Casting resin and cable sleeves in Cable joint sets

Casting resin and cable sleeves from GT

GT 000903 A-1 GH-Verbindungsmuffe 4x10-5x6qmm o.Verbinder Anwendung: Zum Verbinden von Kunststoffkabeln ohne Ceander/Bewehrung und Leitungen mit Isolierungen aus PVC, PE, VPE und EPR. - Innenraum - Freiluft - Erdreich - Wasser - Installationskanäle ... Lieske Part No.: 490427 Mfg Part No: 000903 Type: -A1

39,91 EUR 40,03 EUR ≈ £34.28  |  ≈ $45.74 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

GT 000904 A-2 GH-Verbindungsmuffe 4x16-5x16qmm o.Verbinder Anwendung: Zum Verbinden von Kunststoffkabeln mit/ohne Ceander/Bewehrung und Leitungen mit Isolierungen aus PVC, PE, VPE und EPR. - Innenraum - Freiluft - Erdreich - Wasser - Installationskanäle ... Lieske Part No.: 490426 Mfg Part No: 000904 Type: -A2

47,15 EUR 47,32 EUR ≈ £40.50  |  ≈ $54.03 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

GT 020359 GAM 360 PUR-Gießharz Typ GA 360ml im Mischbeutel Anwendung GT Gießharz Typ GA ist ein 2-Komponenten Polyurethan-Gießharz-System und entspricht IEC 60455-3-8. Es ist geeignet zum Füllen oder Herstellen von Kabelgarnituren oder Teilen davon für: ... Lieske Part No.: 490428 Mfg Part No: 020359 Type: GAM 360

46,82 EUR 46,97 EUR ≈ £40.22  |  ≈ $53.66 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

Gel GT-through joint GTQT-3 until 20x2x0, 8 mm # 81 # Properties - With double seal - With single wire connectors - Temperature-resistant GEL from - 40 °C to +140 °C - No special tools required - Good adhesion to metals and plastics - Moulded shell ... Lieske Part No.: 264757 Mfg Part No: 180052 Type: QT3

57,83 EUR 57,94 EUR ≈ £49.68  |  ≈ $66.27 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

GT FiloSeal+ HD 110mm re-openable sealing system bore length max.D110mm 80204 Anwendung . Universelles Abdichtungssystem besonders für schwere Kabel und Rohre in Bohrungen, Mauerdurchführungen, Leerrohren o.ä. geeignet Eigenschaften . Gas- und Wasserdicht bis 2,0 bar ... Lieske Part No.: 842579 Mfg Part No: 80204 Type: FiloSeal+ HD 110mm

150,80 EUR 151,30 EUR ≈ £129.54  |  ≈ $172.82 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

GT FiloSeal+ HD 160mm re-openable sealing system bore length max.D160mm 80205 Anwendung . Universelles Abdichtungssystem besonders für schwere Kabel und Rohre in Bohrungen, Mauerdurchführungen, Leerrohren o.ä. geeignet Eigenschaften . Gas- und Wasserdicht bis 2,0 bar ... Lieske Part No.: 842939 Mfg Part No: 80205 Type: FiloSeal+ HD 160mm

240,81 EUR 241,61 EUR ≈ £206.86  |  ≈ $275.97 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

GT MD 3-110mm sealing kit 110mm 80295 Anwendung . Zum Abdichten von Mauerdurchführungen von Kabeln und Rohren, die in Leerrohren oder Durchführungen ohne räumlichen Abstand verlegt werden Eigenschaften . Gas- und Wasserdicht bis 1,0 ... Lieske Part No.: 867659 Mfg Part No: 80295 Type: MD 3-110mm

84,38 EUR 84,65 EUR ≈ £72.48  |  ≈ $96.70 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

GT MD 3-50mm sealing kit 50mm 82550 Anwendung . Zum Abdichten von Mauerdurchführungen von Kabeln und Rohren, die in Leerrohren oder Durchführungen ohne räumlichen Abstand verlegt werden Eigenschaften . Gas- und Wasserdicht bis 1,0 ... Lieske Part No.: 867874 Mfg Part No: 82550 Type: MD 3-50mm

49,77 EUR 49,93 EUR ≈ £42.75  |  ≈ $57.04 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

Casting resin and cable sleeves from Gustav Hensel

Gustav Hensel 4012591118879 Hensel GH 0350 potting compound set 350ml with nozzle Casting compound as a spare part for refilling after modifications or repairs for cable junction boxes types WP. Lieske Part No.: 705823 Mfg Part No: 4012591118879 Type: GH 0350

38,57 EUR ≈ £33.13  |  ≈ $44.20 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

Gustav Hensel 4012591118893 Hensel GH 1200 potting Set 1200ml, m.Tülle Casting compound as a spare part for refilling after modifications or repairs for cable junction boxes types WP. Lieske Part No.: 172595 Mfg Part No: 4012591118893 Type: GH 1200

68,31 EUR ≈ £58.68  |  ≈ $78.28 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

Gustav Hensel 4012591123941 Hensel GH 0500 potting Set 500ml, m.Tülle Casting compound as a spare part for refilling after modifications or repairs for cable junction boxes types WP. Lieske Part No.: 381472 Mfg Part No: 4012591123941 Type: GH 0500

45,41 EUR ≈ £39.01  |  ≈ $52.04 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

Gustav Hensel 4012591123958 Hensel GH 0850 potting compound set 850ml with nozzle Casting compound as a spare part for refilling after modifications or repairs for cable junction boxes types WP. Lieske Part No.: 573716 Mfg Part No: 4012591123958 Type: GH 0850

55,77 EUR ≈ £47.91  |  ≈ $63.91 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

Casting resin and cable sleeves from HellermannTyton

HellermannTyton 380-04005 Hellermann LVK-5x1.5-6 PO-X BK 1, shrink tubing repair sleeve Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences ... Lieske Part No.: 378054 Mfg Part No: 380-04005 Type: LVK-5x1.5-6 PO-X BK 1

17,46 EUR 18,20 EUR ≈ £15.00  |  ≈ $20.01 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04006 Hellermann LVK-5x1.5-16 PO-X BK 1, shrink tubing repair sleeve Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences ... Lieske Part No.: 378136 Mfg Part No: 380-04006 Type: LVK-5x1.5-16 PO-X BK 1

26,00 EUR 27,10 EUR ≈ £22.33  |  ≈ $29.80 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04007 Hellermann LVK-5x6-25 PO-X BK 1, heatshrink repair sleeve Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur ... Lieske Part No.: 338075 Mfg Part No: 380-04007 Type: LVK-5x6-25 PO-X BK 1

31,74 EUR 33,08 EUR ≈ £27.26  |  ≈ $36.37 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04008 Hellermann LVK-4x16-50 PO-X BK 1, shrink tubing repair sleeve Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences ... Lieske Part No.: 378172 Mfg Part No: 380-04008 Type: LVK-4x16-50 PO-X BK 1

36,50 EUR 38,04 EUR ≈ £31.35  |  ≈ $41.83 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04009 Hellermann LVK-4x25-95 PO-X BK 1, shrink tubing repair sleeve Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences ... Lieske Part No.: 378196 Mfg Part No: 380-04009 Type: LVK-4x25-95 PO-X BK 1

43,10 EUR 44,92 EUR ≈ £37.02  |  ≈ $49.39 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04010 Hellermann LVK-4x25-150 PO-X BK 1, shrink tubing repair sleeve Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences ... Lieske Part No.: 378270 Mfg Part No: 380-04010 Type: LVK-4x25-150 PO-X BK 1

58,17 EUR 60,62 EUR ≈ £49.97  |  ≈ $66.66 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04011 Hellermann LVK-4x95-300 PO-X BK 1, shrink tubing repair sleeve Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences ... Lieske Part No.: 378384 Mfg Part No: 380-04011 Type: LVK-4x95-300 PO-X BK 1

87,11 EUR 90,77 EUR ≈ £74.83  |  ≈ $99.83 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

HellermannTyton 380-04013 Hellermann LVK-C-5x1.5-6 PO-X BK heat shrink set with connector Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur ... Lieske Part No.: 370516 Mfg Part No: 380-04013 Type: LVK-C-5x1,5-6 PO-X BK

37,69 EUR 39,27 EUR ≈ £32.38  |  ≈ $43.19 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 380-04015 Hellermann LVK-C-5x6-25 PO-X BK heat shrink set with connector Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur ... Lieske Part No.: 370378 Mfg Part No: 380-04015 Type: LVK-C-5x6-25 PO-X BK

58,14 EUR 60,59 EUR ≈ £49.94  |  ≈ $66.63 Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

HellermannTyton 435-00080 Hellermann connecting sleeve SF 3x1.5-5x2.5 Two-part, impact-resistant, transparent molded shells. Compact dimensions. Defined cable diameters on the molded shells. SF system. Ready for use immediately. Longitudinally and transversely ... Lieske Part No.: 1592232 Mfg Part No: 435-00080

32,81 EUR 34,24 EUR ≈ £28.18  |  ≈ $37.60 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

HellermannTyton 435-00081 Hellermann i-1 / SF-PUR-GN connecting sleeve i-1 / SF 3x1 Two-part, impact-resistant, transparent and re-openable mold shells made of PP. Defined cable diameters on the mold shells. Transparent double-chamber bag. Integrated color change from blue to green ... Lieske Part No.: 2058194 Mfg Part No: 435-00081 Type: i-1 / SF-PUR-GN

48,66 EUR 50,77 EUR ≈ £41.80  |  ≈ $55.76 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline

HellermannTyton 435-00082 Hellermann i-2 / SF-PUR-GN connecting sleeve i-2 / SF 5x1 Two-part, impact-resistant, transparent and re-openable mold shells made of PP. Defined cable diameters on the mold shells. Transparent double-chamber bag. Integrated color change from blue to green ... Lieske Part No.: 2058196 Mfg Part No: 435-00082 Type: i-2 / SF-PUR-GN

84,36 EUR 88,03 EUR ≈ £72.47  |  ≈ $96.68 Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline