Installation Material

Component terminal, 4 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962826

Component terminal, 4 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962827

Component terminal, 4 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 970383

Double feed-through terminal, 1.5 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 530705

Component terminal, 3 conductors, with diode 1N4007, anode left, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962828

Component terminal, 3 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962829

Component terminal, 3 conductors, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962830

Component terminal, 3 conductors, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962831

3-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², gray
Sales unit: 100 pieces
Lieske Part No.: 430681

3-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 239147

3-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 157373

3-conductor feed-through terminal 1.5 mm² suitable for Ex i applications central labelling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® blue
Sales unit: 100 pieces
Lieske Part No.: 155709

3-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 1962832

3-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 759727

3-wire front wiring, earthing terminals (center marking) Color: green yellow Width: 4 mm Cross Section: 8, -
, 5 mm ² Type: 279-687 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 782587

3-conductor protective conductor terminal, 1.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², green-yellow
Sales unit: 100 pieces
Lieske Part No.: 1963697

Component terminal, 4 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 393501

Component terminal, 4 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1962833

4-wire diode terminal with diode 1N4007 grey
Lieske Part No.: 757990

Component terminal, 4 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 353270

Double feed-through terminal, 1.5 mm², with double, central label holder, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 504124

4-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², gray
Sales unit: 100 pieces
Lieske Part No.: 976949

4-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 929013

4-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 512992

4-conductor feed-through terminal 1.5 mm² suitable for Ex i applications central labelling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® blue
Sales unit: 100 pieces
Lieske Part No.: 856191

4-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 827196

4-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 568787

4-conductor protective conductor terminal, 1.5 mm², central labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², green-yellow
Sales unit: 100 pieces
Lieske Part No.: 158970

4-conductor protective conductor terminal, 1.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², green-yellow
Sales unit: 100 pieces
Lieske Part No.: 1963698

4-conductor shield terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², white
Sales unit: 100 pieces
Lieske Part No.: 701540

2-wire front wiring, through terminals
(center marking)
cross section / mm ² 0.08 - 1.5
Color: gray
Width: 4 mm Type: 279-901


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 611577

2-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 1963918

2-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 955715

2-wire front wiring, through terminals
(Center marking)
Cross section / mm ² 0.08 - 1.5
Color: blue
Width: 4 mm

Type: 279-904
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 136254

2-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 128304

2-conductor feed-through terminal, 1.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 173416

2-wire front wiring, earthing terminals
(Center marking)
Conductor cross section: 0.08 - 1.5 mm ²
Color: green yellow
Width: 4 mm

Type: 279-907
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 218104

2-conductor protective conductor terminal, 1.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², green-yellow
Sales unit: 100 pieces
Lieske Part No.: 591419

Component terminal, 2 conductors, with diode 1N4007, anode left, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 589648

Component terminal, 2 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1231937

Double feed-through terminal, 1.5 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 100 pieces
Lieske Part No.: 1963699

4-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 100 pieces
Lieske Part No.: 1963700

2-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², light gray
Sales unit: 100 pieces
Lieske Part No.: 1963701

4-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², light gray
Sales unit: 100 pieces
Lieske Part No.: 1963703

Double feed-through terminal, 1.5 mm², suitable for Ex e II applications, with double, central label holder, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 100 pieces
Lieske Part No.: 1963704

2-conductor feed-through terminal, 2.5 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 403786

Type: 280-104

Sales unit: 100 pieces
Lieske Part No.: 940250

Type: 280-107

Sales unit: 100 pieces
Lieske Part No.: 224136

End and intermediate plate 2.5 mm thick grey
Sales unit: 25 pieces
Lieske Part No.: 709765

End and intermediate plate 2.5 mm thick orange
Sales unit: 25 pieces
Lieske Part No.: 246008