Screw in Fixing hardware
Screw from Niedax
|
Niedax GSM305 angled glide nut without cylinder head screw thread M5 height 2.5 mm
Inclined sliding nut, for fastening to C-series rail model 2913 and C-anchor rail model 2914 with slot width 11 mm and C-anchor rails model 2916 and model 2917 with slot width 12 mm, GSM... can be ...Lieske Part No.: 801450 Mfg Part No: GSM305 Type: GSM 305 |
88,63 EUR
![]() ≈ £74.09 | ≈ $97.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM306 angled glide nut without cylinder head screw thread M6 height 4 mm
The GSM 306 inclined slide nut from Niedax is a fastening element for C-series rails and C-anchor rails in the field of electrical and IT installation. It is supplied without a hex head screw and ...Lieske Part No.: 156595 Mfg Part No: GSM306 Type: GSM 306 |
56,62 EUR
![]() ≈ £47.33 | ≈ $62.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM308 angled glide nut without cylinder head screw thread M8 height 4 mm
Inclined sliding nut, for fastening to C-series rail model 2913 and C-anchor rail model 2914 with slot width 11 mm and C-anchor rails model 2916 and model 2917 with slot width 12 mm, GSM... can be ...Lieske Part No.: 572303 Mfg Part No: GSM308 Type: GSM 308 |
93,53 EUR
![]() ≈ £78.19 | ≈ $103.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM406 angled slide nut without cylinder head thread M6 height 4 mm thick
Inclined sliding nut, without cylinder head screw, for C-anchor rails, can be used at any point with a fastening screw in the profile. For anchor rails/profile rails: 2970, 2971, 2972, 2975 and 2980 ...Lieske Part No.: 176305 Mfg Part No: GSM406 Type: GSM 406 |
85,07 EUR
![]() ≈ £71.12 | ≈ $94.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM406E3 angled glide nut without cylinder head thread M6 height 4 mm
NIEDAX - Make: GSM 406 E3Schräggleitmutter, for C-rail anchor E3 2970 model with a slot width of 16 mm, GSM ... E3 at each point in the profile can be used with screw in stainless steel, material ... Lieske Part No.: 308894 Mfg Part No: GSM406E3 Type: GSM 406 E3 |
215,36 EUR
![]() ≈ £180.04 | ≈ $237.97
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM406E5 GSM 406 E5 angled glide nut without cylindrical-head screw thread M6 H4 mm stainless steel
Inclined sliding nut, without cylinder head screw, for C-anchor rails in E5, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails in E5: 2970, 2971, 2972, ...Lieske Part No.: 1313651 Mfg Part No: GSM406E5 Type: GSM 406 E5 |
221,40 EUR
![]() ≈ £185.09 | ≈ $244.65
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM408 angled slide nut without head, thread M8, height 6 mm, thick
NIEDAX - Make: GSM 408Schräggleitmutter, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with a slot width of 16 mm, GSM ... used at any point in the profile with fixing screw, ... Lieske Part No.: 171381 Mfg Part No: GSM408 Type: GSM 408 |
105,92 EUR
![]() ≈ £88.55 | ≈ $117.04
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM408E3 angled glide nut without cylinder head thread M8 height 6 mm
Inclined sliding nut, without cylinder head screw, for C-anchor rails in E3, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails in E3: 2970, 2971, 2972, ...Lieske Part No.: 410527 Mfg Part No: GSM408E3 Type: GSM 408 E3 |
294,97 EUR
![]() ≈ £246.59 | ≈ $325.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM410 angled glide nut without cylinder head screw thread M10 height 6 mm
NIEDAX - Make: GSM 410Schräggleitmutter, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with a slot width of 16 mm, GSM ... used at any point in the profile with fixing screw, galvanized ... Lieske Part No.: 348135 Mfg Part No: GSM410 Type: GSM 410 |
114,57 EUR
![]() ≈ £95.78 | ≈ $126.60
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GSM410E3 angled glide nut without hex head thread M10 height 4 mm
NIEDAX - Make: GSM 4 E3 Schräggleitmutter, for C-rail anchor 297 E3 model with slot width 6 mm, GSM ... E3 at each point in the profile can be used with screw in stainless steel, material no. .43 ... Lieske Part No.: 908317 Mfg Part No: GSM410E3 Type: GSM 410 E3 |
315,88 EUR
![]() ≈ £264.08 | ≈ $349.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GU0406 U-nut without hex head screw, thread M6, thick layer galvanized
U-sliding nut, for C-anchor channels model 2970 and 2971, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions ...Lieske Part No.: 180082 Mfg Part No: GU0406 Type: GU 0406 |
84,64 EUR
![]() ≈ £70.76 | ≈ $93.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GU204 U-nut without hex head screw, thread M4, thick layer galvanized
U-sliding nut, for C-series rail model 2910, U-sliding nut can only be used from the profile end, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x ...Lieske Part No.: 675516 Mfg Part No: GU204 Type: GU 204 |
91,58 EUR
![]() ≈ £76.56 | ≈ $101.20
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GU305 U-slide nut without hex head screw thick-layer passivated
U-sliding nut, for C-series rail model 2913 and C-anchor rail model 2914, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated.Lieske Part No.: 926913 Mfg Part No: GU305 Type: GU 305 |
116,85 EUR
![]() ≈ £97.69 | ≈ $129.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GU406 GU 406 U-slide nut without hex head screw thread M6 thick-layer passivated
U-sliding nut, for C-anchor channels model 2975 and 2980, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions ...Lieske Part No.: 1426323 Mfg Part No: GU406 Type: GU 406 |
85,83 EUR
![]() ≈ £71.75 | ≈ $94.84
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GUE406 U-slide nut hex head screw, thread M6 thick-layer galvanized
U-sliding nut, special design, for fastening to C-anchor rails model 2975 and 2980 with slot width 16 mm, GUE... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, ...Lieske Part No.: 1426300 Mfg Part No: GUE406 Type: GUE 406 |
119,89 EUR
![]() ≈ £100.23 | ≈ $132.48
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GUF204 glide nut with clamp spring plastic thread M4 thick layer
NIEDAX - Make: GUF 204. slide nut, with plastic spring clamp for C-series rail model 2910, slide nut is only from profile end use, self-adhesive, captive, galvanized according to DIN 50961, ... Lieske Part No.: 655570 Mfg Part No: GUF204 Type: GUF 204 |
1,76 EUR
![]() ≈ £1.47 | ≈ $1.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax GUF205 GUF 205 slide nut with plastic clamp spring, thread M5
Sliding nut, with plastic clamping spring, for C-series rail model 2910, sliding nut can only be used from the end of the profile, self-adhesive, captive, galvanized according to DIN EN ISO 2081, ...Lieske Part No.: 744269 Mfg Part No: GUF205 Type: GUF 205 |
1,76 EUR
![]() ≈ £1.47 | ≈ $1.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/20 hook head screw M10 L20 mm blue passivated DIN 50 961
Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: ...Lieske Part No.: 125091 Mfg Part No: HK510/20 Type: HK 510/20 |
932,90 EUR
![]() ≈ £779.90 | ≈ $1,030.85
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/30 hook head screw M10 L30 mm blue passivated DIN 50 961
NIEDAX - Make: HK 5 / 3 hook head screw M with hexagon nut and washer, anchor channels for C-Model 2985, 2986, 2988 and 299 with 8 mm slot width, galvanized to DIN ISO 4 42, blue passivated. Lieske Part No.: 925835 Mfg Part No: HK510/30 Type: HK 510/30 |
946,20 EUR
![]() ≈ £791.02 | ≈ $1,045.55
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/30E5 HK 510/30 E5 hook head screw M10 L 30 mm Est, incl. nut and washer
Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2986/... E3/E5 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head ...Lieske Part No.: 480568 Mfg Part No: HK510/30E5 Type: HK 510/30 E5 |
4.797,50 EUR
![]() ≈ £4,010.71 | ≈ $5,301.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/40 hook head screw M10 L40 mm blue passivated DIN 50 961
NIEDAX - Make: HK 510/40T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2985, 2986, 2988 and 2990 with 18 mm slot width, galvanized according to DIN ISO 4042, blue passivated. Lieske Part No.: 626654 Mfg Part No: HK510/40 Type: HK 510/40 |
990,85 EUR
![]() ≈ £828.35 | ≈ $1,094.89
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/50 hook head screw M10 L50 mm blue passivated DIN 50 961
NIEDAX - Make: HK 510/50T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2985, 2986, 2988 and 2990 with 18 mm slot width, galvanized according to DIN ISO 4042, blue passivated. Lieske Part No.: 407432 Mfg Part No: HK510/50 Type: HK 510/50 |
504,45 EUR
![]() ≈ £421.72 | ≈ $557.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/50E5 hook head screw M10 L50 mm stainless steel
Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rails 2986/... E3/E5 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head ...Lieske Part No.: 870573 Mfg Part No: HK510/50E5 Type: HK 510/50 E5 |
3.260,40 EUR
![]() ≈ £2,725.69 | ≈ $3,602.74
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Niedax HK510/50F hook head screw M10 L50 mm hot-dip galvanized DIN EN ISO 1461
Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: ...Lieske Part No.: 170384 Mfg Part No: HK510/50F Type: HK 510/50 F |
544,35 EUR
![]() ≈ £455.08 | ≈ $601.51
Made to order · Delivery time approx. 20 workdaysinfo_outline
|


























