Gira 206705 G1 230V Glass Black

Gira G1 230 VGlas BlackThe Gira G1 is a multifunctional room control device for visualizing and operating a wide range of building functions. For use in the KNX system and in the Gira door communication system or as a client. The respective range of functions depends on the firmware used.For the exact range of functions, please refer to the Gira online catalog and the technical device documentation.Features: Operation is via a gesture-capable multi-touch display. Connection and communication depends on the variant via LAN or WLAN. Integrated loudspeaker. Integrated microphone with echo compensation. Possible uses and combinations: The Gira G1 as a multifunctional room control device provides the following functions or combinations of functions: KNX room control device Home station Video client for the following systems Server - HomeServer ? eNet ? X1 security system Alarm Connect Integration of Internet servicesProperties as a KNX room control device: Intuitive user interface that can be customized by the end user. Switching, pressing, dimming (relative and absolute), dimming (including dimming RGB, RGBW and tunable white), blind and roller shutter control, value transmitter, scene extension. Status display, display of date and time, display of indoor and outdoor temperature. Up to 150 functions (six function folders or rooms with up to 25 functions each). Up to 125 weekly timers with 10 switching times each. Room temperature controller in combination with the optionally available temperature sensor module or KNX devices for room temperature measurement, e.g. touch sensor 3 comfort. Operating modes: comfort, standby, night and frost or heat protection, each with its own temperature setpoints (for heating and/or cooling). Operating modes can be individually adapted. A heating clock as a weekly timer with 28 switching times. Room temperature controller extension for controlling air conditioning systems (fan coil) in conjunction with a KNX gateway for air conditioning systems. Supports KNX Data Secure and KNX IP Secure.Properties as a home station video: Camera switching: targeted selection of the connected color cameras. Control of the door opener. Switching the ringtone on and off. Ringtone can be selected from 10 melodies.Properties as a home station with SIP client: Client function for third-party SIP systems from e.g. Comelit, TCS, SCHÜCO DCS Touch, 2N. SIP direct calls or via registrar possible 64 internal calls possible e.g. to the concierge Early Media support for video imagesIntegration of Internet services: Gira weather portal: Display of the weather forecast for up to five locations (Internet connection required).The Gira G1 can also be used as a client for the following systems Server: HomeServer client eNet client X1 client Alarm Connect security system When functioning as a client, the functions of the KNX room control unit are not available. For the exact range of functions, please refer to the Gira online catalog and the technical device documentation.Gira G1 with flush-mounted connection module 230 V WLAN. Data communication via WLAN. Notes: Only suitable for indoor use. Recommended installation height: 150 cm from the floor. Installation takes place on a deep device box (electronics box recommended for LAN connection). Communication with the KNX installation takes place exclusively via the KNXnet IP standard. A KNX IP router must be used to connect the Gira G1 PoE to the KNX installation. Several Gira G1s can be operated on a KNX IP router. To connect the Gira G1 230 V or G1 24 V to the KNX installation, a Gira KNX IP router (from firmware version 3) is required to ensure reliable communication in the WLAN. For this purpose, the Gira KNX IP router (from firmware version 3) is specially equipped with the additional function 'Reliable data communication'. Several Gira G1s can be operated on a Gira KNX IP router (from firmware version 3). Commissioning in the KNX system from ETS 5.5 or higher