19 inch mounting material

Mounting Material from Rittal

Rittal 7445000 DK Data Rack distributor rack, WHD: 550x2121,8x750 mm, 45 U, RAL 7035 Material: Profile frame, base/plinth: Sheet steel Feet: Die-cast zinc Colour: Profile frame, base/plinth: RAL 7035 Trim panel, feet: RAL 5018 Supply includes: Torsionally stiff profile frame Stable ... Lieske Part No.: 238911 Mfg Part No: 7445000 Type: DK 7445.000

-7% 385,42 EUR 412,40 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7480035 DK Energy-Box, WHD: 482,6 (48,3 cm ( 19 inch ))x132,5x155 mm, max. 22 pitch units Depth-variable top hat rail for installed equipment to DIN 43 880 in sizes 1 – 3 (e.g. to accommodate flush-type socket outlets, circuit-breakers, etc.), cable clamping at the rear, one N and one PE ... Lieske Part No.: 125314 Mfg Part No: 7480035 Type: DK 7480.035

-7% 243,34 EUR 260,37 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Rittal 7507706 DK Mounting angles, 482.6 mm (48,3 cm ( 19 inch )), 6 U, For FlatBox L-shaped bracket as 2nd attachment level Material: Sheet steel, spray-finished Colour: RAL 7035 Supply includes: Assembly parts for fast, tool-free assembly. Note: The 2nd attachment level should ... Lieske Part No.: 359209 Mfg Part No: 7507706 Type: DK 7507.706

-7% 18,05 EUR 19,31 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7507709 DK Mounting angles, 482.6 mm (48,3 cm ( 19 inch )), 9 U, For FlatBox L-shaped bracket as 2nd attachment level Material: Sheet steel, spray-finished Colour: RAL 7035 Supply includes: Assembly parts for fast, tool-free assembly. Note: The 2nd attachment level should ... Lieske Part No.: 359211 Mfg Part No: 7507709 Type: DK 7507.709

-7% 21,06 EUR 22,53 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7507712 DK Mounting angles, 482.6 mm (48,3 cm ( 19 inch )), 12 U, For FlatBox L-shaped bracket as 2nd attachment level Material: Sheet steel, spray-finished Colour: RAL 7035 Supply includes: Assembly parts for fast, tool-free assembly. Note: The 2nd attachment level should ... Lieske Part No.: 359214 Mfg Part No: 7507712 Type: DK 7507.712

-7% 27,20 EUR 29,11 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7507715 DK Mounting angles, 482.6 mm (48,3 cm ( 19 inch )), 15 U, For FlatBox L-shaped bracket as 2nd attachment level Material: Sheet steel, spray-finished Colour: RAL 7035 Supply includes: Assembly parts for fast, tool-free assembly. Note: The 2nd attachment level should ... Lieske Part No.: 359218 Mfg Part No: 7507715 Type: DK 7507.715

-7% 28,76 EUR 30,78 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7507718 DK Mounting angles, 482.6 mm (48,3 cm ( 19 inch )), 18 U, For FlatBox L-shaped bracket as 2nd attachment level Material: Sheet steel, spray-finished Colour: RAL 7035 Supply includes: Assembly parts for fast, tool-free assembly. Note: The 2nd attachment level should ... Lieske Part No.: 359220 Mfg Part No: 7507718 Type: DK 7507.718

-7% 32,56 EUR 34,83 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7507721 DK Mounting angles, 482.6 mm (48,3 cm ( 19 inch )), 21 U, For FlatBox L-shaped bracket as 2nd attachment level Material: Sheet steel, spray-finished Colour: RAL 7035 Supply includes: Assembly parts for fast, tool-free assembly. Note: The 2nd attachment level should ... Lieske Part No.: 359222 Mfg Part No: 7507721 Type: DK 7507.721

-7% 36,36 EUR 38,91 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7507740 DK Levelling feet, M10x20 mm, For Flatbox, For screw-fastening into the enclosure base. Width across flats 17, mounting thread multi-tooth 30. Applications: Instrument case Floor standing enclosures Function principle: For screw-fastening into ... Lieske Part No.: 647870 Mfg Part No: 7507740 Type: DK 7507.740

-7% 9,37 EUR 10,03 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7688000 DK 482.6 mm (48,3 cm ( 19 inch )) mounting angles, 24 U, For H: 1200 mm For mounting 482.6 mm (48,3 cm ( 19 inch )) components in DK PS network and server enclosures and in CS New Basic outdoor enclosures. The mounting angles are depth-adjustable on a 25 mm pitch pattern. Lieske Part No.: 356557 Mfg Part No: 7688000 Type: DK 7688.000

-7% 67,36 EUR 72,07 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7705035 DK Gland plate with brush strip, WxD: 599x133,5 mm, For EL Folded gland plate with foamed-in seal and plastic brush inserts for simple cable entry. Material: Sheet steel, 1.5 mm Colour: RAL 7035 Packs of: 1 pc(s). EAN: 4028177166073 Customs tariff number: ... Lieske Part No.: 629572 Mfg Part No: 7705035 Type: DK 7705.035

-7% 43,18 EUR 46,20 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Rittal 7826885 Roof plate for cable entry, two-piece for TS, TS IT In exchange for the standard roof. Equipped with a sliding angular bracket in the rear section. Rubber cable clamp strip on both sides for attaching cable bundles and bunched cables. Due to the ... Lieske Part No.: 973638 Mfg Part No: 7826885 Type: TS 7826.885

-7% 114,20 EUR 122,20 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7827480 DK-TS Einbauwinkel, For L-shaped mounting angles into TS, 482.6 mm (48,3 cm ( 19 inch )), For W: 800 mm The installation brackets are screw-fastened to the enclosure frame in the enclosure width. The mounting angle is attached to the depth stay at the top and bottom. For partial enclosure configuration, ... Lieske Part No.: 985805 Mfg Part No: 7827480 Type: DK 7827.480

-7% 56,62 EUR 60,58 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7829200 DK Central earthing point For connecting earth straps, earthing braids to the vertical and horizontal enclosure section. The connection bracket is connected to the enclosure frame with 2 screws and is securely contacted. Earth ... Lieske Part No.: 289726 Mfg Part No: 7829200 Type: DK 7829.200

-6% 8,38 EUR 8,96 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Rittal 7829400 DK Kit, For separated TS 8 frames, Mehr Info??? Every TS frame is easily converted to a rack suitable for dismantling. To this end, the frame sections in the roof and base frame are separated, optionally in the width or depth. The four connection ... Lieske Part No.: 885562 Mfg Part No: 7829400 Type: TS 7829.400

-7% 56,40 EUR 60,35 EUR plus delivery charges Delivery time on requestinfo_outline

Rittal 7856090 DK PSM Plus socket module, CEE 7/3 (type F), 4-way, black, non-switchable, with thermal overcurrent protection The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be ... Lieske Part No.: 103007 Mfg Part No: 7856090 Type: DK 7856.090

-7% 55,84 EUR 59,74 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Rittal 7967000 DK Spacer, L: 50 mm, For TS roof plate To raise the TS roof for ventilation purposes, in three different heights. Material: Hexagon steel section Surface finish: Zinc-plated Supply includes: Assembly parts Note: Not suitable for crane ... Lieske Part No.: 613245 Mfg Part No: 7967000 Type: DK 7967.000

-7% 33,46 EUR 35,80 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Mounting Material from Schroff

Schroff cage nut M6 50St 21100-003 / 05 Captive nut M6 • For attaching faceplates, patch panels or other fixtures on frame, angular profiles or depth struts with rectangular • Use For standard ground on at least one attachment point ... Lieske Part No.: 969575 Mfg Part No: 21100-003/05

14,76 EUR plus delivery charges Delivery time on requestinfo_outline

Schroff 60001068 Rugged pair of telescopic rails Telescopic slides for servers with full extension. max. Load 90 kg Material Galvanized sheet steel, Execution: housing for depths of 72-92cm, with multi-pin adapter for easy and screwless ... Lieske Part No.: 499503 Mfg Part No: 60001068

49,00 EUR plus delivery charges in stockinfo_outline

Mounting Material from Schweitzer

Schweitzer EZM2061 EZM 2061 Universal mounting plate 20 HE L = 889 Universal mounting plate for mounting on the 19Z level or between the side or rear mounting chassis. Shortened or split mounting plates on request. Material: 3.0 mm sheet steel Surface: galvanized ... Lieske Part No.: 308001 Mfg Part No: EZM2061

200,28 EUR plus delivery charges Delivery time on requestinfo_outline

Schweitzer EZM2261 EZM 2261 Universal mounting plate 22 HE L = 977 Suitable for mounting on the 19-inch level or between the side or rear mounting chassis.Shortened or split mounting plates on request.Material: 3.0 mm sheet steel Surface: galvanizedDelivery: with ... Lieske Part No.: 308030 Mfg Part No: EZM2261

222,93 EUR plus delivery charges Delivery time on requestinfo_outline

Schweitzer EZM3161 EZM 3161 Universal mounting plate 31 HE L = 1377 Suitable for mounting on the 19-inch level or between the side or rear mounting chassis.Shortened or split mounting plates on request.Material: 3.0 mm sheet steel Surface: galvanizedDelivery: with ... Lieske Part No.: 308048 Mfg Part No: EZM3161

276,74 EUR plus delivery charges Delivery time on requestinfo_outline

Schweitzer EZM3561 EZM 3561 Universal mounting plate 35 HE L = 1555 Suitable for mounting on the 19-inch level or between the side or rear mounting chassis.Shortened or split mounting plates on request.Material: 3.0 mm sheet steel Surface: galvanizedDelivery: with ... Lieske Part No.: 308064 Mfg Part No: EZM3561

321,61 EUR plus delivery charges Delivery time on requestinfo_outline

Schweitzer EZM4061 EZM 4061 Universal mounting plate 40 HE L = 1778 Universal mounting plate for mounting on the 19Z level or between the side or rear mounting chassis. Shortened or split mounting plates on request. Material: 3.0 mm sheet steel: Surface: galvanized, ... Lieske Part No.: 308067 Mfg Part No: EZM4061

380,99 EUR plus delivery charges Delivery time on requestinfo_outline