292488

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 809025

Electronics housing in profile form for snapping onto a mounting rail.
Sales unit: 20 pieces
Lieske Part No.: 897818

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 20 pieces
Lieske Part No.: 817097

Electronics housing in profile form for snapping onto a mounting rail.
Sales unit: 20 pieces
Lieske Part No.: 869108

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 646543

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 647557

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 262546

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 100 pieces
Lieske Part No.: 658312

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 100 pieces
Lieske Part No.: 1581122

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 288190

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 250674

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 1203566

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 897711

The exterior of a lock washer resembles an open ring with three contact areas, which ensures high resistance to vibrations. The lock washer enables different components to be secured.
Sales unit: 100 pieces
Lieske Part No.: 622059

Holder for device markers for device identification. The holders can be attached using screws, glue or cable ties.
Lieske Part No.: 863982

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 468925

Socket for measurements on bridged terminal groups.
Sales unit: 50 pieces
Lieske Part No.: 969117

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 858532

Mounting feet are screwed to the wall, for example, in order to mount the support rails on them.
Sales unit: 10 pieces
Lieske Part No.: 240446

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 10 pieces
Lieske Part No.: 897684

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 770850

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 884391

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 801279

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 626371

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 801297

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 801302

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 200 pieces
Lieske Part No.: 433639

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 250 pieces
Lieske Part No.: 896143

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 735173

Mounting feet are screwed to the wall, for example, in order to mount the support rails on them.
Sales unit: 10 pieces
Lieske Part No.: 103349

Cover for terminals to protect against contact, dust and moisture.
Sales unit: 50 pieces
Lieske Part No.: 760484

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 330548

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 815634

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 505946

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 804445

PKH holder for receiving the Einzelmarkierer PK 2 / 4th
Length: 110 mm

Type: WPKH110HALTESTREIFEN
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 426008