Terminals in Connection technology

Distribution block, block with horizontal alignment and integrated feed, nominal voltage: 690 V, nominal current: 24 A, number of connections: 13, connection type: push-in connection, tap, cross-section: 0.14 mm² - 4 mm², push-in connection, collective connection, rated cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting type: NS 15, color: white
Sales unit: 8 pieces
Lieske Part No.: 1139782

Distribution block, block with horizontal alignment and integrated feed, nominal voltage: 690 V, nominal current: 24 A, number of connections: 13, connection type: push-in connection, tap, cross-section: 0.14 mm² - 4 mm², push-in connection, collective connection, rated cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting type: NS 15, colour: black
Sales unit: 8 pieces
Lieske Part No.: 1139725

Distribution block, block with horizontal alignment and integrated feed, nominal voltage: 690 V, nominal current: 24 A, number of connections: 13, connection type: push-in connection, tap, cross-section: 0.14 mm² - 4 mm², push-in connection, collective connection, rated cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting type: NS 15, color: violet
Sales unit: 8 pieces
Lieske Part No.: 1139783

Distribution block, block with horizontal alignment and integrated feed, nominal voltage: 690 V, nominal current: 24 A, number of connections: 13, connection type: push-in connection, tap, cross-section: 0.14 mm² - 4 mm², push-in connection, collective connection, rated cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting type: NS 15, color: pink
Sales unit: 8 pieces
Lieske Part No.: 1139797

Distribution block, block with horizontal alignment and integrated feed, nominal voltage: 690 V, nominal current: 24 A, number of connections: 13, connection type: push-in connection, tap, cross-section: 0.14 mm² - 4 mm², push-in connection, collective connection, rated cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting type: NS 15, color: orange
Sales unit: 8 pieces
Lieske Part No.: 1139798

Distribution block, block with horizontal alignment and integrated feed, nominal voltage: 690 V, nominal current: 24 A, number of connections: 13, connection type: push-in connection, tap, cross-section: 0.14 mm² - 4 mm², push-in connection, collective connection, rated cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting type: NS 15, color: black/yellow
Sales unit: 8 pieces
Lieske Part No.: 1139795

Verteilerblock, Block mit waagerechter Ausrichtung und integrierter Einspeisung, Nennspannung: 690 V, Nennstrom: 24 A, Anzahl der Anschlüsse: 19, Anschlussart: Push-in-Anschluss, Abgriff, Querschnitt: 0,14 mm²-4 mm², Push-in-Anschluss, Sammelanschluss, Bemessungsquerschnitt: 6 mm², Querschnitt: 0,5 mm²-10 mm², Montageart: NS15, Farbe: grau Verkaufseinheit: 8 ST.
Sales unit: 8 pieces
Lieske Part No.: 690418

Assortment box, 12 compartments external dimensions 335 x 225 x 55 mm, material: Polystyrene
Lieske Part No.: 495800

Einlegebrücke, Rastermaß: 6,2 mm, Polzahl: 6, Farbe: grau Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 490405

Insertion bridge, Number of positions: 3, Color: gray
Sales unit: 10 pieces
Lieske Part No.: 809048

Cover profile, for covering terminal strips, snaps onto cover profile carrier AP 2-TU, can be marked with insert strip AP-ES. Cover profile carriers should be placed at the ends and at intervals of approx. 40 cm. Length: 1 m
Sales unit: 32 pieces
Lieske Part No.: 225531

Cover profile carrier for mounting on NS 32 or NS 35/7.5 DIN rail for attaching the cover profile AP 2.2 mm thick
Sales unit: 50 pieces
Lieske Part No.: 361349

Cover profile, for covering terminal strips, snaps onto cover profile carrier AP 3-TU, AP 3-TNS 35, can be marked with insert strip AP-ES. Cover profile carriers should be placed at the ends and at intervals of approx. 40 cm. Length: 1 m
Lieske Part No.: 909646

Cover profile carrier for mounting on NS 32 or NS 35/7.5 DIN rail for attaching the cover profile AP 3.2 mm thick
Lieske Part No.: 294965

Sealable cover profile, for mounting on NS 35/7.5 DIN rail, for fixing the cover profile AP 3, with plastic knurled nut M5, space requirement: 13 mm
Lieske Part No.: 930831

Insert strip, white, unlabeled, Mounting type: Insert, Lettering field: 35 x 500 mm
Sales unit: 10 pieces
Lieske Part No.: 573311

Hinged cover profile, permits hinged covering of terminal strips when used with cover holder APK-TU and holding profile APK-HP; snaps into the holding profile APK-HP, dimensions: 95 x 50 mm
Sales unit: 10 pieces
Lieske Part No.: 334249

Cover profile holder, 10 mm wide, for mounting on NS 32 or NS 35/7.5, for fixing the holding profile APK-HP, labeling with Zack strip ZB 10
Sales unit: 10 pieces
Lieske Part No.: 208901

Holding profile, snaps into the cover holder APK-TU, with groove for Zack strip ZB 5 to ZB 10, length: 2 m
Sales unit: 2 meters
Lieske Part No.: 914883

Isolating connector, can be used in UK...-TG, UKK...-TG, UDK...-TG, MBK...-TG, DIK...-TG, DOK...-TG, and ZFK...-TG disconnect terminal blocks, color: gray
Sales unit: 50 pieces
Lieske Part No.: 540409

Führungsleiste für Steckkartenblöcke SKBI64... Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 1244309

Bodenplatte für Steckkartenbblöcke SKBI 64... Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 1244200

Montagematerial, Polzahl: 0, Artikelfamilie: ZUBEHOER, Rastermaß: 0 mm, Verpackungsart: verpackt im Karton Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 124419

Bridge screw, M3, Length: 30.3 mm, Width: 4.75 mm, Color: blue
Sales unit: 100 pieces
Lieske Part No.: 822756

Bridge screw, M3, Length: 30.3 mm, Width: 4.75 mm, Color: red
Sales unit: 100 pieces
Lieske Part No.: 822811

Bridge, pitch: 6.15 mm, number of poles: 100, length: 613 mm, colour: silver
Sales unit: 100 pieces
Lieske Part No.: 611247

Insert bridge, pitch: 6 mm, number of poles: 10, pin assignment: 1,4,7,10, colour: grey
Sales unit: 10 pieces
Lieske Part No.: 1427198

Contactor marker – zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, Lettering field: 20 mm x 8 mm
Sales unit: 50 pieces
Lieske Part No.: 377048

Fabric label sheet, Sheet, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Adhesive, Lettering field: 20 mm x 8 mm
Sales unit: 10 pieces
Lieske Part No.: 807187

Fabric label sheet, Sheet, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Adhesive, Lettering field: 15 x 9 mm
Sales unit: 10 pieces
Lieske Part No.: 154494

End cover, Length: 43 mm, Width: 1.5 mm, Color: gray
Sales unit: 50 pieces
Lieske Part No.: 548251

Label sheet, DIN A4, Sheet, yellow, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 18 x 8 mm
Sales unit: 10 pieces
Lieske Part No.: 143199

Label sheet, DIN A4, Sheet, yellow, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 15 x 9 mm
Sales unit: 10 pieces
Lieske Part No.: 935255

Protective conductor terminal block, number of connections: 4, connection type: screw connection, 1st and 2nd level, cross section: 0.2 mm² - 4 mm², mounting type: NS 35/7.5, NS 35/15, colour: green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1426855

Cover profile, Length: 1000 mm, Color: transparent
Sales unit: 10 pieces
Lieske Part No.: 796203

Plastic mounting bracket, with NS 35/7.5 DIN rail, to snap onto modular terminal blocks with a universal foot, profile length: 35 mm
Sales unit: 10 pieces
Lieske Part No.: 233023

Connecting spring
Sales unit: 10000 pieces
Lieske Part No.: 1234084

Anschlussfeder Verkaufseinheit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 492528

Thermospannungsklemmenpaar, TC Typ N, Nennspannung: 400 V, Nennstrom: 1 A, Anzahl der Anschlüsse: 4, Polzahl: 2, Anschlussart: Schraubanschluss, 1. Etage, Querschnitt: 0,2 mm²-4 mm², Montageart: NS35/7,5, NS35/15, NS32, Farbe: grau Verkaufseinheit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 490551

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Sales unit: 100 pieces
Lieske Part No.: 396412

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Sales unit: 100 pieces
Lieske Part No.: 101095

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Sales unit: 100 pieces
Lieske Part No.: 850342

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Sales unit: 100 pieces
Lieske Part No.: 789775

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 7.5 x 5.6 mm
Sales unit: 50 pieces
Lieske Part No.: 849799

Chisel, for engraving spindle CMS-GRAVUR KGS 1, hard metal, cutting width: 1.5 mm
Lieske Part No.: 816987

Depth regulation sleeve for CMS-GRAV-PGS, material: Polished chrome-plated brass, inner diam. opening: 11.5 mm, outer diam. opening: 15 mm
Lieske Part No.: 196919

Tool magazine insert, replacement tool receptacle for the tool magazine
Lieske Part No.: 928492

Replacement collet chuck, for processing tools with a 3 mm shaft diameter
Lieske Part No.: 907659

Ink ribbon, not for PSS shrink sleeves, length: 91 m, width: 110 mm, printing color: black
Lieske Part No.: 789381

Marker pen, incl. adapter, ink tank and reservoir, 0.25 mm nib
Lieske Part No.: 185305