Clamps in Fixing hardware

Designed to be used with gas pressure nailers (e.g. SPIT), e.g. for use in suspended ceilings and partition wall installations.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 7 mm Ø.
Sales unit: 50 pieces
Lieske Part No.: 225762

Designed to be used for attaching gas pressure nailers (e.g. SPIT), e.g. for use in suspended ceilings and partition wall installations.
Clamping height 9 mm - with spacer 13 mm.
Mounting hole 7 mm Ø.
Sales unit: 25 pieces
Lieske Part No.: 349089

Designed to be used for attaching gas pressure nailers (e.g. SPIT), e.g. for use in suspended ceilings and partition wall installations.
Clamping height 9 mm - with spacer 13 mm.
Mounting hole 7 mm Ø.
Sales unit: 50 pieces
Lieske Part No.: 677552

Spacer
2033 D
to increase the clamping height of 9 to 13 mm for thicker cables, halogen-free Type: 2033D


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 338298

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 50-60 cm.
Sales unit: 50 pieces
Lieske Part No.: 1775899

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 50-60 cm.
Sales unit: 100 pieces
Lieske Part No.: 1775898

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached with a knock-in dowel or gas pressure nailer. Stone gray design, flame-retardant according to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960°C. The recommended mounting distance when fully occupied is 50-60 cm.
Lieske Part No.: 1056097

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 50 pieces
Lieske Part No.: 348469

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Lieske Part No.: 788042

Collective bracket for general use, suitable for wall and ceiling mounting. The molded fastening element can be attached with a hammer anchor or gas pressure nailer.
Stone gray design, flame-retardant according to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960°C. The recommended fastening distance when fully occupied is 250 - 400 mm.
Sales unit: 50 pieces
Lieske Part No.: 899636

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 25 pieces
Lieske Part No.: 658423

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 50 pieces
Lieske Part No.: 181419

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached with a knock-in dowel or gas pressure nailer. Stone gray design, flame-retardant according to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960°C. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 25 pieces
Lieske Part No.: 332694

OBO Grip M
sandverzinkt according to DIN EN 10147th Outstanding
suitable for use in intermediate
cover, as high heat resistance, no
Problems with halogens in case of fire, no
Fire load.

Capacity
2031 M/15 max. 15 conductors NYM 3 x 1.5 mm ²
2031 M/30 max. 30 conductors NYM 3 x 1.5 mm ²

Fastening holes 6 mm, application for integrity according to DIN
4102-12 possible, please ask for documents.

Materail: Steel
Color: light gray

Type: M/15 2031
Item: 50 ST.
Lieske Part No.: 484211

OBO Grip M
sandverzinkt according to DIN EN 10147th Outstanding
suitable for use in intermediate
cover, as high heat resistance, no
Problems with halogens in case of fire, no
Fire load.

Capacity
2031 M/15 max. 15 conductors NYM 3 x 1.5 mm ²
2031 M/30 max. 30 conductors NYM 3 x 1.5 mm ²

Fastening holes 6 mm, application for integrity according to DIN
4102-12 possible, please ask for documents.

Materail: Steel
Color: light gray

Type: M/30 2031
Item: 50 ST.
Lieske Part No.: 226670

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Lieske Part No.: 954131

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 50 pieces
Lieske Part No.: 785906

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 25 pieces
Lieske Part No.: 524818

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 10 pieces
Lieske Part No.: 958676

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 50 pieces
Lieske Part No.: 436532

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 25 pieces
Lieske Part No.: 541439

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 10 pieces
Lieske Part No.: 1320365

Long tray for collective bracket type 2031/M15, for functional integrity as a cable-specific mounting variant.
Sales unit: 25 pieces
Lieske Part No.: 927900

Nail clamps for fastening 2 cables, suitable for 2 mm steel nails.
Sales unit: 100 pieces
Lieske Part No.: 844842

Adhesive clip, for clamping onto the cable, suitable for steel nails 2 mm
Sales unit: 200 pieces
Lieske Part No.: 968161

Adhesive clip, for clamping onto the cable, suitable for steel nails 2 mm
Sales unit: 200 pieces
Lieske Part No.: 388261

Iso-nail clamps
for fastening to steel needles up to 2 mm thickness,
halogen-free.
material: polypropylene
Color: gray
Cable diameter: 2-4 mm Type: 4028 2-4 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 556175

Iso-nail clamps
for mounting with steel needles to 2 mm thick,
halogen-free.
Material: Polypropylene
Color: gray
Cable diameter: 4-7 mm

Type: 4029 4-7
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 419283

Iso-nail clamps for fastening to steel needles up to 2 mm thickness, halogen-free. Material: Polypropylene Color: gray cable diameter: 7 -

mm Type: 4 3 7 -

Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 858707

Iso-nail clamps for fastening to steel needles up to 2 mm thickness, halogen-free. Material: Polypropylene Color: gray cable diameter:
4 -
4 mm Type: 4 3

-
4 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 891694

Iso-nail clamps
for mounting with steel needles to 2 mm thick,
halogen-free.
Material: Polypropylene
Color: gray
Cable diameter: 14-17 mm

Type: 4031A 14-17
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 426459

Iso-nail clamps for fastening to steel needles up to 2 mm thickness, halogen-free. Material: Polypropylene Color: gray cable diameter:
6-2 mm Type: 4 32
6-2 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 858479

Adhesive clips, clamps claws or nails Material: Polyethylene Color: light gray Cable diameter: 4-7 mm Type: 4 39 4-7 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 716470

Adhesive clips, clamps claws or nails Material: Polyethylene Color: light gray Cable diameter: 7 - mm Type: 4 4 7 -


2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 869110

Adhesive clip, for clamping onto the cable, suitable for steel nails 2 mm
Sales unit: 100 pieces
Lieske Part No.: 931138

Adhesive clips, clamps claws
or nails Material: Polyethylene


Color: light gray
Cable diameter: 17-21 mm Type: 4043/21


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 379833

Adhesive clip, for clamping onto the cable, suitable for steel nails 2 mm
Sales unit: 100 pieces
Lieske Part No.: 745237

Adhesive clips, clamps claws
without nails

Material: Polyethylene
Color: light gray
Cable diameter: 21-25 mm

Type: 4044 21-25
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 489997

Mounting clamp 3.2mm
Sales unit: 100 pieces
Lieske Part No.: 967631

Mounting clamp 5.2mm
Sales unit: 100 pieces
Lieske Part No.: 282388

Mounting clamp 6.5mm
Sales unit: 100 pieces
Lieske Part No.: 664000

Mounting clamp 8mm
Sales unit: 100 pieces
Lieske Part No.: 859174

Mounting clamp 9.5mm
Sales unit: 100 pieces
Lieske Part No.: 936431

Mounting clamp 11mm
Sales unit: 100 pieces
Lieske Part No.: 483612

Mounting clamp 12.5mm
Sales unit: 100 pieces
Lieske Part No.: 403820

Mounting clamp 14mm
Sales unit: 100 pieces
Lieske Part No.: 841679

Mounting clamp 16mm
Sales unit: 100 pieces
Lieske Part No.: 965697

Mounting clamp 17.5mm
Sales unit: 100 pieces
Lieske Part No.: 838178

Fix Nail nail without
moving up to Ø 3 and 3.5 mm steel nail
for fixation of cables in wall slots
and masonry for:
1 or 2 conductors NYM 3 x 1,5 / 2,5 mm ² or
1 or 2 lines NYM 5 x 1.5 / 2.5 mm ²


Material: Polypropylene
Color: natural

Type: 1996 / O
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 685039

With pre-assembled, galvanized steel nail Ø 3 mm or 3.5 mm for fixing cables in wall slots and on masonry for 1 or 2 cables NYM 3 x 1.5/2.5 mm² or 1 or 2 cables NYM 5 x 1.5/2.5 mm².
Sales unit: 100 pieces
Lieske Part No.: 224541