Other Measuring Devices in Measurement

Other Measuring Devices from Theo Benning

Theo Benning 044113 Benning grounding set for IT120B/IT130 with 2 ground spikes, 3 test leads Earthing set. For earthing measurements using the three-wire measuring method. Consists of 2 earth spikes and 3 test leads (2 x length = 20 m, 1 x length = 4.5 m). Lieske Part No.: 1053157 Mfg Part No: 044113

192,36 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Theo Benning 044121 Benning temperature sensor K-type insertion sensor V4A tube -196 °C-+800°C Temperature sensor. Temperature sensor design for gases/liquids. With supply line, yes. K-type insertion sensor (V4A tube) for soft-plastic media, liquids, gases and air. Temperature measuring range: ... Lieske Part No.: 298140 Mfg Part No: 044121

70,08 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044122 Benning measuring adapter passive 16A CEE 5-pin protective contact plug Measuring adapter 16 A CEE 5-pin. For three-phase consumers, passive, without mains voltage-dependent switching devices. For measuring RPE, RISO and IEA. 16 A CEE coupling, 5-pin to 16 A safety plug. Lieske Part No.: 1051202 Mfg Part No: 044122

89,98 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044123 Benning measuring adapter passive 32A CEE 5-pin protective contact plug Measuring adapter 32 A CEE 5-pin. For three-phase consumers, passive, without mains voltage-dependent switching devices. For measuring RPE, RISO and IEA. 32 A CEE coupling, 5-pin to 32 A safety plug. Lieske Part No.: 1051203 Mfg Part No: 044123

112,60 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044124 Benning TA 1 alligator clips 2 pieces red, black alligator clips Benning TA 1 crocodile clips. Plug-in technology 4 mm safety plug technology. Alligator clip yes. 2-part, red/black. Professional design. Measuring circuit category Cat III. Max. voltage measuring ... Lieske Part No.: 1051204 Mfg Part No: 044124 Type: TA 1

17,68 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044125 Benning TA2 safety measuring cable set 6 pieces 4mm Benning TA 2 safety measuring lead set. Plug-in technology 4 mm safety plug-in technology. 6-piece, red/black. Professional design. Consists of: Measuring leads yes, current load 19 A, insulation ... Lieske Part No.: 1051205 Mfg Part No: 044125 Type: TA 2

51,54 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044126 Benning TA 3 measuring cable set 8 pieces red sw with cable test tip claw gripper Benning TA 3 safety measuring lead set. Plug-in technology 4 mm safety plug-in technology. 8-piece, red/black. Professional design. Consists of: Measuring leads yes, current carrying capacity 19 A, ... Lieske Part No.: 1051206 Mfg Part No: 044126 Type: TA 3

76,08 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Theo Benning 044127 Benning measuring adapter active 16A CEE 5-pin for leakage current clamp CM9 Measuring adapter 16 A CEE 5-pin. For three-phase consumers. For measuring differential, protective conductor and load current. Conductors led out individually and double insulated. 16 A CEE coupling ... Lieske Part No.: 1053154 Mfg Part No: 044127

154,50 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044128 Benning measuring adapter active 32A CEE 5-pin for leakage current clamp CM9 Measuring adapter 32 A CEE 5-pin. For three-phase consumers. For measuring differential, protective conductor and load current. Conductors led out individually and double insulated. 32 A CEE coupling ... Lieske Part No.: 1053155 Mfg Part No: 044128

177,37 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044131 Benning measuring adapter active 16A plug/coupling for leakage current clamp CM9 Measuring adapter 16 A protective contact. For single-phase consumers. For measuring differential, protective conductor and load current. Conductors individually led out and double insulated. 16 A ... Lieske Part No.: 1053716 Mfg Part No: 044131

114,95 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044133 Benning DB 2 demonstration case for practical application Benning DB 2. Demonstration case for the practical application and training of VDE 0100 installation test devices. Portable demonstration case for simulating safety tests on electrical systems in ... Lieske Part No.: 302201 Mfg Part No: 044133 Type: DB 2

994,56 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044140 Benning measuring adapter active 16A CEE 5-pin only for ST720 Benning MA 1-16 measuring adapter 16 A CEE 5-pin. For three-phase consumers, active, with mains voltage-dependent switching devices. For measuring RPE and IPE, direct measurement under functional ... Lieske Part No.: 1054250 Mfg Part No: 044140

515,88 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044141 Benning Aktiv-Messadapter 32A CEE 5polig 3ph. RPE IPE f.ST725 Benning MA 1-32 Messadapter 32 A CEE 5-polig. Für dreiphasige Verbraucher, aktiv, mit netzspannungsabhängige Schalteinrichtungen. Zur Messung von RPE und IPE, direkte Messung unter ... Lieske Part No.: 507050 Mfg Part No: 044141

538,20 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044142 Benning safety plug 4mm for devices without safety plug Measuring adapter. Safety plug with 4 mm plug for devices without safety plug. Plug technology: 4 mm safety plug technology. Material of the insulation material: other. Measuring circuit category: Cat ... Lieske Part No.: 302834 Mfg Part No: 044142

82,07 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044146 Benning safety measuring cables 2 pieces with 2mm measuring tip Safety measuring leads with 2 mm measuring tip diameter. Plug-in technology 4 mm safety plug technology. 2-part, red/black. Consisting of: Measuring leads yes. Current load 10 A, insulation material ... Lieske Part No.: 1054251 Mfg Part No: 044146

18,96 EUR plus delivery charges Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Theo Benning 044147 Benning measuring adapter passive 16A CEE 3-pin CEE protective contact plug 3-way CEE measuring adapter. For three-phase and single-phase consumers, passive, without mains voltage-dependent switching devices. For measuring RPE, RISO and IEA. 3-way CEE coupling: 16 A CEE ... Lieske Part No.: 1055641 Mfg Part No: 044147

203,57 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044148 Benning measuring adapter 16A CEE 5-pin to 16A CEE sockets for IT130 Measuring adapter 16 A CEE 5-pin. For measuring voltage and phase sequence/rotating field on 16 A CEE sockets. 16 A CEE coupling 5-pin. Plug-in technology other. Material of the insulation material ... Lieske Part No.: 1057079 Mfg Part No: 044148

88,01 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044149 Benning Commander test plug TEST/MEM button good/bad LED green/red Commander test plug. For earthed socket with TEST/SAVE button and LED measuring point illumination, good/bad display via green/red LED, PE contact electrode for protective conductor connection. Lieske Part No.: 1057080 Mfg Part No: 044149

335,52 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044151 Benning thermal paper 20 pieces for ST 750A Thermal paper roll. Thermal paper roll with 35 mm roll diameter, length 13 m, paper width 58 mm. 1 PU corresponds to 20 pieces. Thermal transfer paper version. Lieske Part No.: 1053742 Mfg Part No: 044151

107,04 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044154 Benning industrial keyboard with USB interface for ST 750A Industrial keyboard. High-quality function keyboard with notebook keypad and integrated trackball. Alternative to the existing touchscreen input field of the device tester. Convenient input of all ... Lieske Part No.: 1053741 Mfg Part No: 044154

164,88 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044155 Benning Commander test probe TEST MEM good/bad LED green red for IT130 Commander test probe. Switchable, with TEST and SAVE button and bright LED measuring point illumination, good/bad display via green/red LED, PE contact electrode for protective conductor connection. Lieske Part No.: 322596 Mfg Part No: 044155

311,84 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044156 Benning RFID tag 100x self-adhesive 125kHz UID 10 digits D18mm T2.5mm RFID tag, self-adhesive. Frequency 0.125 MHz. The test object is identified using radio frequency (Radio Frequency IDenditfiCation) without visual contact or direct contact with the RFID tag. Each ... Lieske Part No.: 322590 Mfg Part No: 044156 Type: RFID-Tag selbstklebend

260,54 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044158 Benning RFID tag 100x tags 125kHz UID 10 digits 43x34x5.5mm PC RFID tag pendant. Frequency 0.125 MHz. The test object is identified using radio frequency (Radio Frequency IDenditfiCation) without visual contact or direct contact with the RFID tag. Each RFID tag ... Lieske Part No.: 322593 Mfg Part No: 044158 Type: RFID-Tag Anhänger

333,12 EUR plus delivery charges Delivery time on requestinfo_outline

Theo Benning 044159 Benning MA 3 measuring adapter 16A+32A CEE 5p/3p 1/3ph. for ST725/750A/755/760 Benning MA 3 measuring adapter 16 A + 32 A CEE 5-pin, 16 A CEE 3-pin. For testing CEE extension cables and passive testing of 1-phase/3-phase consumers (electrical devices). In conjunction with the ... Lieske Part No.: 330180 Mfg Part No: 044159 Type: MA 3

819,96 EUR plus delivery charges Delivery time on requestinfo_outline