Labeling, marking in Isolation / Identification

Labels for hand-writing, self-adhesive, writable labels made of yellow fabric for marking electrical systems, equipment labeling, warehouse and item labeling. Easy to write on with pencil, ballpoint pen and typewriter. Self-adhesive PVC-impregnated fabric in yellow with black border, 0.15 mm thick. Temperature resistant from -30°C to +80°C, good adhesive strength, ageing-resistant. Design: Pieces per card: 40, dimensions: 11x19 mm. PU: 1.
Lieske Part No.: 479960

Test stickers Test stickers are used as part of quality assurance (QA) DIN ISO 9000 ff and, for example, for legally required inspections and accident prevention (UVV). This applies in particular to the monitoring of test equipment, devices and systems as well as important supply lines (cables, pipes). You have two options for attaching the test stickers: directly on the device being tested or on one of the basic stickers offered, which is stuck onto the device. The test date is marked with a pen or notching pliers. The test stickers are made of forgery-proof document film, i.e. to protect against misuse, the sticker is irreversibly destroyed if anyone tries to remove it. Properties of the document film: The document film can be written on with a pencil, ballpoint pen, fiber pen or typewriter. It is 0.05 mm thick and is temperature-resistant from 30 degrees C to +80 degrees C. The adhesive strength is higher than the tear resistance of the film. It breaks when removed and is largely resistant to aging, weathering and light. It is also resistant to water, sea water, alcohol, aliphatic solvents and petroleum-based oils and fats. Flash red
Lieske Part No.: 906320

Inspection stickers 18 yellow
Lieske Part No.: 1021332

Basic labels - The self-adhesive basic label is made of white, writable plastic film that can be stuck on multiple times. It adheres well to clean surfaces and is destroyed when removed. The document film is resistant to water, aliphatic solvents and petroleum-based oils and fats. Design: Pieces per booklet: 25, dimensions: 92x40 mm, pack size: 1.
Lieske Part No.: 131374

Sales unit: 1 PC.
Lieske Part No.: 1101509

Warning and information sign: Do not switch on, work is in progress
300x120mm
magnetic film Sales unit: 1 ST.
Lieske Part No.: 1186743

'Rechargeable lithium-ion battery
LabelManagerT 360D, 420Phlt'
Lieske Part No.: 1893639

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1262124

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642483

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642485

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642487

RHINO 4200 in case Rhino bands: 6, 9, 12, 19 mm nV
Lieske Part No.: 1344765

High-speed label printer with WI-FI® connectivity. Save time and print up to 71 labels per minute*
. Thermal printing technology - requires no ink or toner
. Built-in Wi-Fi® for wireless printing
. A single LabelWriterT Wireless on a network provides
label printing for everyone
. Use free DYMO® Label software to
quickly design and print labels from a Mac® or PC, or use
Microsoft® Office plugins to
print directly from Word, Excel® or Outlook®
. For even more features, download the free
DYMO® Connect app for smartphone, tablet and desktop
Lieske Part No.: 1948345

DYMO LabelWriter 550, label printer for up to 62 labels/minute, USB, 300 dpi. Direct thermal, for labels up to 60mm wide
Lieske Part No.: 2061719

Rhino embossed labels: 12mm wide stainless steel and aluminum labels - adhesive or non-adhesive - that are resistant to corrosion due to extreme weather and temperature conditions, chemicals and UV radiation.
Sales unit: 10 pieces
Lieske Part No.: 1262218

D1 label ribbon, 12mmx7m, blue on
white
Lieske Part No.: 778338

D1 label ribbon, 24mm x 7m, black on transparent.
Lieske Part No.: 264244

D1 label ribbon, 24mmx7m, black on
red
Lieske Part No.: 364844

Rhino 5200 in a sturdy hard case with quick access keys and graphic display with backlight for Rhino labels in 6 9 12 and 19mm including 19mm flex. white nylon tape, 12mm white vinyl tape and power supply and rechargeable lithium-ion battery
Lieske Part No.: 481436

LabelManager 420P ABC Keyboard (WE) Use it standalone - or connect it to your PC or Mac via USB and use DYMO Label software to print barcodes, logos, large quantities of labels from data files and much more. Large 4-line backlit display that lets you view text effects before printing 8 fonts 7 font sizes 10 text styles 8 frames and underlines With lithium-ion battery and power adapter for charging Uses DYMO D1 labels with a width of 6, 9, 12 and 19mm.
Lieske Part No.: 952171

Warning tape should be placed over buried cables and pipes, non-flame, Ld-PE labeled Caution Power Cable, type: FTWB item:
ST.
Lieske Part No.: 823018

QR code for use with the My HPlus service app. Contents 10 pieces
Lieske Part No.: 1920397

QR code for use with the My HPlus service app. Contents 100 pieces
Lieske Part No.: 1920396

My HPlus Service-IA KIT for acceptance and commissioning consisting of two information signs and one acceptance sign
Lieske Part No.: 1920395

Thermotransferfarbbänder für hochwertige und dauerhafte Druckergebnisse auf Etiketten. Für die empfohlenen Bedruckungsmaterialien stehen optimierte Farbbänder zur Verfügung. Die Thermotransfertechnologie basiert auf dem Erhitzen von bestimmten Punkten im Thermotransferdruckkopf. Der Transfer erfolgt dabei sehr präzise vom Farbband auf die Oberfläche vom bedruckten Material. Unterschiedliche Anteile an Wachs, Kunstharz, Farbpigmenten und Additiven verleihen dem Thermotransferband ihre Eigenschaften wie Übertragbarkeit (Schmelzpunkt und Viskosität), Bedruckbarkeit und Haftung auf unterschiedlichen Materialien, Beständigkeit des Ausdrucks gegen mechanische und chemische Einflüsse, gegen Hitze und UV-Strahlung und optische Dichte. Verkaufseinheit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 511996

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837258

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837259

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837260

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837261

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057577

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057578

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057579

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057580

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057581

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057582

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057583

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057584

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057585

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057586

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057587

Schnelle und einfache Verwendung vorbedruckter Kabelmarkierer. Aufklickbar. Ideal zur nachträglichen Montage oder für Wartungs- und Reparaturarbeiten. Perfekte Ausrichtung der Zeichenkombinationen durch Einrasten der angrenzenden Markierer. Auch bei Vibrationen fester Sitz durch hohe Materialspannung. WIC Tool für alle vier Größen einsetzbar. Bestückung des Werkzeugs mit bis zu 20 Markierern. Erhältlich in der Farbe Gelb und in den Farben des internationalen Widerstandsfarbcodes. Weitere Farben auf Anfrage. 2-stellige Markierungen wie L1, L2, L3 und PE verfügbar. Farbe des Trägers der Markierer gibt Auskunft über den Typ: WIC0 (grün), WIC1 (rot), WIC2 (blau), WIC3 (gelb). Zubehörteile zur Kennzeichnung von Kabeln von 6 mm² bis 25 mm² (WICA-AC10-25) und bis zu 95 mm² (WICA-ACT-BK) erhältlich. WIC-Markierer werden durch simples Aufdrücken mit dem ergonomisch entwickelten WIC Tool oder - sofern kein Werkzeug verfügbar ist - einfach per Hand auf das Kabel appliziert. Einfach die Markierer in das Werkzeug einführen, den ersten Markierer auf das Kabel drücken, drehen und den nächsten Markierer aufbringen. Sobald alle Markierer auf dem Kabel appliziert sind, werden diese zusammengeschoben, bis die Verriegelung einrastet. Für die Kennzeichnung von Glasfaserkabeln ist die manuelle Applikation empfohlen.Größere Kabeldurchmesser (6 mm² bis 95 mm²) können mithilfe der WIC-Zubehörteile WICA gekennzeichnet werden. Passend hierauf sind die Größen WIC0, WIC1 und WIC2 abgestimmt. Verkaufseinheit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 687531

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 667374

Kabellaminieretiketten mit weißem Beschriftungsfeld. Äußerst temperatur- und chemikalienbeständig. UV- und witterungsbeständig - fünf Jahre bei mitteleuropäischem Normalklima. Hervorragender Schutz gegenüber Feuchtigkeit und mechanischem Abrieb durch das Schutzlaminat. Für besondere Anforderungen an chemische Beständigkeit sowie für Anwendungen im Außeneinsatz wurde dieses Kabellaminieretikett entwickelt. Es besteht aus einem bedruckbaren Bereich und einem Schutzlaminat, der die Bedruckung vor Staub, Schmutz und mechanischer Abnutzung schützt. Das Etikett wird insbesondere zur Kennzeichnung von Kabeln und Leitungen in der Industrie sowie Militärtechnik verwendet. Verkaufseinheit: 15000 ST.
Sales unit: 15000 pieces
Lieske Part No.: 838284

Kostengünstige Alternative zu gravierten Kunststoffschildern, kein zusätzlicher Schildträger nötig. Optimaler Halt auch auf unebenen Oberflächen. Abgerundete Ecken garantieren bessere Endhaftung. Drucken von kontrastreichen Texten und Barcodes. Bedrucken vor Ort, keine externe Beschaffung erforderlich. Spezielle Größen und Farben auf Anfrage erhältlich. TT122OUT für besondere Anforderungen an die chemische Beständigkeit der Bedruckung. Panel-Etiketten bestehen aus einem dickeren Material, welches sich durch einen speziellen Schaumstoffträger auszeichnet. Hierdurch bieten sie eine optimale Alternative zu den traditionell verwendeten gravierten Kunststoffschildern. Die silbernen Etiketten sind besonders für die dauerhafte Kennzeichnung von industriellen Schaltanlagen, Datenschränken und zur generellen Gerätekennzeichnung geeignet.Erstellen Sie detailgetreue, professionelle Etiketten mit unseren Drucksystemen sowie Farbbändern.Zur problemlosen Gestaltung der Etiketten empfehlen wir die Etikettensoftware TagPrint Pro. Verkaufseinheit: 1 ST.
Lieske Part No.: 511992

Kostengünstige Alternative zu gravierten Kunststoffschildern, kein zusätzlicher Schildträger nötig. Optimaler Halt auch auf unebenen Oberflächen. Abgerundete Ecken garantieren bessere Endhaftung. Drucken von kontrastreichen Texten und Barcodes. Bedrucken vor Ort, keine externe Beschaffung erforderlich. Spezielle Größen und Farben auf Anfrage erhältlich. TT122OUT für besondere Anforderungen an die chemische Beständigkeit der Bedruckung. Panel-Etiketten bestehen aus einem dickeren Material, welches sich durch einen speziellen Schaumstoffträger auszeichnet. Hierdurch bieten sie eine optimale Alternative zu den traditionell verwendeten gravierten Kunststoffschildern. Die silbernen Etiketten sind besonders für die dauerhafte Kennzeichnung von industriellen Schaltanlagen, Datenschränken und zur generellen Gerätekennzeichnung geeignet.Erstellen Sie detailgetreue, professionelle Etiketten mit unseren Drucksystemen sowie Farbbändern.Zur problemlosen Gestaltung der Etiketten empfehlen wir die Etikettensoftware TagPrint Pro. Verkaufseinheit: 1 ST.
Lieske Part No.: 512791

Hochwertige Kabellaminieretiketten. Geeignet für die Kennzeichnung von Kabeln und Leitungen. Hervorragender Schutz gegenüber Feuchtigkeit und mechanischem Abrieb durch das Schutzlaminat. Abgerundete Kanten bieten zusätzliche Haltekräfte. Weitere Farben auf Anfrage erhältlich. Thermotransfer Etiketten von HellermannTyton garantieren eine gute Lesbarkeit der Etiketten und bieten zudem hohe Beständigkeiten und Abriebfestigkeiten. Unsere Materialien und Farbbänder wurden optimal an die Bedürfnisse und Anforderungen der Industrien und Kunden angepasst. Zum problemlosen Bedrucken der Etiketten empfehlen wir unsere Druckersysteme, Farbbänder sowie die Software TagPrint Pro. Verkaufseinheit: 2500 ST.
Sales unit: 2500 pieces
Lieske Part No.: 491257

Kombination aus Typenschildetikett und Schutzlaminat, 2-teilig. Lieferung erfolgt auf Rolle. Entwickelt für anspruchsvolle Kennzeichnungslösungen, insbesondere im Automobilbereich. Manipulationssicher, bei Abzugsversuch wird schachbrettartiges Muster hinterlassen. Sehr gut für Anwendungen im Außenbereich geeignet. UV- und witterungsbeständig. Erfüllt die Forderungen des KBA (Kraftfahrtbundesamt). Besonders geeignet als Typenschild für Fahrzeuge. Diese Etiketten werden bevorzugt im Automobilbereich und in der Elektroindustrie zur dauerhaften, manipulationssicheren Anbringung von Typenschildern verwendet. Besonders empfiehlt sich die Etikettenlösung für die Kennzeichnung von ebenen Flächen am Fahrzeugrahmen als Ersatz für konventionelle Aluminiumschilder. Das transparente Überlaminat garantiert eine gute Widerstandsfähigkeit gegen Schmutz und Abrieb und ist einfach und sicher manuell zu applizieren. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 832584

Lieferung auf Karten ermöglicht bedarfsgenaue Entnahme. Zur dauerhaften Kennzeichnung auch bei hohen Temperaturen. Optimaler Schutz vor Verschmutzungen durch glatte Materialoberfläche. Weitere Formate und Druckbilder auf Anfrage erhältlich. Die Etiketten werden unter anderem zur Kennzeichnung von Leitern, elektrischen Betriebsmitteln und Schaltgeräten verwendet. Verkaufseinheit: 1 ST.
Lieske Part No.: 488871

RFID cable ties that can be detected using metal or X-ray machines (result depends on the respective application). Even individual sections can be located using metal pigments throughout the entire band. For safer and cleaner handling of production processes. Strong blue for clear identification during optical inspection. Flexible, contactless data communication. Clear identification of objects through clear numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Robust and resistant in harsh environments and against cleaning processes. Low frequency (LF/125 kHz) - write-protected. High frequency (HF/13.56 MHz) - rewritable. Thanks to the transponder, RFID cable ties offer an innovative solution for clear and fast product identification. Specially developed for applications where the material must be traceable in processes (metal and X-ray machines), these plastic cable ties also contain metal components. This combines the numerous advantages of a detectable cable band with RFID technology. This labeling solution is particularly suitable for securing, serializing, tracking and identifying products in the food and pharmaceutical industries.
Sales unit: 100 pieces
Lieske Part No.: 2048227

RFID cable ties that can be detected using metal or X-ray machines (result depends on the respective application). Even individual sections can be located using metal pigments throughout the entire band. For safer and cleaner handling of production processes. Strong blue for clear identification during optical inspection. Flexible, contactless data communication. Clear identification of objects through clear numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Robust and resistant in harsh environments and against cleaning processes. Low frequency (LF/125 kHz) - write-protected. High frequency (HF/13.56 MHz) - rewritable. Thanks to the transponder, RFID cable ties offer an innovative solution for clear and fast product identification. Specially developed for applications where the material must be traceable in processes (metal and X-ray machines), these plastic cable ties also contain metal components. This combines the numerous advantages of a detectable cable band with RFID technology. This labeling solution is particularly suitable for securing, serializing, tracking and identifying products in the food and pharmaceutical industries.
Sales unit: 100 pieces
Lieske Part No.: 2048226