Switching units / measuring, control relay in Industrial relays and contactors
Switching units / measuring, control relay from WAGO
 |
 WAGO 857-414 JUMPFLEX signal conditioner isolation amplifier permanently built-in for voltage signal
Isolation amplifier voltage input signal current output signal supply voltage DC 24 V 6 mm width light greyLieske Part No.: 952332 Mfg Part No: 857-414 |
193,80 EUR 195,03 EUR
 ≈ £162.79 | ≈ $217.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-415 JUMPFLEX®-measurement converter isolation amplifier fixed setting
Isolation amplifier, current input signal, voltage output signal, supply voltage DC 24 V, 6 mm width, 2.50 mm² Lieske Part No.: 1881731 Mfg Part No: 857-415 |
19.380,00 EUR 19.503,00 EUR
≈ £16,279.20 | ≈ $21,744.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-416 JUMPFLEX signal conditioner isolation amplifier permanently built-in for voltage signal
JUMPFLEX® measuring transducer isolation amplifier fixed for voltage signals light grey Lieske Part No.: 952327 Mfg Part No: 857-416 |
193,80 EUR 195,03 EUR
≈ £162.79 | ≈ $217.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-424 ISO-AMP
Isolation amplifier, current and voltage input signal, supply voltage DC 24 V, 6 mm width Lieske Part No.: 1349536 Mfg Part No: 857-424 |
386,65 EUR 389,07 EUR
≈ £324.79 | ≈ $433.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-450 JUMPFLEX®-signal conditioner loop-powered isolator light gray
Loop-powered isolation amplifier, bipolar current and voltage input signal, current output signal, configuration via DIP switch, power via input, 6 mm width, 2.50 mm² Lieske Part No.: 1961429 Mfg Part No: 857-450 |
245,10 EUR 246,51 EUR
≈ £205.88 | ≈ $275.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-451 JUMPFLEX signal conditioner passive isolator 1-channel input 0(4)..20mA
Passive isolator, 1-channel, current input signal, current output signal, power via input, 6 mm width, 2.50 mm² Lieske Part No.: 1243160 Mfg Part No: 857-451 |
20.140,00 EUR 20.295,00 EUR
≈ £16,917.60 | ≈ $22,597.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-452 JUMPFLEX signal conditioner passive isolator 2-channel
Passive isolator, 2-channel, current input signal, 2 x current output signal, power via input, 6 mm width, 2.50 mm² Lieske Part No.: 918803 Mfg Part No: 857-452 |
326,80 EUR 328,68 EUR
≈ £274.51 | ≈ $366.67
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-500 JUMPFLEX frequency converter 0.1 Hz – 120 kHz
JUMPFLEX®-transducer frequency transducer 0.1 Hz ... 120 kHz light grey Lieske Part No.: 952336 Mfg Part No: 857-500 |
299,25 EUR 300,96 EUR
≈ £251.37 | ≈ $335.76
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-531 JUMPFLEX signal conditioner limit switch with analog input
JUMPFLEX® measuring transducer limit switch with analog input and changeover relay output light grey Lieske Part No.: 919034 Mfg Part No: 857-531 |
235,60 EUR 236,61 EUR
≈ £197.90 | ≈ $264.34
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-550 JUMPFLEX measuring transducer AC/DC 0..1A, 0..5A light grey
JUMPFLEX® measuring transducer current measuring transducer AC/DC 0 ... 1 A, 0 ... 5 A light grey Lieske Part No.: 952334 Mfg Part No: 857-550 |
294,50 EUR 296,01 EUR
≈ £247.38 | ≈ $330.43
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-551 current transducer DC 24 V
Current transducer, current input signal, current and voltage output signal, digital output, configuration via software, supply voltage DC 24 V, 6 mm width Lieske Part No.: 1918366 Mfg Part No: 857-551 |
274,55 EUR 276,21 EUR
≈ £230.62 | ≈ $308.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-552 JUMPFLEX-Measurement converter Rogowski-measurement converter RC1 500 A
Current transducer, input for Rogowski coils, current and voltage output signal, digital output, configuration via software, supply voltage DC 24 V, 6 mm width, 2.50 mm² Lieske Part No.: 987871 Mfg Part No: 857-552 |
294,50 EUR 296,01 EUR
≈ £247.38 | ≈ $330.43
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-560 JUMPFLEX voltage measuring transducer configurable
Voltage transducer, voltage input signal, current and voltage output signal, digital output, configuration via software, supply voltage DC 24 V, 6 mm width Lieske Part No.: 1588143 Mfg Part No: 857-560 |
407,55 EUR 409,86 EUR
≈ £342.34 | ≈ $457.27
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-800 JUMPFLEX-Messumformer temperature transmitter Pt100/Pt200
JUMPFLEX®-transducer temperature transducer Pt100, Pt200, Pt500 and Pt1000 as well as resistors 0 ... 1 kOhm, 0 ... 4.5 kOhm light grey Lieske Part No.: 613779 Mfg Part No: 857-800 |
220,40 EUR 221,76 EUR
≈ £185.14 | ≈ $247.29
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
WAGO 857-801 JUMPFLEX temperature transmitter Pt100/Pt200
Temperature transmitter for RTD sensors, current and voltage output signal, configuration via software, supply voltage DC 24 V, 6 mm width, light grey Lieske Part No.: 908618 Mfg Part No: 857-801 |
291,65 EUR 293,04 EUR
≈ £244.99 | ≈ $327.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-808 Temp. MU PT46 U. CU53 signal conditioner
Temperature transmitter for RTD sensors, current and voltage output signal, supply voltage DC 24 V, 6 mm width Lieske Part No.: 1941312 Mfg Part No: 857-808 |
33.440,00 EUR 33.660,00 EUR
≈ £28,089.60 | ≈ $37,519.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-809 JUMPFLEX transducer potentiometer transducer light gray
Potentiometer position transducer, current and voltage output signal, digital output, configuration via software, supply voltage DC 24 V, 6 mm width, 2.50 mm² Lieske Part No.: 535615 Mfg Part No: 857-809 |
291,65 EUR 293,04 EUR
≈ £244.99 | ≈ $327.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-810 JUMPFLEX temperature transmitter thermocouples
JUMPFLEX®-transducer temperature transmitter thermocouples type J, K light grey Lieske Part No.: 908807 Mfg Part No: 857-810 |
237,50 EUR 238,59 EUR
≈ £199.50 | ≈ $266.48
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-811 JUMPFLEX® temperature transmitter thermocouples
JUMPFLEX®-transducer temperature transmitter thermocouples type J, K light grey Lieske Part No.: 908628 Mfg Part No: 857-811 |
306,85 EUR 308,88 EUR
≈ £257.75 | ≈ $344.29
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-812 JUMPFLEX temperature transmitter thermocouple
Temperature transmitter, for thermocouples, current and voltage output signal, configuration via DIP switch, supply voltage DC 24 V, 6 mm width Lieske Part No.: 1947721 Mfg Part No: 857-812 |
237,50 EUR 238,59 EUR
≈ £199.50 | ≈ $266.48
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-815 JUMPFLEX temperature transmitter
Temperature transmitter for RTD sensors, current output signal, power via output, 6 mm width Lieske Part No.: 1949391 Mfg Part No: 857-815 |
31.730,00 EUR 31.878,00 EUR
≈ £26,653.20 | ≈ $35,601.06
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-818 JUMPFLEX®-measurement transmitter Ni-measurement transmitter for Ni100 120 200 500 100
Temperature transmitter for Ni sensors, current and voltage output signal, configuration via software, supply voltage DC 24 V, 6 mm width, light grey Lieske Part No.: 949593 Mfg Part No: 857-818 |
306,85 EUR 308,88 EUR
≈ £257.75 | ≈ $344.29
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-819 JUMPFLEX measuring transducer millivolt measuring transducer
Voltage transducer, bipolar voltage input signal, current and voltage output signal, configuration via software, supply voltage DC 24 V, 6 mm width, 2.50 mm² Lieske Part No.: 919082 Mfg Part No: 857-819 |
266,95 EUR 268,29 EUR
≈ £224.24 | ≈ $299.52
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 857-820 JUMPFLEX®-signal conditioner KTY-signal conditioner input signal: KTY sensors lgr
Temperature transmitter for KTY sensors, current and voltage output signal, configuration via DIP switch, supply voltage DC 24 V, 6 mm width, light grey Lieske Part No.: 359976 Mfg Part No: 857-820 |
291,65 EUR 293,04 EUR
≈ £244.99 | ≈ $327.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|