Screw in Fixing hardware
Screw from Niedax
|
Niedax HM308/30 hex head screw M8 L30 mm blue passivated DIN 50 961
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm ...Lieske Part No.: 740057 Mfg Part No: HM308/30 Type: HM 308/30 |
453,53 EUR
![]() ≈ £379.15 | ≈ $501.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM308/40 HM 308/40 hammer head screw M8, length 40 mm, blue passivated, incl. nut
NIEDAX - Make: HM 308/40T-head bolt M 8 with hexagon nut and washer, for C-series rail model 2913 and model 2914 C-anchor rail with 11 mm slot width and C-anchor rails model 2916 and 2917 with 12 mm ... Lieske Part No.: 230990 Mfg Part No: HM308/40 Type: HM 308/40 |
472,05 EUR
![]() ≈ £394.63 | ≈ $521.62
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM308/50 hammer head screw M8 L50 mm blue passivated DIN 50 961
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm ...Lieske Part No.: 521889 Mfg Part No: HM308/50 Type: HM 308/50 |
515,85 EUR
![]() ≈ £431.25 | ≈ $570.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM310/30 HM 310/30 hammer head screw L 30 mm blue passivated with nut and washer
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm ...Lieske Part No.: 1426288 Mfg Part No: HM310/30 Type: HM 310/30 |
584,25 EUR
![]() ≈ £488.43 | ≈ $645.60
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM310/40 HM 310/40 flat head screw M10, length 40 mm, blue passivated, incl. nut
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm ...Lieske Part No.: 755696 Mfg Part No: HM310/40 Type: HM 310/40 |
671,65 EUR
![]() ≈ £561.50 | ≈ $742.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM310/50 HM 310/50 hammer head screw M10 L50 mm blue passivated incl. nut and washer
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm ...Lieske Part No.: 318852 Mfg Part No: HM310/50 Type: HM 310/50 |
373,35 EUR
![]() ≈ £312.12 | ≈ $412.55
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM408/20 hex head screw M8 with nut and washer L20 mm blue passivated
NIEDAX - Make: HM 408/20T-head bolt M 8 with hexagon nut and washer, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width, galvanized according to DIN ISO 4042, blue ... Lieske Part No.: 150415 Mfg Part No: HM408/20 Type: HM 408/20 |
451,06 EUR
![]() ≈ £377.09 | ≈ $498.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM408/30 HM 408/30 hammer head screw M8 with nut and washer length 30 mm blue
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) ...Lieske Part No.: 332112 Mfg Part No: HM408/30 Type: HM 408/30 |
233,46 EUR
![]() ≈ £195.17 | ≈ $257.97
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM408/40 hammer head screw M8 with nut and washer L40 mm blue pa.
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) ...Lieske Part No.: 398308 Mfg Part No: HM408/40 Type: HM 408/40 |
245,57 EUR
![]() ≈ £205.30 | ≈ $271.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM410/30 hammer head screw M10 with nut and washer L30 mm blue-colored
NIEDAX - Make: HM 4 / 3 hammer head screw M with hexagon nut and washer, anchor channels for C-Model 297, 297 , 2972, 2975 and 298 with 6 mm slot width, galvanized 4 42, blue passivated according ... Lieske Part No.: 880216 Mfg Part No: HM410/30 Type: HM 410/30 |
270,27 EUR
![]() ≈ £225.95 | ≈ $298.65
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM410/40 hammer head screw M10 with nut and washer L40 mm blue passivated
NIEDAX - Make: HM 410/40T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width, galvanized according to DIN ISO 4042, blue ... Lieske Part No.: 244950 Mfg Part No: HM410/40 Type: HM 410/40 |
280,72 EUR
![]() ≈ £234.68 | ≈ $310.20
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HM410/50 hammer head screw M10 with nut and washer L50 mm blue passivated
Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) ...Lieske Part No.: 273479 Mfg Part No: HM410/50 Type: HM 410/50 |
6,38 EUR
![]() ≈ £5.33 | ≈ $7.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HMZM10/30F HMZ M10/30 F hammer head screw M10 toothed 34.5x20 mm L=30 mm steel
Hammerkopfschraube, mit Verzahnung, einschließlich Sechskantmutter und Unterlegscheibe nach DIN EN ISO 7093-1, an jeder Stelle im Profil einsetzbar. Verwendung für : Ankerschienen 2996Z, 2997Z mit ...Lieske Part No.: 702358 Mfg Part No: HMZM10/30F Type: HMZ M10/30 F |
269,80 EUR
![]() ≈ £225.55 | ≈ $298.13
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HMZM12/60F HMZ M12/60 F hammer head screw M12 toothed 34.5x20 mm L=60 mm steel
Hammerkopfschraube, mit Verzahnung, einschließlich Sechskantmutter und Unterlegscheibe nach DIN EN ISO 7093-1, an jeder Stelle im Profil einsetzbar. Verwendung für : Ankerschiene 2996Z mit 22 mm ...Lieske Part No.: 702273 Mfg Part No: HMZM12/60F Type: HMZ M12/60 F |
375,72 EUR
![]() ≈ £314.10 | ≈ $415.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HS10/40 ceiling hook, thread M5, length 40 mm, blue passivated, DIN 50 961
Ceiling hook, with NIEDAX steel dowel with pressed-in cone nut, the cone of the steel dowel is captive with anti-twist protection. The dowel has not been approved by the building authorities and can ...Lieske Part No.: 460375 Mfg Part No: HS10/40 Type: HS 10/40 |
351,50 EUR
![]() ≈ £293.85 | ≈ $388.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax KU6040 screw head plate for U 6040 profile hot-dip galvanized DIN EN ISO 1461
Screw head plate, head plate with welded C-profile with continuous holes on both sides, for mounting on horizontal ceilings, including hot-dip galvanized fastening accessories. Please observe ...Lieske Part No.: 146146 Mfg Part No: KU6040 Type: KU 6040 |
50,45 EUR
![]() ≈ £42.18 | ≈ $55.75
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Niedax NHS10X100/TK-T40V wood screw flat head Ø22.5 mm L 100 mm steel galvanized
Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn.Lieske Part No.: 705776 Mfg Part No: NHS10X100/TK-T40V |
136,71 EUR
![]() ≈ £114.29 | ≈ $151.06
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax NHS10X140/TK-T40V wood screw flat head Ø22.5 mm L 140 mm steel galvanized
Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn.Lieske Part No.: 705777 Mfg Part No: NHS10X140/TK-T40V |
189,86 EUR
![]() ≈ £158.72 | ≈ $209.80
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax NHS6X60/TK-T25V wood screw flat head Ø14 mm L 60 mm steel galvanized
Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn.Lieske Part No.: 705772 Mfg Part No: NHS6X60/TK-T25V Type: NHS 6X60/TK-T30V |
68,31 EUR
![]() ≈ £57.11 | ≈ $75.48
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax NSA6X35/FKK-T30V NSA 6X35/FKK-T30 V screw anchor flat head drill Ø 5 mm L 35 mm steel galvanized
Schraubanker mit Flachrundkopf und Torxantrieb T30. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR 2/2015) ...Lieske Part No.: 691746 Mfg Part No: NSA6X35/FKK-T30V Type: NSA 6X35/FKK-T30 V |
82,93 EUR
![]() ≈ £69.33 | ≈ $91.64
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Niedax NSA6X50/FKK-T30V NSA 6X50/FKK-T30 V screw anchor flat head drill Ø 5 mm L 50 mm steel galvanized
Screw anchor with flat round head and Torx drive T30. For use in functional maintenance or for suspended ceilings with fire protection requirements (model pipe system guideline MLAR 2/2015), please ...Lieske Part No.: 1348981 Mfg Part No: NSA6X50/FKK-T30V Type: NSA 6X50/FKK-T30 V |
91,11 EUR
![]() ≈ £76.17 | ≈ $100.68
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Niedax NSA6X55/SW10-M6V NSA 6X55/SW10-M6 V screw anchor SKT head thread M6 hole Ø 6 mm length 55 mm steel galvanized
Schraubanker mit Sechskantkopf und metrischem Anschlußgewinde M 6. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie ...Lieske Part No.: 691747 Mfg Part No: NSA6X55/SW10-M6V Type: NSA 6X55/SW10-M6 V |
145,63 EUR
![]() ≈ £121.75 | ≈ $160.92
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax NSA7.5X40/FKG-T30V NSA 7.5X40/FKG-T30 V screw anchor flat head drill Ø 6 mm L 40 mm steel galvanized
Schraubanker mit großem Flachrundkopf und Torxantrieb T30. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR ...Lieske Part No.: 691744 Mfg Part No: NSA7.5X40/FKG-T30V Type: NSA 7.5X40/FKG-T30 V |
149,24 EUR
![]() ≈ £124.76 | ≈ $164.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax NSA7.5X50/FKG-T30V NSA 7.5X50/FKG-T30 V screw anchor flat head drill Ø 6 mm L 50 mm steel galvanized
Schraubanker mit großem Flachrundkopf und Torxantrieb T30. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR ...Lieske Part No.: 691745 Mfg Part No: NSA7.5X50/FKG-T30V Type: NSA 7.5X50/FKG-T30 V |
180,69 EUR
![]() ≈ £151.06 | ≈ $199.66
Made to order · Delivery time approx. 20 workdaysinfo_outline
|


























