Other Measuring Devices in Measurement
Other Measuring Devices from Gossen
 |
 Gossen Z216C USB X-TRA interface USB, adapter f.METRAHIT XTRA
Infrared-USB interface adapter for METRAHIT AM XTRA, PM, E and S series. The adapter enables data transfer between multimeter and PC. The adapter connects multimeters equipped with a serial IR ...Lieske Part No.: 651087 Mfg Part No: Z216C Type: USB X-TRA |
337,74 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen USB X-TRA set interface adapter USB X-TRA Z216D
Interface adapter USB X-TRA with METRAwin 10 software in a set. The adapter enables data transfer between multimeter and PC. The adapter connects multimeters equipped with a serial IR interface, ... Lieske Part No.: 1326242 Mfg Part No: Z216D Type: USB X-TRA Set |
462,07 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z218G NA X-TRA power adapter, AC110V-230V / DC5V
Power supply adapter 90 ... 250 VAC / 5 VDC for METRAHIT AM XTRA, XTRA, PM XTRA & PRIME, EXTRA, ENERGY, ISO, OUTDOOR. for METRAHIT X-TRA, EXTRA, ULTRA, T-COM, T-COM Plus, ISO, ISO AERO, COIL, ... Lieske Part No.: 651113 Mfg Part No: Z218G Type: NA X-TRA |
177,74 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen NA HIT 2x power adapter AC90V-250V/DC5V Z218H
Power supply adapter 90 ... 250 VAC / 5 VDC for METRAHIT 2x, CAT IV. The power adapter enables battery-saving mains operation, especially for continuous measurements on multimeters with internal ... Lieske Part No.: 1322933 Mfg Part No: Z218H Type: NA HIT 2x |
176,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z219B WZ12B Current Probe, 10mA 100Aac
Current clamp sensor 10mA ... 100AAC, 100mV/A, ±2%. Low transmission errorsSuitable for power measuring devices due to small phase angle errorCompact and handyPermanently connected safety ... Lieske Part No.: 660787 Mfg Part No: Z219B Type: WZ12B |
268,39 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z219C current clamp WZ12C,
Clamp current sensor 1 mA ..15 A / 1...150 A ac, switchable. Low transmission errors. Suitable for power measuring devices due to small phase angle error. Compact and handy. Permanently connected ... Lieske Part No.: 529310 Mfg Part No: Z219C Type: WZ12C |
309,86 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z219D WZ12D Current Probe, 30mA-150Aac
Clamp current transformer 30mA ... 150AAC, 1000:1, 1mA/A, ±2.5%. Low transmission errorsSuitable for power measuring devices due to small phase angle errorCompact and handyPermanently connected ... Lieske Part No.: 660785 Mfg Part No: Z219D Type: WZ12D |
279,79 EUR 280,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z225A Z3512A current sensor 1-1000 A, switchable measuring ranges
Clamp current sensor 1/10/100/1000 A AC, switchable. Alternating currents from a few mA up to 1000 A Fault current measurements on three-wire cables High-current measurements on conductors and rails ... Lieske Part No.: 660774 Mfg Part No: Z225A Type: Z3512A |
818,08 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen KC4 KC4 Kelvin Clip Set Z227A
Kelvin pliers - up to 30 mm opening. KC4: Kelvin clips (1 set = 2 pieces) for 4-pole connection of low-resistance test objects, cable length 120 cm, pliers for connections to test objects up to 30 mm ... Lieske Part No.: 664881 Mfg Part No: Z227A Type: KC4 |
265,91 EUR 266,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z227B KC27 Kelvin probes
Kelvin probe. KC27: Kelvin probes (1 set = 2 pieces) with 2 stainless steel tips for 4-pole connection of low-resistance test objects, cable length 120 cm. The Kelvin probes connect low-resistance ... Lieske Part No.: 660901 Mfg Part No: Z227B Type: KC27 |
532,86 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z229A KS29 cable set, f.Leistungsmessgerät
Cable set with 3 test probes 600 V CAT IV. Measuring category CAT II 1000 V / measuring category CAT IV 600 V with 90° angled safety plugs4mm test probes and 3 safety caps for CAT IV1000 V CAT II, ... Lieske Part No.: 664876 Mfg Part No: Z229A Type: KS29 |
106,02 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z270M COIL Adapter XTRA
COIL Adapter XTRA zur Windungsschlussprüfung. Adapter zur Windungsschlusserkennung an Induktivitäten von 10 microH bis 5 H. Der COIL Adapter XTRA ermöglicht in Verbindung mit den folgenden ... Lieske Part No.: 831438 Mfg Part No: Z270M Type: Coil Adapter XTRA |
451,08 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z360N PROFITEST PV SUNSOR sensor, temperature u.Neig. f.Einstrahlung
Sensor for irradiation, temperature and inclination for PROFITEST PVsun. Sensor for measuring irradiation, temperature and inclination angle on photovoltaic systems in accordance with VDE 0126-23/ EN ... Lieske Part No.: 641907 Mfg Part No: Z360N |
579,42 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z461A METRAFLEX 6001XBL/24 current sensor
Flexible current sensor 60/600/6000 AAC, loop length 61... 122 cm. The METRAFLEX are AC current sensors based on the Rogowski principle. They can be used to measure alternating current up to 3000 A or ... Lieske Part No.: 1021560 Mfg Part No: Z461A |
1.148,40 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Gossen Z500V Vario-Stecker-Set
VARIO-STECKER-Set. Drei selbsthaltende Prüfspitzen mit Berührungsschutz zum Anschluss von Messleitungen mit 4 mm-Bananensteckern bzw. mit berührungsgeschützten Steckern an Buchsen mit Öffnungen ... Lieske Part No.: 843683 Mfg Part No: Z500V Type: Vario-Stecker-Set |
170,98 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z501J IrDa-USB Converter interface, adapter m.Programm CD
Interface adapter for connecting test device to PC (IrDA-USB). Galvanically isolated infrared interface for data transfer between test device and PC (USB). Data communication from and to the IrDa ... Lieske Part No.: 648093 Mfg Part No: Z501J Type: IrDa-USB Converter |
301,72 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z501L RS232-USB Converter, interface adapter cable RS232 / USB Z5
Interface converter. The interface converter is used to connect any device with an RS232 interface to computers that only have a USB interface. The Driver Control software is required to use the ... Lieske Part No.: 648146 Mfg Part No: Z501L Type: RS232-USB Converter |
198,94 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z501O PRO-A3 Measuring Adapter II m.PROFiTEST, MASTER CAT III 600V
Measuring adapter for PROFITEST (with spiral cable) - for systems, three-phase current, rotating field. The adapter is included in the scope of delivery of the PROFITEST MASTER series / 2 / 0100SII+. Lieske Part No.: 646970 Mfg Part No: Z501O Type: PRO-A3 II |
203,58 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Gossen Z501P PRO-RLO II 10 m extension,
Plug insert for PROFiTEST - for PE measurements and similar. with 10m cable - CAT IV @ 300V Thanks to four-wire technology, no offset measurement required. 1x plug insert with 10m cable length Lieske Part No.: 885706 Mfg Part No: Z501P Type: PRO-RLO II |
281,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z501R PRO-UNI II measuring adapter m.3, connecting cables
Plug inserts for PROFiTEST with 3 connection cables for any connection standard. CAT IV @ 300V. Lieske Part No.: 646969 Mfg Part No: Z501R Type: PRO-UNI II |
203,23 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z501S PRO-RE Measuring Adapter z.Anschluss, all probes 3- u.4 pole
Adapter for connecting 4 cables for earthing measurements. The adapter is plugged into the test plug - this allows the earth electrode, auxiliary earth electrode, probe and auxiliary probe to be ... Lieske Part No.: 646968 Mfg Part No: Z501S Type: PRO-RE |
213,98 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z501V PRO-HB test tip holder
PRO-HB test probe holder. Holder for test probes and measuring adapters for PROFiTEST MASTER devices. The PRO-HB test probe holder is the ideal accessory for PROFiTEST MASTER devices. The PRO-HB test ... Lieske Part No.: 1918450 Mfg Part No: Z501V Type: PRO-HB |
249,48 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen METRAFLEX P300 Flexible AC Current Sensor 3/30/300 3V Z502E
Flexible current sensor 3/30/300 A, 1V-10mV/A, loop length 450 mm. The flexible current sensor is used in conjunction with measuring devices up to 3 V AC measuring input. The sensor loop can be placed ... Lieske Part No.: 438944 Mfg Part No: Z502E Type: METRAFLEX P300 |
689,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Gossen Z502F Barcode Professional scanner RS232, m.Spiralkabel 1m
Barcode reader/scanner with laser for test devices with RS232 interface. The barcode scanner with spiral cable was specially configured for the PROFITEST MASTER test device series, for example for ... Lieske Part No.: 645559 Mfg Part No: Z502F Type: Barcode-Profiscanner |
898,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|