EIB material in Home Automation
Top sellers in EIB material
ABB GHQ4030001R0012 SWM4RNwater detector 12V w.
relais
99,80 EUR
Berker 75163099 push button 3times 7516 30 99, standard
polar white
92,17 EUR
Berker 75900081 label 7590 0081, for 4-way touch sensors B.
IQ
17,13 EUR
Berker 75900082 Labeling fieldfor B.IQ touch sensors 5-fold
B.IQ clear transparent
22,57 EUR
Berker 294810 Time relayswitch insert, home
electronics
86,13 EUR
Berker 75163599 touch sensor3f comfort B.IQ polar white
matt
127,02 EUR
Berker 75164594 Push-button4-gang comfort, aluminum B.
IQ
223,44 EUR
EIB material from ABB
|
ABB 2CDG110002R0011 SA/M2.6.1 Switch Actuator, 2F, 6A
Module for plugging into the room controller basic unit. It switches currents of up to 16 A using two relays. The maximum continuous current is 6 A. Extensive functions, e.g. logic, time functions, ...Lieske Part No.: 623694 Mfg Part No: 2CDG110002R0011 Type: SA/M2.6.1 |
91,08 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110003R0011 JA/M2.230.1 Shutter Act Mod, 2F, 230VAC
Module for plugging into the room controller base unit. It controls two independent blind or roller shutter drives with 115/230 V AC. Special functions: moving into position and automatic sun protection.Lieske Part No.: 917106 Mfg Part No: 2CDG110003R0011 Type: JA/M2.230.1 |
142,56 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB JA/M2.24.1 Blind act.mod, 2F, 24VD 2CDG110004R0011
Module for plugging into the room controller base unit. It controls two independent blind or roller shutter drives with 24 V DC. Special functions: moving into position and automatic sun protection.Lieske Part No.: 1315805 Mfg Part No: 2CDG110004R0011 Type: JA/M2.24.1 |
163,35 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110005R0011 BE/M4.230.1 Binary Input Mod, 4F, 230V
Module for plugging into the room controller base unit. It has 4 inputs for connecting 230 V contacts (AC or DC). The voltage is provided by the module.Lieske Part No.: 890244 Mfg Part No: 2CDG110005R0011 Type: BE/M4.230.1 |
149,49 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110006R0011 BE/M4.24.1 Binary Input Mod, 4F, 24V
Module for plugging into the room controller base unit. It has 4 inputs for connecting 12/24 V contacts (AC or DC). The voltage must be provided externally.Lieske Part No.: 951628 Mfg Part No: 2CDG110006R0011 Type: BE/M4.24.1 |
149,49 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110007R0011 BE/M4.12.1 Binary Input Mod, 4F, Scan
Module for plugging into the room controller basic unit. It has 4 inputs for connecting potential-free contacts.Lieske Part No.: 229861 Mfg Part No: 2CDG110007R0011 Type: BE/M4.12.1 |
149,49 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110013R0011 ES/M2.230.1 Elec Switch Act Mod 2F 230V
Module for plugging into the room controller basic unit. It has two overload-proof, noiseless and wear-free outputs for controlling electrothermal heating actuators with a voltage of 230 V AC/DC, max.Lieske Part No.: 601555 Mfg Part No: 2CDG110013R0011 Type: ES/M2.230.1 |
194,04 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB ES/M2.24.1 Electrical switching act.mod, 2F, 2 2CDG110014R0011
Module for plugging into the room controller basic unit. It has two overload-proof, noiseless and wear-free outputs for controlling electrothermal heating actuators with a voltage of 12/24 V AC/DC, ...Lieske Part No.: 1315804 Mfg Part No: 2CDG110014R0011 Type: ES/M2.24.1 |
194,04 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110024R0011 SCM/S1.1 Security Module
provides logic functions to link KNX devices (e.g. security terminals) to a security system. Up to 64 alarm groups can be monitored via communication objects. Arming, operation and display are also ...Lieske Part No.: 311437 Mfg Part No: 2CDG110024R0011 Type: SCM/S1.1 |
353,43 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110025R0011 DG/S8.1 DALI Gateway, 8fold
Single-master DALI controller according to DALI (EN 62386) trademarked, controls up to 128 standard DALI participants (DT0) according to DALI or DALI-2. 8 separate, independent DALI channels are ...Lieske Part No.: 183142 Mfg Part No: 2CDG110025R0011 Type: DG/S8.1 |
386,10 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110028R0011 JA/S4.SMI.1M Shutter Act Man, 4F, SMI
Digitally controls 4 independent groups with up to 4 SMI roller shutter or blind drives each via ABB i-bus®. Functions: Up/down, slat adjustment/stop, moving to position, automatic sun protection and ...Lieske Part No.: 212590 Mfg Part No: 2CDG110028R0011 Type: JA/S4.SMI.1M |
407,88 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110029R0011 DR/S4.1 Choke
The choke decouples the bus line from the power supply. It can be used in conjunction with the power supply SV/S 30.640.5 to supply a second EIB line. The choke has a reset button for releasing the ...Lieske Part No.: 705132 Mfg Part No: 2CDG110029R0011 Type: DR/S4.1 |
57,72 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110058R0011 ES/S4.1.2.1 Electr. Switch Actuator,4f,1A
The electronic switching actuators control thermoelectric and motor (3-point) actuators in heating/cooling systems and silently switch any load up to 1 A at 24..230 V AC/DC. The semiconductor outputs ...Lieske Part No.: 521296 Mfg Part No: 2CDG110058R0011 Type: ES/S4.1.2.1 |
375,21 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110059R0011 ES/S8.1.2.1Elect.SwitchAct. 8-fold, 1A, MDRC
The electronic switching actuators control thermoelectric and motor (3-point) actuators in heating/cooling systems and silently switch any load up to 1 A at 24..230 V AC/DC. The semiconductor outputs ...Lieske Part No.: 288789 Mfg Part No: 2CDG110059R0011 Type: ES/S8.1.2.1 |
719,73 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110060R0011 DSM/S1.1 Diagnosis and Protection Module
The DSM/S diagnostic and protection module enables a quick diagnosis of the bus status and displays telegram traffic via an LED. A bus failure (U<Umin) can be reported via a changeover contact. The ...Lieske Part No.: 414872 Mfg Part No: 2CDG110060R0011 Type: DSM/S1.1 |
78,21 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
ABB 2CDG110065R0011 US/U12.2 Universal Interface, 12fold
The universal interface has 12 channels, each of which can be configured as an input or output. Conventional buttons and LEDs, e.g. from an operating/display panel, can be connected. The connecting ...Lieske Part No.: 247125 Mfg Part No: 2CDG110065R0011 Type: US/U12.2 |
161,37 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110066R0011 EUB/S1.1 EIB Monitoring Unit
Monitors up to 100 devices in KNX systems, which can be divided into 5 groups. Bus participants are monitored for presence and minimum functionality (sending and receiving). Monitoring can be done via ...Lieske Part No.: 689116 Mfg Part No: 2CDG110066R0011 Type: EUB/S1.1 |
584,10 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110067R0011 BDB/S 1.1 Data Logging Unit
Records switching cycles and operating hours of devices in a decentralized manner for planning maintenance or determining service life. Limit values can be set for each of the up to 35 monitoring ...Lieske Part No.: 360844 Mfg Part No: 2CDG110067R0011 Type: BDB/S1.1 |
584,10 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110070R0011 NTU/S12.2000.1 Uninterruptible PSU 12V
to provide an uninterruptible SELV 12 V DC supply with a max. output current of 2 A. Particularly suitable for supplying security technology components or as an auxiliary power supply for KNX devices.Lieske Part No.: 120812 Mfg Part No: 2CDG110070R0011 Type: NTU/S12.2000.1 |
345,51 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110071R0011 UK/S32.2 Universal I/O Conc., 32F, MDRC
The universal I/O concentrator is used to connect buttons or signal lamps, e.g. in an operating and display panel. It has 32 channels that can be individually configured as inputs or outputs. Requires ...Lieske Part No.: 335761 Mfg Part No: 2CDG110071R0011 Type: UK/S32.2 |
521,73 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
ABB 2CDG110072R0011 ABZ/S 2.1 Application Unit Time
Offers a yearly timer with 15 daily schedules (800 switching times), weekly schedule and 100 special days. In addition, up to 300 group members can be created in 30 groups, which can be called up via ...Lieske Part No.: 850177 Mfg Part No: 2CDG110072R0011 Type: ABZ/S2.1 |
378,18 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110073R0011 ABL/S2.1 Application Unit Logic
Enables the creation of extensive logic functions by combining various logic and time gates on a graphical user interface as a plug-in from ETS3. No additional software is required. 50 logic functions ...Lieske Part No.: 330896 Mfg Part No: 2CDG110073R0011 Type: ABL/S2.1 |
518,76 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110079R0011 SD/S2.16.1 Switch-/Dim Act, 2f, 16A,MDRC
REG devices for switching and dimming via ABB i-bus® of 2, 4 or 8 independent lighting groups from electronic ballasts with 1-10V control interface. For each channel, the supply voltage of the ...Lieske Part No.: 235384 Mfg Part No: 2CDG110079R0011 Type: SD/S2.16.1 |
275,22 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
ABB 2CDG110080R0011 SD/S4.16.1 Switch-/Dim Act, 4f, 16A,MDRC
REG devices for switching and dimming via ABB i-bus® of 2, 4 or 8 independent lighting groups from electronic ballasts with 1-10V control interface. For each channel, the supply voltage of the ...Lieske Part No.: 647230 Mfg Part No: 2CDG110080R0011 Type: SD/S4.16.1 |
402,93 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|


























