Products of PRIO
Categories with products from PRIO
- Electrics ➤ Installation ➤ Fire barriers, fire protection compound ( 1 )
- Electrics ➤ Installation ➤ Install Outlets and Accessories ➤ For brick / hollow wall / concrete installation boxes ( 31 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 1 )
- Electrics ➤ Installation ➤ Pipes ➤ PVC - Conduit Accessories ( 9 )
- Technology ➤ Tools ➤ Miscellaneous ( 46 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 6 )
|
PRIO P752M P752MPRIO P752M Primo Magnet for nailer The nailing aid for concrete construction products makes it easier to nail the cans. The 40 cm nailer nails the lid and cans to the formwork without injuring your fingers - even if the second ... Lieske Part No.: 679728 Mfg Part No: P752M |
16,35 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P753 P753PRIO P753 Primo End and transition grommet M20/M25 with wings The P753 end and transition grommets are multifunctional for pipe sizes M20 and M25 and enable reliable continuation of the pipes as well as secure strain relief. Thanks to their large adhesive ... Lieske Part No.: 679729 Mfg Part No: P753 |
2,36 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P754 P754PRIO P754 Primo end and transition grommet M20/M25 Multifunctional and suitable for pipe sizes M20 and M25, the P754 end and transition grommets ensure safe strain relief and thus prevent pipes from being lost. Slipping is also impossible thanks to ... Lieske Part No.: 679731 Mfg Part No: P754 |
1,09 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P755 P755PRIO P755 Primo Primo wall and ceiling bend 30° M32/M40 with wings The P755 wall and ceiling bends are suitable as multifunctional end transitions for pipe sizes M32 and M40 and ensure safe strain relief for the continuation of pipes of the above sizes. Thanks to ... Lieske Part No.: 679734 Mfg Part No: P755 |
131,15 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P756 P756PRIO P756 Primo wall and ceiling bend 30° M32/M40 The P756 wall and ceiling bends are multifunctional and suitable for pipe sizes M32 and M40 and ensure easier cable pulling and safe strain relief even over long distances. Also practical: the bends' ... Lieske Part No.: 679736 Mfg Part No: P756 |
214,60 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P760 P760PRIO P760 Primo membrane socket M1 60 Our M1 60 membrane box ensures safe strain relief and time-saving pipe insertion. The final installation can be carried out quickly, primarily due to the larger clamping space. With the help of the ... Lieske Part No.: 2094056 Mfg Part No: P760 |
201,16 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P760DPRIO P760D Primo Deckel für Membrandose M1 60 Als Betondose mit Membranen ist bei derPrimo Membrandose M1 60eine werkzeuglose Kabel- und Rohreinführung für M20, M25 und M32 möglich. Die Membran umschließt dasRohrabsolut betondicht. Der ... Lieske Part No.: 1246970 Mfg Part No: P760D |
90,52 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P761 P761PRIO P761 Primo wings for M and XL series The wings allow the M1 60 membrane box to be attached directly to the steel reinforcement. Neither a counter bearing nor a support element is required for attachment to the formwork. The special ... Lieske Part No.: 2094057 Mfg Part No: P761 |
30,34 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P762 P762PRIO P762 Primo clip-on frame membrane box Not enough clamping space in the box? Reinforcement directly in front of the entries? To avoid these problems, Primo has developed the clip-on frame for its membrane box. This product extends the ... Lieske Part No.: 2094058 Mfg Part No: P762 |
77,54 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P763 P763PRIO P763 Primo membrane socket M1 35 As a light connection box with membranes, the Primo membrane box M1 35 allows tool-free cable and pipe entry for M20, M25 and M32. The membrane encloses the pipe absolutely concrete-tight. The ... Lieske Part No.: 2094059 Mfg Part No: P763 |
223,93 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P772PRIO P772 Primo Zentrierbohrer SDS Adpater Durch seine 5 Crusher ist der Zentrierbohrer das perfekte Produkt zum Bearbeiten von armiertem Beton.Der aggressiv geformte Bohrkopf mit 5 Crushern setzt neue Maßstäbe beim Bohren von armiertem ... Lieske Part No.: 1246971 Mfg Part No: P772 |
6,32 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P773 P773PRIO P773 Primo equipment carrier GET-80 The GET-80 device carrier is an attachment for the flush-mounted boxes of the Primo thermobox series, as well as for the concrete boxes of the M1 membrane box series. With a large mounting surface of ... Lieske Part No.: 2094060 Mfg Part No: P773 |
38,77 EUR 38,78 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P774 P774PRIO P774 Primo thermal can THD-45 The Primo THD-45 thermobox with a diameter of 60 mm eliminates the need for time-consuming plastering as with conventional flush-mounted boxes. The THD-45 thermobox is installed quickly and easily in ... Lieske Part No.: 2094061 Mfg Part No: P774 |
79,69 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P775 P775PRIO P775 Primo thermal electronic box TED-70 With the Primo thermoelectronic box, there is no need for the laborious plastering required with conventional flush-mounted boxes. The lid can be opened as required. The special design enables a ... Lieske Part No.: 2094062 Mfg Part No: P775 |
115,52 EUR 115,53 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P779 P779PRIO P779 Primo Bohr-Fixx for hole saws from 38-127mm With our Bohr-Fixx-P779, drilling is now even quicker and easier. The anti-clockwise rotation of the screwdriver means that the drill core is ejected fully automatically. The hole saw adapter also ... Lieske Part No.: 679758 Mfg Part No: P779 |
152,78 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P779-02 P779-02PRIO P779-02 Primo countersink 68mm The clever tool for flush-mounted socket holes. The Primo countersinker enables precise drilling in all drywall materials. Whether plasterboard, softwood or chipboard. The cutter with a diameter of 68 ... Lieske Part No.: 683300 Mfg Part No: P779-02 |
15,46 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P779-03PRIO P779-03 Primo Randversenker 74mm Verkaufseinheit: 1 ST. Lieske Part No.: 1247315 Mfg Part No: P779-03 |
15,70 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P790 P790PRIO P790 Primo pipe marker roll up red M25/M32 alarm system/fire alarm system Quickly installed and securely sealed! The pipe markers are suitable for 25 mm and 32 mm flexible pipes, as well as rigid pipes. These can be labeled with a waterproof pen. The pipe markers are ... Lieske Part No.: 679759 Mfg Part No: P790 |
27,63 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P792 P792PRIO P792 Primo Pipe Marker roll up Green M25/M32 Antenna Quickly installed and securely sealed! The pipe markers are suitable for 25 mm and 32 mm flexible pipes, as well as rigid pipes. These can be labeled with a waterproof pen. The pipe markers are ... Lieske Part No.: 679761 Mfg Part No: P792 |
27,63 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P793 P793PRIO P793 Primo Pipe Marker roll up Orange M25/M32 Telephone Data Technology Quickly installed and securely sealed! The pipe markers are suitable for 25 mm and 32 mm flexible pipes, as well as rigid pipes. These can be written on with a waterproof pen. These can be written on ... Lieske Part No.: 679762 Mfg Part No: P793 |
27,63 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P794 P794PRIO P794 Primo Bohr-Fixx set with 68mm hole saw holder, center drill The Bohr-Fixx set contains the following products: 1 piece Bohr-Fixx (P794), 1 piece hole saw 68 mm (P797) and 1 piece center drill (P831). Lieske Part No.: 679763 Mfg Part No: P794 |
182,71 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P794-74PRIO P794-74 Primo Bohr-Fixx Set 74mm Verkaufseinheit: 1 ST. Lieske Part No.: 1247314 Mfg Part No: P794-74 |
177,40 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
PRIO P796 P796PRIO P796 Primo Scarffix 140x160mm The Schalfix is a recyclable plastic box that is used to make it easier to create recesses. Instead of making individual wooden or polystyrene recesses, the Schalfix is suitable as a water- and ... Lieske Part No.: 679764 Mfg Part No: P796 |
192,85 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
PRIO P797 P797PRIO P797 Primo core bit 68mm for Bohr-Fix Core bit 68 mm for Bohr-Fixx Lieske Part No.: 679768 Mfg Part No: P797 |
30,40 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|









