Underfloor ducts and accessories in Wiring systems
Underfloor ducts and accessories from HAGER
 |
 Hager AKM200050GBZ cover punched GBZ round 50mm 400mm from AK 200x70mm
Cover punched GBZ round 50mm length 400mm made of sheet steel to AK 200x70mm. Cover with mounting opening for floor installation ducts according to DIN EN 50085-1 and DIN EN 50085-2-2, including ...Lieske Part No.: 1565495 Mfg Part No: AKM200050GBZ |
68,11 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKM250200Q06 cover punched Q06 200x200mm 400mm from AK 250x70mm
Cover punched Q06 200x200mm length 400mm made of sheet steel to AK 250x70mm. Cover with mounting opening for floor installation ducts according to DIN EN 50085-1 and DIN EN 50085-2-2, including ... Lieske Part No.: 1565494 Mfg Part No: AKM250200Q06 |
65,34 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKM300244Q12 cover punched Q12 244x244mm 400mm from AK 300x70mm
Cover punched Q12 244x244mm length 400mm made of sheet steel to AK 300x70mm. Cover with mounting opening for floor installation ducts according to DIN EN 50085-1 and DIN EN 50085-2-2, including ... Lieske Part No.: 1565463 Mfg Part No: AKM300244Q12 |
71,87 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER AKU1500401 floor trunking-UT 2,4m, 1 Sided f.AK 150x40mm
On-floor duct lower section, 1-sided, with side profiles made of sheet steel to AK 150x40mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 950451 Mfg Part No: AKU1500401 |
204,10 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER AKU1500402 Floor trunking lower part , bilaterally 150x40
On-floor duct lower section, 2-sided, with side profiles made of sheet steel to AK 150x40mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 642377 Mfg Part No: AKU1500402 |
201,72 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER AKU2000401 floor trunking-UT 2,4m, 1 Sided f.AK 200x40mm
On-floor duct lower section, 1-sided, with side profiles made of sheet steel to AK 200x40mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 289270 Mfg Part No: AKU2000401 |
214,79 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER AKU2000402 floor trunking base, two-sided 200x40
On-floor duct lower part, 2-sided, with side profiles made of sheet steel to AK 200x40mm. On-floor installation duct lower part in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with slide-on ... Lieske Part No.: 642375 Mfg Part No: AKU2000402 |
214,79 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKU2000702 floor duct lower part, 2-sided with side profile AK 200x70mm 2.4m
On-floor duct lower section, 2-sided, with side profiles made of sheet steel to AK 200x70mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 1329874 Mfg Part No: AKU2000702 |
228,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKU2500401 floor duct base, 1-sided with steel side profiles 2.4m
On-floor duct lower section, 1-sided, with side profiles made of sheet steel to AK 250x40mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 1990858 Mfg Part No: AKU2500401 |
228,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKU2500402 floor trunking base, two-sided 250x40
On-floor duct lower section, 2-sided, with side profiles made of sheet steel to AK 250x40mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 325253 Mfg Part No: AKU2500402 |
228,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKU3000701 on-floor duct UT 2.4m 1-sided for AK 300x70mm
On-floor duct lower section, 1-sided, with side profiles made of sheet steel to AK 300x70mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 1329873 Mfg Part No: AKU3000701 |
255,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKU3000702 floor duct lower part 2-piece with side profiles AK 300x70mm 2.4m
On-floor duct lower section, 2-sided, with side profiles made of sheet steel to AK 300x70mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with ... Lieske Part No.: 1329856 Mfg Part No: AKU3000702 |
255,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKU4000701 floor duct lower part 1s. with side profiles steel AK 400x70 2.4m
On-floor duct lower section, 1-sided, with sheet steel side profiles, AK 400x70mm. On-floor installation duct lower section in accordance with DIN EN 50085-1 and DIN EN 50085-2-2 with slide-on ... Lieske Part No.: 2078706 Mfg Part No: AKU4000701 |
282,27 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKZKV090 duct connector angled 90° steel
Duct connector as a 90° angle made of steel for above-floor duct AK. Duct connector 90° angled for above-floor installation ducts according to DIN EN 50085-1 and DIN EN 50085-2-2, including ... Lieske Part No.: 1329857 Mfg Part No: AKZKV090 |
7,52 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager AKZKV180 duct connector straight, 180 ° steel
Straight duct connector made of steel for above-floor duct AK. Straight duct connector for above-floor installation ducts according to DIN EN 50085-1 and DIN EN 50085-2-2, including fastening screws. Lieske Part No.: 860158 Mfg Part No: AKZKV180 |
6,73 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER AKZSA0135 protective conductor, z.Erdanschluss
Earthing cable for above-floor duct AK, length 135 mm, green-yellow. Protective conductor for earthing the duct system, screw connection on the straight duct connector, flexible cable 2.5 mm², 135 mm ... Lieske Part No.: 289981 Mfg Part No: AKZSA0135 |
5,35 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BDQ08057011 blind cover Q08 f.5mm, lining thickness eisengrau
Ultra-flat blind cover Q08 294x294mm for 5mm floor covering made of iron grey polyamide. Supply unit / blind cover for ultra-flat installation depths in accordance with DIN EN 50085-1 and DIN EN ... Lieske Part No.: 894334 Mfg Part No: BDQ08057011 |
93,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BDQ08059005 blind cover Q08 f.5mm, lining thickness black
Ultra-flat blind cover Q08 294x294mm for 5mm floor covering, deep black polyamide. Supply unit / blind cover for ultra-flat installation depths in accordance with DIN EN 50085-1 and DIN EN 50085-2-2, ... Lieske Part No.: 894332 Mfg Part No: BDQ08059005 |
93,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKA400800 cover for BKF/BKW400 L=800mm
Blind cover for screed-flush floor ducts made of sheet steel for BKF/BKW 400x800mm. Cover for screed-flush installation duct according to DIN EN 50085-1 and DIN EN 50085-2-2, including fastening ... Lieske Part No.: 1329869 Mfg Part No: BKA400800 |
127,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKA400800Q12 cover punched Q12 244x244mm from BKF/BKW 400x800mm
Cover punched Q12 244x244mm made of sheet steel for BKF/BKW 400x800mm. Cover for screed-flush installation duct according to DIN EN 50085-1 and DIN EN 50085-2-2, including fastening screws, drill ... Lieske Part No.: 1768772 Mfg Part No: BKA400800Q12 |
152,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKA400800R12 cover f.BKF/BKW400 L = 800mm punching R12
Cover punched R12 round 306mm made of sheet steel for BKF/BKW 400x800mm. Cover for screed-flush installation duct according to DIN EN 50085-1 and DIN EN 50085-2-2, including fastening screws, drill ... Lieske Part No.: 863743 Mfg Part No: BKA400800R12 |
152,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKB3002 upper part brush strip for BKB300 L=1m
Upper part for floor duct with brush strip BKB 300x80 with a length of 1 m. Upper part with coverable brush strip for floor duct for dry rooms indoors with dry-cleaned floors. The upper part consists ... Lieske Part No.: 1103194 Mfg Part No: BKB3002 |
299,77 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKB3002W3 OT tub brush strip for BKB300 L=1m
Upper part of the tray for the BKB300 floor duct brush strip, 1 m long. Upper part of the tray with a coverable brush strip for the floor duct for dry rooms indoors with dry-cleaned floors. The upper ... Lieske Part No.: 681586 Mfg Part No: BKB3002W3 |
195,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKB300532 flat angle OT outside corner for BKB 300x80
Flat angle top part, outside corner for floor duct with brush strip BKB 300x80. Flat angle top part, outside corner with coverable brush strips for floor duct for dry rooms indoors with dry-maintained ... Lieske Part No.: 1103195 Mfg Part No: BKB300532 |
168,00 EUR
plus delivery charges
Delivery time on requestinfo_outline
|