Helukabel 24525 HELU TOPFLEX®-EMV-UV-2xSLCH-J 4G6qmm Black

Technical data:

Special motor connection cable for frequency converters in accordance with DIN VDE 0250
Temperature range when moving -5°C to +90°C when fixed -40°C to +90°C
Permissible operating temperature on the conductor +90°C
Nominal voltage U0/U 600/1000 V
Maximum permissible Operating voltage single-phase and three-phase current 700/1200 V DC operation 900/1800 V
Test voltage 4000 V
Insulation resistance min. 200 MOhm x km
Coupling resistance depending on conductor cross-section max. 250 Ohm/km
Minimum bending radius with free movement for external Ø: up to 12 mm: 10x cable Ø > 12-20 mm: 15x cable Ø > 20 mm: 20x cable Ø fixed for external Ø: up to 12 mm: 5x cable Ø > 12-20 mm: 7.5x cable Ø > 20 mm: 10x cable Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Structure:
Bare copper wire, fine-wire according to DIN VDE 0295 Class 5, BS 6360 cl.5, IEC 60228 cl.5
Core insulation made of cross-linked polyethylene (XLPE)
Core marking BR, SW, GR
Cores twisted concentrically in layers
1. Shielding with special aluminum foil 2. Shielding braid made of tinned copper wires, coverage approx. 85%
Outer jacket based on special polyolefin
Jacket color black (RAL 9005) with meter marking
Properties:
halogen-free
Low operating capacitance
Low coupling resistance results in good electromagnetic compatibility
This shielded motor connection cable with low operating capacitance of the individual cores due to special XLPE core insulation and low shielding capacitance enables lower-loss power transmission compared to PE connection cables
The optimal shielding enables interference-free operation of frequency converters
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
Tests:
self-extinguishing and flame-retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (corresponds to DIN VDE 0472 Part 804 test type B)
Meets EMC requirements according to EN 55011 or DIN VDE 0875 Part 11
Notes:
Current carrying capacity for continuous operation up to 30°C ambient temperature. For different ambient temperatures, the conversion factors and, in addition, the specifications in DIN VDE 0298 Part 4 apply
. Use:
This TOPFLEX®-EMV-UV-2XSLCH-J motor connection cable for frequency converters ensures EMC in systems and buildings, facilities with devices and equipment from which electromagnetic interference fields can have an unacceptable effect on the environment. As a result of the permissible operating temperature on the conductor of +90°C, a higher current carrying capacity is permitted compared to PE-insulated motor connection cables. As a connection and connecting cable with medium mechanical stress with fixed installation and occasional free movement in dry, damp and wet rooms. They are also approved for installation outdoors and underground when installed in pipes. Installation in pipes is permitted if precautions are taken to ensure that no water can collect in the pipe. Used in the automotive industry, food industry, environmental technology, packaging industry, machine tools, handling equipment, for SIMOVERT drives in industry for pumps, fans, conveyor belts and air conditioning systems, etc. Use in Ex areas. EMC = Electromagnetic Compatibility In order to comply with radio interference suppression in accordance with EN 55011, the shield must be contacted on both sides and over a large area.
Standard lengths: 500 m, 1000 m
Subject to technical changes.
Type: 24525